Superlight rotating reflectors in space

There is a general possibility of creation in space of large controlled mirror reflectors for solar and electromagnetic radiation with specific mass order of 1 g m^?2 or less. Such reflectors may be used in space energetics for concentration of solar energy for its further conversion into microwave beam and transmission to the Earth. They can also be used to illuminate the Earth surface in a dark period with reflected sunlight, to control the weather, for research work and some other purposes. Such reflector is a good solar sail. The control of its orientation and position in space is performed using solar energy and light pressure without spending fuel delivered from the Earth. Its form is maintained by centrifugal forces and light pressure. The film strength permits concentrators with radii of several kilometres and nearly flat reflectors for lighting applications with radii of hundreds of metres. Large series of identical reflectors can be built in space using superthin film tape at assembly station. For a year more than a hundred reflectors with a diameter of 600 m can be assembled at such a station. The assembly station can be placed at the height of 1000 km. The reflectors transfer to synchronous or other orbit is performed using their sail-likeness. For realization of such reflectors one should solve a very difficult problem of superthin film mass production as well as assembly technology problems. Careful study and experimental checks of their lifetime should be also made.     

The German space processing programme TEXUS with sounding rockets

This paper reports on the objectives of the German space processing programme with sounding rockets and the scientific results obtained thus far.     

Coronal mass ejection detection using wavelets,curvelets and ridgelets: Applications for space weather monitoring

Coronal mass ejections (CMEs) are large-scale eruptions of plasma and magnetic field that can produce adverse space weather at Earth and other locations in the Heliosphere. Due to the intrinsic multiscale nature of features in coronagraph images, wavelet and multiscale image processing techniques are well suited to enhancing the visibility of CMEs and suppressing noise. However, wavelets are better suited to identifying point-like features, such as noise or background stars, than to enhancing the visibility of the curved form of a typical CME front. Higher order multiscale techniques, such as ridgelets and curvelets, were therefore explored to characterise the morphology (width, curvature) and kinematics (position, velocity, acceleration) of CMEs. Curvelets in particular were found to be well suited to characterising CME properties in a self-consistent manner. Curvelets are thus likely to be of benefit to autonomous monitoring of CME properties for space weather applications.     

What Determines the Composition of SEPs in Gradual Events?

Gradual solar energetic particle (SEP) events are evidently accelerated by coronal/interplanetary shocks driven by coronal mass ejections. This talk addresses the different factors which determine the composition of the accelerated ions. The first factor is the set of available seed populations including the solar wind core and suprathermal tail, remnant impulsive events from preceding solar flares, and remnant gradual events. The second factor is the fractionation of the seed ions by the injection process, that is, what fraction of the ions are extracted by the shock to participate in diffusive shock acceleration. Injection is a controversial topic since it depends on the detailed electromagnetic structure of the shock transition and the transport of ions in these structured fields, both of which are not well understood or determined theoretically. The third factor is fractionation during the acceleration process, due to the dependence of ion transport in the turbulent electromagnetic fields adjacent to the shock on the mass/charge ratio. Of crucial importance in the last two factors is the magnetic obliquity of the shock. The form of the proton-excited hydromagnetic wave spectrum is also important. Finally, more subtle effects on ion composition arise from the superposition of ion contributions over the time history of the shock along the observer’s magnetic flux tube, and the sequence of flux tubes sampled by the observer.     

SIGMA observations of hard X-ray and soft gamma-ray emission from X-ray binaries

After more than two years of operation, the imaging γ-ray SIGMA telescope has accumulated several days of observation toward well known X-ray binaries. Four bright sources falling in this category have been detected so far: The pulsar GX 1+4 near the center of our galaxy, the stellar wind accreting system 4U 1700-377, and the black hole candidates Cygnus X-1 and GX 339-4. Moreover, SIGMA have observed three transients sources, which turned out to be also hard X-ray sources : The burster KS 1731-260, Tra X-1, and the Musca Nova. The properties of these systems in the SIGMA domain will be reviewed and a spectral distinction between black holes and neutron stars will be sketched.     

Non-linear resonant excitation of whistler mode waves in the Earth's ionosphere

We examine the resonant non-linear interaction in the Earth's ionosphere of two powerful high frequency radio beams with frequencies f ₁ and f ₂ (both larger than the plasma frequency at F2_max) and wave numbers k ₁ and k ₂ such that a whistler mode wave can be excited with a frequency f ₃ = f ₁ — f ₂ and a wave number k ₃ = k ₁ – k ₂. The feasibility of an effective ground based installation, sited at low latitudes, is discussed and the field strength of the wave emerging from a 10 km wide ionospheric region illuminated by the beams is evaluated for a range of transmitted frequencies, beam orientations and plasma frequencies in the interaction region. It is suggested that the longitude dependence of the enhancement of VLF noise bands detected by the Ariel 3 satellite may be due to a non-linear interaction of this type between any two or more medium wavelength signals from areas where there is a high concentration of commercial broadcasting stations, such as the NE region of the U.S.A.     

Transformation of the Spectrum of a Signal in Communication between Relativistically Moving Inertial Frames

Future space exploration may involve communications between spacecraft moving at relativistic velocities. One of the significant problems associated with such communication is spectral distortion of signals which are propagated between relativistic frames. This distortion is generated by both changing propagation distances and purely relativistic electromagnetic field transformations. In this paper a linear integral transformation is formulated for relating the Fourier spectra of the source antenna excitation current and the resulting incident electric field at the receiving antenna. The kernel of the transformation is evaluated for the case of a steerable source antenna tracking on the advanced receiver position. The transformation is then applied to the case of an ideal thin-wire half-wave dipole source antenna excited by a narrowband, double-sideband modulated current. The specific distortions of spectral spreading and translation are then related to increased bandwidth and upper cutoff frequency requirements of receiving systems in relativistic applications.     

Dynamics of a Solenoidal-Torqued Gyro-Stabilized Seeker Assembly for Guidance and Tracking

Several low-cost gyro-stabilized, bang-bang seeker assemblies for missile guidance and tracking applications have used similar physical structures. A magnetic dipole is an integral part of the gyro rotor assembly. The nominal spin axis of the gyro is colinear with the axis of a cylinder about which is wound a helix of wire. By properly modulating the current that is passed through that helix, the precession torque acting upon the gyroscope is controlled. One rather generalized model of such a seeker assembly is modeled, the equations of motion are derived, and the dominant error sources are identified and parametrically evaluated. Because this is such a commonly encountered structure, yet no such analysis has been published, to the author's knowledge, it is hoped that this is a useful contribution to the literature.     

Dynamics of an Eddy-Current-Torqued Gyro-Stabilized Assembly

Prominent among the commonly encountered gyro-stabilized assemblies used in guidance and tracking are those which are eddy-current torqued. Although eddy-current-torquecd lead- computing gunsights, which use spinning mirrors, have been well known for thirty years, it has been difficult to find an analysis of the torques developed by the precession mechanism. In this paper a model configuration of the torquer is presented. The total gyro dynamics are then determined by including these torque terms in the model presented in the preceding paper.