Connection between the discrete auroral structures drifting equatorward during the substorm expansion phase and the energetic particle injections at the geostationary orbit

The formation of an auroral bulge with a bright dynamical arc at its polar boundary is one of the main manifestations of the magnetospheric substorm expansion phase at the ionospheric level. At the same time, the region of discrete aurora broadens not only polewards but equatorwards as well. The discrete forms of auroras moving equatorwards form a dynamical equatorial boundary of the auroral bulge shifting together with them. The paper presents a spatial-time comparison of the drifting discrete auroras to the injection of energetic particles at the geostationary orbit. It is shown that bursts in the fluxes of energetic particles at the LANL geostationary satellites located in the same sector of MLT correspond to the majority of drifting discrete auroral structures observed by the all-sky camera. In the cases when the bursts in the fluxes are absent, the minimum latitude reached by the auroral structures at the equatorward drift is higher than the ionospheric projection of the geostationary orbit. A possible relation of the drifting discrete auroras to the plasma stream jets in the plasma sheet is discussed.     

Angle estimation for two unresolved targets with monopulse radar

Most present-day radar systems use monopulse techniques to extract angular measurements of sunbeam accuracy. The familiar "monopulse ratio" is a very effective means to derive the angle of a single target within a radar beam. For the simultaneous estimation of the angles of two closely-spaced targets, a modification on the monopulse ratio was derived in (Blair and Pearce, 2001), while (Sinha et al., 2002) presented a maximum likelihood (ML) technique via numerical search. In this paper it is shown that the ML solution can in fact be found explicitly, and the numerical search of ((Sinha et al., 2002) is unnecessary. However, the ML solution requires the signal to noise ratio (SNR) for each target to be known, and hence we generalize it so it requires only the relative SNR. Several versions of expectation maximization (EM) joint angle estimators are also derived, these differing in the degree to which prior information on SNR and on beam pattern are assumed. The performances of the different direction-of-arrival (DOA) estimators for unresolved targets are studied via Monte Carlo, and it is found that most have similar performance: this is remarkable since the use of prior information (SNR, relative SNR, beam pattern) varies widely between them. There is, however, considerable performance variability as a function of the two targets' off-boresight angles. A simple combined technique that fuses the results from different approaches is thus proposed, and it performs well uniformly.     

Performance limits of sensor-scheduling strategies in electronic support

The case is considered in which a frequency-agile receiver (FAR) for electronic support (ES) attempts to intercept radar emissions over a wide search bandwidth. It was recently shown [1,2] that a random strategy exists in which the expected intercept time can be made arbitrarily close to linear as a function of the scan period of the radar. Can a deterministic strategy be devised in which a similar linear relationship exists for the maximum intercept time? By applying the celebrated arithmetic results of van der Waerden [3] and Szemeredi [4], we show that no such strategy is possible.     

Simple adaptive control for aircraft control surface failures

This work extends the so-called simple adaptive control approach to direct model reference adaptive control of multi-input multi-output systems to include loss of control effectiveness failures. It is proven that all signals are bounded for loss of control effectiveness failures during a bounded input disturbance. A state space approach is introduced for computing the feedforward compensator that is required by the stability result. The adaptive algorithm is applied to a three input model of the linearized lateral dynamics of the F/A-18 aircraft. Simulation results are obtained with single, double, and triple control effectiveness failures of 88% during the occurrence of a lateral gust. These results show that the adaptive controller exhibits improved model following as compared with a fixed gain eigenstructure assignment controller.     

Utilization of white potatoes in CELSS.

Potatoes (Solanum tuberosum) have a strong potential as a useful crop species in a functioning CELSS. The cultivar Denali has produced 37.5 g m-2 d-1 when grown for 132 days with the first 40 days under a 12-h photoperiod and a light:dark temperature cycle of 20 degrees C:16 degrees C, and then 92 days under continuous irradiance and a temperature of 16 degrees C. Irradiance was at 725 micromoles m-2 s-1 PPF and carbon dioxide at 1000 micromoles mol-1. The dried tubers had 82% carbohydrates, 9% protein and 0.6% fat. Other studies have shown that carbon dioxide supplementation (1000 micromoles mol-1) is of significant benefit under 12-h irradiance but less benefit under 24 h irradiance. Irradiance cycles of 60 minutes light and 30 minutes dark caused a reduction of more than 50% in tuber weight compared to cycles of 16 h light and 8 h dark. A diurnal temperature change of 22 degrees C for the 12-h light period to 14 degrees C during the 12-h dark period gave increased yields of 30% and 10% for two separate cultivars, compared with plants grown under a constant 18 degrees C temperature. Cultivar screening under continuous irradiance and elevated temperatures (28 degrees C) for 8 weeks of growth indicated that the cvs Haig, Denali, Atlantic, Desiree and Rutt had the best potential for tolerance to these conditions. Harvesting of tubers from plants at weekly intervals, beginning at 8 weeks after planting, did not increase yield over a single final harvest. Spacing of plants on 0.055 centers produced greater yield per m2 than spacing at 0.11 or 0.22 m2. Plants maintained 0.33 meters apart (0.111 m2 per plant) in beds produced the same yields when separated by dividers in the root matrix as when no separation was made.     

