ARTEMIS Mission Design

The ARTEMIS mission takes two of the five THEMIS spacecraft beyond their prime mission objectives and reuses them to study the Moon and the lunar space environment. Although the spacecraft and fuel resources were tailored to space observations from Earth orbit, sufficient fuel margins, spacecraft capability, and operational flexibility were present that with a circuitous, ballistic, constrained-thrust trajectory, new scientific information could be gleaned from the instruments near the Moon and in lunar orbit. We discuss the challenges of ARTEMIS trajectory design and describe its current implementation to address both heliophysics and planetary science objectives. In particular, we explain the challenges imposed by the constraints of the orbiting hardware and describe the trajectory solutions found in prolonged ballistic flight paths that include multiple lunar approaches, lunar flybys, low-energy trajectory segments, lunar Lissajous orbits, and low-lunar-periapse orbits. We conclude with a discussion of the risks that we took to enable the development and implementation of ARTEMIS.     

Command Link Encoder for Gemini Rendezvous

The first application of a magnetic encoder in a space-to-space command link was proven successful in the Gemini rendezvous missions. The functional aspects of the command link and the mechanization of the encoder are described.     

The RadioAstron project: Measurements and analysis of basic parameters of space telescope in flight in 2011–2013

The results of a large number of the antenna radiometric measurements at bands of 92, 18, 6.2, 1.35, and 1.7-1.2 cm are presented by the data of the standard telemetry system of the Spektr-R spacecraft. Both special sessions of calibration object observations in the mode of a single space radio telescope (SRT) operation and numerous observations of researched sources in the mode of the ground-space interferometer were used. The obtained results agree with the first results of Kardashev et al. (2013), i.e., within 10–15% at bands of 92, 18, and 6.2 cm and 20–25% at the band of 1.35 cm. In the main, the measurements for the eight subbands at wavelengths of 1.7-1.2 cm indicate a monotonic increase in the spectral system equivalent flux density (SEFD) of noise radiation with a frequency consistent with the calculated estimates for the discussed model. The sensitivity of the ground-space interferometer for the five subbands at wavelengths from 1.35 to 1.7 cm can be higher by a factor of 1.5, and for the three subbands from 1.35 to 1.2 cm lower by a factor of 1.5 than at the band of 1.35 cm. The SRT contribution to the interferometer sensitivity proportional to the square root of SEFD is close to the design one at the bands of 92 and 18 cm and decreases the design sensitivity approximately by a factor of 1.5 and 2 at the bands of 6.2 and 1.35 cm, respectively. These differences of implemented values from the design ones were not significantly affected the scientific program implementation.     

Do we understand the inner magnetotail dynamics during substorms?

Substorm evolution of the near-Earth (|X|<15 R_E) plasma sheet has been emphasized recently because the inner tail is thought to link closely to the substorm auroral activity in the ionosphere during the early stage of substorms. In this paper, we discuss how the inner tail substorm phenomena during the late substorm growth phase and early expansion phase are accounted for by the two prevailing substorm models, namely, the near-Earth neutral line model and the current disruption model. We find that the late growth phase features are more satisfactorily accounted for by the current disruption model than by the near-Earth neutral line model. In addition, detailed observations on current disruption show evidence inconsistent with the proposed idea of dipolarization being due to plasma flow braking from reconnection in the mid-tail region, which poses a difficulty to the near-Earth neutral line model as well.     

Viscoelastic behaviour of pumpkin balloons

The lobes of the NASA ULDB pumpkin-shaped super-pressure balloons are made of a thin polymeric film that shows considerable time-dependent behaviour. A nonlinear viscoelastic model based on experimental measurements has been recently established for this film. This paper presents a simulation of the viscoelastic behaviour of ULDB balloons with the finite element software ABAQUS. First, the standard viscoelastic modelling capabilities available in ABAQUS are examined, but are found of limited accuracy even for the case of simple uniaxial creep tests on ULDB films. Then, a nonlinear viscoelastic constitutive model is implemented by means of a user-defined subroutine. This approach is verified by means of biaxial creep experiments on pressurized cylinders and is found to be accurate provided that the film anisotropy is also included in the model. A preliminary set of predictions for a single lobe of a ULDB is presented at the end of the paper. It indicates that time-dependent effects in a balloon structure can lead to significant stress redistribution and large increases in the transverse strains in the lobes.     

Responses of ionospheric foF2 to geomagnetic activities in Hainan

Responses of low-latitude ionospheric critical frequency of F2 layer to geomagnetic activities in different seasons and under different levels of solar activity are investigated by analyzing the ionospheric foF2 data from DPS-4 Digisonde in Hainan Observatory during 2002–2005. The results are as follows: (1) the response of foF2 to geomagnetic activity in Hainan shows obvious diurnal variation except for the summer in low solar activity period. Generally, geomagnetic activity will cause foF2 to increase at daytime and decrease at nighttime. The intensity of response of foF2 is stronger at nighttime than that at daytime; (2) seasonal dependence of the response of foF2 to geomagnetic activity is very obvious. The negative ionospheric storm effect is the strongest in summer and the positive ionospheric storm effect is the strongest in winter; (3) the solar cycle has important effect on the response of foF2 to geomagnetic activity in Hainan. In high solar activity period, the diurnal variation of the response of foF2 is very pronounced in each season, and the strong ionospheric response can last several days. In low solar activity period, ionospheric response has very pronounced diurnal variation in winter only; (4) the local time of geomagnetic activities occurring also has important effect on the responses of foF2 in Hainan. Generally, geomagnetic activities occurred at nighttime can cause stronger and longer responses of foF2 in Hainan.     

Simulation experiments of the cosmic ray isotope telescope on ETS VI

A computer simulation was carried out to evaluate the basic characteristics of a Δ E×E cosmic ray telescope consisting of 23 solid state detectors including 3 position sensitive detectors with large effective area. Based on the simulation, the geometric factor of the telescope is deduced to be as large as 22.5 cm²sr, almost independent of charge and energy concerned. The energy ranges to be covered by the telescope are, for example, 18–98 MeV/n for Li and 56–339 MeV/n for Fe. By analyzing simulated data, the mass resolution for iron in the overall energy range covered by the telescope is estimated as about 0.22 amu in standard deviation. The expected counting rates and mass-histograms are simulated for Galactic cosmic rays and solar energetic particles.     

The Flight 2000 avionics suite: paving the way to free flight

The FAA's Flight 2000 project is an innovative initiative to implement and validate selected operational improvements leading to Free Flight. It integrates new avionics, new ground systems, new procedures, avionics certification, and operational approval. Approximately 2000 aircraft operating in Alaska, Hawaii, and Oceanic airspace will be equipped with new capabilities enabling benefits such as improved situational awareness, increased flexibility, and efficiency gains. By developing and fielding these operational improvements, the actual benefits of new procedures and capabilities will be validated and risks associated with national implementation will be reduced