深空探测器模块化结构动力学研究

随着深空探测器技术的不断发展,深空探测器设计逐渐转向模块化和标准化。串联结构是模块化深空探测器常见并较为合理的结构形式,而如何将运载对探测器整体模态频率的指标要求合理转化为对探测器各个模块结构的设计要求是当前工作中的一项挑战。根据子结构综合模态法并基于固定边界法和悬臂梁理论,提出了探测器子结构模块动力学模态指标的分配方法。采用3种子结构模块极限处理方法,用全解析方式推导了子结构模块的基频表达式,并分析了子结构模块的动力学特性与探测器整体结构动力学特性之间的关系。提出的子结构模块的动力学指标分解方法操作简单,精度较高,可为串联式模块化深空探测器的设计提供关键性的指导。     

针对多个地球静止轨道目标的巡游轨道设计

运行在螺旋巡游轨道上的航天器无需施加控制力就可以长期巡游在指定轨道附近,利用该特点,克服地基目标监视系统的不足,可提高空间目标监视能力.在现有的设计基础之上,改进对地球静止轨道多个目标螺旋巡游轨道的初始轨道设计;通过施加控制提出两种可以对地球静止轨道上多个目标进行绕飞观测的螺旋巡游轨道设计;通过仿真验证,对比二者各自的优势.     

Computational aerodynamic analysis on perimeter reinforced （PR）-compliant wing

Abstract Implementing the morphing technique on a micro air vehicle （MAV） wing is a very chal- lenging task, due to the MAWs wing size limitation and the complex morphing mechanism. As a result, understanding aerodynamic characteristics and flow configurations, subject to wing structure deformation of a morphing wing MAV has remained obstructed. Thus, this paper presents the investigation of structural deformation, aerodynamics performance and flow formation on a pro- posed twist morphing MAV wing design named perimeter reinforced （PR）-compliant wing. The numerical simulation of two-way fluid structure interaction （FSI） investigation consist of a quasi- static aeroelastic structural analysis coupled with 3D incompressible Reynolds-averaged Navier- Stokes and shear-stress-transport （RANS-SST） solver utilized throughout this study. Verification of numerical method on a rigid rectangular wing achieves a good correlation with available exper- imental results. A comparative aeroelastic study between PR-compliant to PR and rigid wing per- formance is organized to elucidate the morphing wing performances. Structural deformation results show that PR-compliant wing is able to alter the wing＇s geometric twist characteristic, which has directly influenced both the overall aerodynamic performance and flow structure behavior. Despite the superior lift performance result, PR-compliant wing also suffers from massive drag penalty, which has consequently affected the wing efficiency in general. Based on vortices investigation, the results reveal the connection between these aerodynamic performances with vortices formation on PR-comoliant wing.     

边界层对可调节进气道性能的影响

给出了马赫数2-6、单位雷诺数（0．8-6．0）×10^7／m时下吹式风洞中可调节三维进气道的试验研究结果。研究了前缘前掠和后掠方案以及进气道人口前边界层的影响。测量了内流道内的压力分布、质量流量和总压恢复系数;确定了进气道启动与马赫数和流动工况的关系。研究结果表明：边界层对流场结构和模型进气道的性能有着决定性影响,相对简单的进气道调节方案可以增大其稳定运行范围。     

大型客机后缘襟翼滑轨整流罩气动外形设计方法

大型客机后缘襟翼机构伸出机翼下表面会带来气动损失,必须设计相应整流罩。整流罩的外形尺寸对气动力影响较大,会直接影响飞机的气动特性。设计整流罩时应该遵循整流罩外形设计要求,使其引起的高速巡航阻力尽可能小。在查阅相关文献、对比研究大量整流罩图片、分析研究计算机辅助设计(CAD)中NURBS曲面曲线描述方法的基础上,建立了一套详细的大型客机后缘襟翼滑轨整流罩外形设计方法,该方法在满足整流罩包裹住机构、减小气动损失等基本要求的同时,缩短了整流罩设计周期。     

民用飞机应急处理分析流程研究

民用飞机在飞行过程中必然会遇到一些难以预料的情况,如何使空中和地面的工作人员能快速有效地处理飞机在飞行过程中出现的突发事件,已成为世界各国航空运输业关注的重点。为了在突发事件发生后能最大限度地保障乘客和飞机的安全,介绍了空乘及地面工作人员在突发事件发生后的应急处理流程。     

民用飞机最小离地速度试飞实施方法研究

对民用飞机最小离地速度( VMU )试飞实施方法进行了研究,主要包含了条款的理解、试验准备、试验分工、模拟器工作准备、试飞技术和数据处理等内容,为民用飞机最小离地速度试飞提供指导。同时作为国内新兴的职业---试飞工程师( FTE),也对其在试飞过程中的分工和职责进行了阐述。     

Alfvn Waves in the Solar Wind

Alfvn waves are found to be ubiquitous in the solar wind.Recent progress in observational studies of the waves is reviewed to formulate a microscopic picture for the Alfvenic fluctuations. The main aspects of the observational properties of these waves,including the wave intervals, propagation,evolution,origin and generation,are presented.Then Alfven wave heating and acceleration of the solar wind plasma are briefly introduced.The relation of the waves to rotational and tangential discontinuities,magnetic decreases,and other relatively large-scale structures such as flux tubes/ropes,magnetic clouds and interplanetary coronal mass ejections in the solar wind is particularly investigated.Finally,some remaining open questions are also indicated due to their fundamental importance of understanding of the physical nature of Alfven waves and the role of the waves in heating and accelerating the solar wind.     

陀螺经纬仪在北向基准检测中的应用研究

利用高端精密仪表——陀螺经纬仪,确定与检测棱镜、转台、地标北向基准准确度。在说明了陀螺经纬仪寻北原理、使用方法的基础上,描述了棱镜、转台、地标等检测方法和技术要求。     

DIRECT NUMERICAL SIMULATIONS OF MULTIPHASE FLOWS

INTRODUCTIONMultiphase and multifluid flows are commonin many natural and technologically importantprocesses. Rain,spray combustion,spray paint-ing,and boiling heat transfer are just a few ex-amples.While it is the overall,integral charac-teristics of such flows that are of most interest,the global behavior is determined to a large de-gree by the evolution of the smallestscales in theflow.The combustion of sprays,for example,depends on the size and the number density ofthe drops.Generally…