The evolution of mirror type magnetic fluctuations in the magnetosheath based on multipoint observations

Two orbits were selected in January–February 2006 when the separation between the Cluster spacecraft was large and mirror type magnetic field fluctuations were observed by all spacecraft in different regions of the terrestrial magnetosheath. Minimum variance analysis was applied to find the mirror type fluctuations, and the amplitude of the fluctuations was determined individually. Mirror mode structures are moving along the streamlines frozen in the plasma. A model was developed for the calculation of plasma flowtime from the bow shock to the observation point. The growth rate of the field strength perturbations was estimated by comparing the amplitudes of fluctuations observed simultaneously at distant locations (∼10,000 km) based on the assumption that δB ∼ exp(γt). The obtained growth rate values were about an order of magnitude smaller than those provided by linear models and they decreased in the inner regions of the magnetosheath, indicating some saturation in the growth of the waves when proceeding towards the magnetopause. The results of these two case studies suggest that mirror type fluctuations originate from the compression region downstream of the quasi-perpendicular bow shock, and the growth of the fluctuations cannot be described by linear approximations.     

Space science education in Egypt and the 2006 solar eclipse

The space science research has been started in Egypt since 1910 by measuring the solar constant as indication of solar radiation at Helwan Observatory. The solar sunspot studies and its influence on the Nile flooding was erected and operated at Helwan as a first solar station in Egypt during 1957. Zeiss-Coude’ refractor was installed in 1964. Astronomy and space science educations started in Egypt at the university level since 1936 at Department of Astronomy and Meteorology of Cairo University. Undergraduate and graduate education in Egypt will be discussed in this work.     

Subcritical and supercritical water oxidation of CELSS model wastes.

Controlled-Ecological-Life-Support-System (CELSS) model wastes were wet-oxidized at temperatures from 250 to 500 degrees C, i.e., below and above the critical point of water (374 degrees C and 218 kg/cm2 or 21.4 MPa). A solution of ammonium hydroxide and acetic acid and a slurry of human urine, feces, and wipes were used as model wastes. Almost all of the organic matter in the model wastes was oxidized in the temperature range from 400 to 500 degrees C, i.e., above the critical conditions for water. In contrast, only a small portion of the organic matter was oxidized at subcritical conditions. Although the extent of nitrogen oxidation to nitrous oxide (N2O) and/or nitrogen gas (N2) increased with reaction temperature, most of the nitrogen was retained in solution as ammonia near 400 degrees C. This important finding suggests that most of the nitrogen in the waste feed can be retained in solution as ammonia during oxidation at low supercritical temperatures and be subsequently used as a nitrogen source for plants in a CELSS while at the same time organic matter is almost completely oxidized to carbon dioxide and water. It was also found in this study the Hastelloy C-276 alloy reactor corroded during waste oxidation. The rate of corrosion was lower above than below the critical temperature for water.     

Testing the Stability of the Fine Structure Constant in the Laboratory

In this review we discuss the progress of the past decade in testing for a possible temporal variation of the fine structure constant α. Advances in atomic sample preparation, laser spectroscopy and optical frequency measurements led to rapid reduction of measurement uncertainties. Eventually laboratory tests became the most sensitive tool to detect a possible variation of α at the present epoch. We explain the methods and technologies that helped to make this possible.     

Integrated Planning and Execution for Autonomous Spacecraft

An autonomous spacecraft must balance long-term and short-term considerations. It must perform purposeful activities that ensure long-term science and engineering goals are achieved and ensure that it maintains positive resource margins. This requires planning in advance to avoid a series of shortsighted decisions that can lead to failure. However, it must also respond in a timely fashion to a somewhat dynamic and unpredictable environment. Thus, in terms of high-level, goal-oriented activity, spacecraft plans must often be modified due to fortuitous events such as early completion of observations and setbacks such as failure to acquire a guidestar for a science observation. This describes an integrated planning and execution architecture that supports continuous modification and updating of a current working plan in light of a changing operating context.