Reconfigurable NDI controller using inertial sensor failuredetection & isolation

A modified derivation of nonlinear dynamic inversion provides the theoretical underpinnings for a reconfigurable control law for aircraft that have suffered combinations of actuator failures, missing effector surfaces, and aerodynamic changes. The approach makes use of acceleration feedback to extract information pertaining to any aerodynamic change and thus does not require a complete aerodynamic model of the aircraft. The control law does require feedback of effector positions to accommodate actuator dynamics. Both accelerometer and rate gyro failure detection and isolation (FDI) systems are implemented, allowing up to three independent failures for each FDI system as long as they are in different axes. Nonlinear simulation results show that the FDI systems improve the robustness to accelerometer/rate gyro uncertainties. An advanced tailless aircraft model is used to demonstrate the concepts. The simulation includes accelerometer and rate gyro noise and bias, failures due to accelerometers, rate gyros, and actuators, and modeled missing surfaces that cause airplane aerodynamic changes     

Electric currents induced inside biological cells by geomagnetic and atmospheric phenomena.

An increasing number of studies have appeared in the last ten years indicating that some pathologies may correlate with geomagnetic activity and cosmic rays. However a physical mechanism binding both phenomena has not been proposed. In the present work we obtain the amplitude of the magnetic fields at different frequencies, that may induce inside biological cells currents of the same magnitude of the currents generated by the cells themselves. We compare these values with the wave amplitudes produced in geomagnetic and atmospheric phenomena, and found that micropulsations, whistlers and lightning are capable of produce the same or larger values.     

Steady-state analysis and design of a switched-capacitor DC-DCconverter

A representative switched-capacitor DC-DC converter topology is presented, circuit operation is explained, and control strategies are identified. State-space averaging is used to analyze steady-state performance and to develop control criteria and design equations. The analytical results are verified by SPICE simulation     

The Freja ultraviolet imager

Auroral images acquired by satellite instrumentation have proven to be a crucial component of the scientific equiry into the physical processes of the Earth's magnetosphere. TheFreja mission provided an opportunity to extend these measurements into the temporal and spatial regime commonly associated with ground-based optical imagers. Employing the basic procedure used successfully in theViking program allowed image repetition rates of 6 s to be achieved with simultaneous exposure of all pixels within the field-of-view. Typical exposure times of 0.3 s required development of an improved image intensifier system and operational requirements resulted in image formats covering approximately one-third of a spin. Simultaneously exposing two broad-band UV cameras, the instrument generates in its normal operational mode 264.6 kbytes per image pair. Results from initial operations confirm the design approach and suggest such imagers can be routinely included on challenging low cost missions such asFreja.     

Implementation of hand geometry: an analysis of user perspectives and system performance

This discusses the implementation issues of installing a commercially available hand geometry system in the current infrastructure of Purdue University's Recreational Sports Center. In addition to a performance analysis of the system, a pre- and post-data collection survey was distributed to the 129 test subjects gathering information on perceptions of biometrics, in particular hand geometry, as well as participants' thoughts and feelings during their interaction with the hand geometry device. The results of the survey suggest that participants were accepting of hand geometry. Additionally, analyses of the participants' survey responses revealed that 93% liked using hand geometry, 98% thought it was easy to use, and 87% preferred it to the existing card-based system, while nobody thought the device invaded their personal privacy. System performance achieved a 3-try match rate of 99.02% (FRR 0.98%) when "gaming"/potential impostor attempts were removed from analysis. The failure to enroll rate was zero. Statistical analyses exposed a significant difference in the scores of attempts made by users with prior hand geometry usage, and subjects that could not straighten out their hand on the device. However, there were no statistical difference in the effects of rings/no rings, improper hand placements/proper hand placements, or gender on hand geometry score.     

Rationale for the development of the UK defence standards forsafety-critical computer software

Changes in the procurement environment and developments in technology that will require the adoption of new development certification procedures within the next few years are examined. Characteristics of safety-critical computer systems and the safety problems posed by digital computers are described. The way in which the changes have influenced the preparation of the new draft defence standards offered for public debate in the UK prior to their formal adoption by the Ministry of Defence is discussed. Principle features of the future safety-critical systems policy are outlined. The use of Ada for safety-critical software is considered     

A SAR processor based on two-dimensional FFT codes

A synthetic aperture radar (SAR) processor approach based on two-dimensional fast Fourier transform (FFT) codes coupled with an asymptotic evaluation of the unit response function is presented. For the latter, no approximation is made to the distance function, so that the full range of geometric aberrations is analytically considered, enabling an effective reference filter to be designed. The two-dimensional FFTs were designed as to run on computers of very limited memory: the required FFT is computed by means of FFTs of lower order. Two FFT codes were considered: one is faster and allows full or reduced (quick look or multilook) resolution performance to be obtained easily; the second is slower but allows the use of a space-varying filter and/or investigations on limited portions (zoom) of the image. Both codes are suited to parallel processing, e.g. by a transputer net. A full discussion on computer memory and time requirements is presented as well as first examples of image processing results     

Family of constrained signal detectors for hyperspectral imagery

Generalized likelihood ratio tests (GLRTs) are derived for the problem of detecting targets in hyperspectral images. These detectors are derived under the assumptions that the signals from the materials in the image mix linearly and that the noise in the system is Gaussian. It is also assumed that the abundances of the signals from the various materials in a pixel must sum to one. This constraint models the fact that the material abundances in a pixel are just the fraction of the pixel that they occupy. Under these assumptions, detectors are derived which outperform the detectors derived without the sum-to-one constraint.     

Use of combined light flash and plasma measurements to study hypervelocity impact processes

We present new measurements concerning generation of light flash during hypervelocity impacts. We use iron particles (10⁻¹³ to 10⁻¹⁷ kg) with velocities over the range 1 to 42 km/s impacting semi-infinite targets (aluminium and molybdenum). The main results of previous work in the field are found to be reproduced with some slight deviations. For iron projectiles with given mass and velocity the energy of the flash (normalized to mass) is proportional to velocity to the power of 3.5 for aluminium targets and 3.9 for molybdenum targets. The duration of the flash is of order 1 microsecond. Simultaneous measurements of the generation of impact plasma do not change this. The onset of plasma generation of the bulk target material does not affect the total light flash energy. We discuss the duration of the flash compared to a simple calculation of temperature in the target and plasma vs time.