喷管进口和喉道几何形状对固体火箭发动机比冲的影响

本文介绍在火箭喷管进口和喉道区域计算完全耦合的燃气——粒子混合物流场的计算机化模型。定常态的燃气流场是作为长时间渐近解计算的,而粒子流场是假定准定常流来计算。对于超音速燃气粒子流场,这一模型则与特征线法结合进行计算。计算表明喷管进口角度、喷管喉道曲率半径比、喉道尺寸以及粒子大小对比冲的影响。文中也介绍了一些发动机试验数据的比较。     

半导体式奌火系统

苏联,以乌里扬诺夫(列宁)命名的列宁格勒电工学院,电介质及半导体教研室 航空发动机的点火系统,大都采用了由磁电机来供电的高压火花放电式电咀。这种点水系统的结构复杂,体积笨重,并且在使用上还存在着严重的缺陷。这些缺陷,首     

在高频负荷下钛合金及耐热合金持久强度的研究

1.引言 新型优质材料的制造及其在工艺上的应用与金属疲劳强度问题的研究,关系极为密切。这一问题对于现代航空发动机构造的发展具有特别重要的意义。因为,这种发动机的零件是在高温和高频振动负荷的情况之下工作的。在喷气发动机中,负荷最大的零件     

用于飞机健康监控的传感器技术不断升级

得益于数据处理和存储技术的进步，从飞机上获取的数据量呈爆发式增长，可对飞机实施预测性维修的机会也越来越多。其中，不断进步的传感器技术是支撑飞机健康监控技术发展的关键因素。     

THE STUDY OF AIRPORTTERRAIN EFFECTS ON AUTOLAND FOR ANY AIRPLANE

<正> The terrain profile at several airports has caused some difficulty with autolands on the DC-10 and MD-80. Some operators have reported that the pilot had to disconnect the flight guidance system during flare and land manually. At present, the autoland guidance system is not uniquely designed to handle the variations of terrain. Since there is no accurate substitute for radio altitude(h_(rad)) the only variable left to improve is radio altitude rate (h_(rad)).     

钝尾物体底部压力计算

 提出了一种简便可靠的计算钝尾物体表面压力分布及底部压力的方法。将钝尾物体绕流流场分为无粘区、边界层区和分离区。无粘区和边界层区分别用位流理论和边界层理论计算。分离区由根据尾流函数等建立的替代模型模拟。利用奇点法解出整个模型的压力分布。计算釆用迭代法进行。对Vanwagenen模型和鲁尔大学模型进行了计算,结果表明该方法是成功的。     

评定运载火箭成本的TRANSCOST模型及其应用

首先介绍评定运载火箭的研制和发射成本的解析模型的结构,着重讨论评定使用成本的新方法,并引入众多参数来修正模型.尔后以“阿里安”4后继型为例,讨论用于未来系统分析和成本比较的模型,分析了采用10种不同方案的可贮低温燃料两级火箭的研制和发射成本.欧洲未来运载火箭系统的关键是要最佳解决有限的研制费用与期望的最低发射成本之间的矛盾.多次使用系统能使发射成本大为降低,但研制费用较大.基于实际参数的成本解析模型能为选择运载火箭方案提供重要的信息.     

Magnetic Field Fluctuations in the Solar Wind, Foreshock and Magnetosheath： Cluster Data Analysis

46 magnetosheath crossing events from the two years (2001.2-2003.1) of Cluster magnetic field measurements are identified and used to investigate the characters of the magnetic field fluctuations in the regions of undisturbed solar wind, foreshock, magnetosheath. The preliminary results indicate the properties of the plasma turbulence in the magnetosheath are strongly controlled by IMF orientation with respect to the bow shock normal. The amplitude of the magnetic field magnitude and direction variations behind quasi-parallel bow shock are larger than those behind quasi-perpendicular bow shock. Almost purely compressional waves are found in quasi-perpendicular magnetosheath.     

Structure of the Program of Short-term Prediction of Powerful Solar Flares

Input data of the system are two-dimensional images and one-dimensional distributions of total and polarized solar emission at 5.2 cm wavelength obtained with SSRT. Together with photoheliograms, magnetograms, Hα-filtergrams and characteristics of active regions received from other sources, they form the initial database. The first stage includes superimposing the images, identifying microwave sources with active regions, assigning NOAA numbers to the sources, and determining for each active region the heliolatitude, extent, and inclination angle of the group's axis to the equator. These data are used to calculate the boundaries of longitude zones for each active region. A next stage involves determining the brightness temperatures of microwave sources less than the polarization distribution, the degree of polarization, and microwave emission flux, as well as calculating the parameters of microwave sources. Each parameter is assigned its own value of the weight factor, and the sum of values is used to draw the conclusion about the flare occurrence probability in each active region and on the Sun in general.      

密集型空气雾化流场破碎特征数学模型研究

低速液体射流在高速湍流气体作用下的气液同轴射流雾化流场是瞬态密集型喷雾场,高速湍流中影响和控制雾化的因素很多。针对空气雾化流场液核分布与特征进行分析,开发了模拟液核的随机浸入体模型,结合大涡模拟方法对同轴射流空气雾化喷嘴下游流场进行数值模拟。模拟结果与实验结果对比表明：随机浸入体模型可快速捕捉液核的长度和位置信息。当气液动量比M为3~10000时,能够较准确地预测液核长度,当M>10时,其预测结果远优于唯象模型;该模型能够捕捉回流区、大尺度涡等流场结构。同时,可以准确地预测喷嘴附近的液滴粒径,特别是在气流速度较大（>60m/s）时,液滴平均直径预测误差<10%。