Improved Wavelet-based Spatial Filter of Damage Imaging Method on Composite Structures

Piezoelectric sensor array-based spatial filter technology is a new promising method presented in research area of structural health monitoring (SHM) in the recent years. To apply this method to composite structures and give the actual position of dam-age, this paper proposes a spatial filter-based damage imaging method improved by complex Shannon wavelet transform. The basic principle of spatial filter is analyzed first. Then, this paper proposes a method of using complex Shannon wavelet transform to construct analytic signals of time domain signals of PZT sensors array. The analytic signals are synthesized depending on the principle of the spatial filter to give a damage imaging in the form of angle-time. A method of converting the damage imaging to the form of angle-distance is discussed. Finally, an aircraft composite oil tank is adopted to validate the damage imaging method. The validating results show that this method can recognize angle and distance of damage successfully.     

基于原位拉伸测定GTN损伤模型参数的5052铝合金成形极限应力图研究(英文)

传统成形极限图(FLD)由第一主应变与第二主应变的比值构成。但FLD依赖于成形历史和应变路径。因此,本文采用成形极限应力图(FLSD)来预测铝合金5052-O1(AA5052-O1)的成形极限。将修订的Gurson-Tvergaard-Needleman(GTN)塑性势模型用来模拟Nakazima凸模胀形实验。采用带扫描电镜(SEM)的原位拉伸试验观察记录损伤演化过程以确定GTN模型中的材料参数。通过计算AA5052-O1三个损伤阶段的孔洞分数获得GTN模型参数。根据实验结果,原生孔洞体积分数、最大形核孔洞体积分数、临界孔洞体积分数,最终断裂孔洞体积分数分别为0.002918,0.0249,0.030103,0.04854。在断裂前最后一个载荷步获得的应力应变值用来绘制AA5052-O1的FLSD和FLD。与Nakazima凸模胀形试验和单轴拉伸试验结果相比较,预测结果与试验结果较为吻合。由原位拉伸试验确定的模型参数可用于研究韧性金属的成形极限。     

星载双频GPS相位历元差缩减动力学定轨(英文)

研究了星载双频GPS相位历元差缩减动力学定轨方法,该方法既克服了相位历元差运动学方法在观测几何较差或数据不足情况下无法应用的缺点,又避免了相位非差动力学方法易受周跳和模糊度影响的缺点。历元差方法对相位周跳的影响不敏感,因此能够降低相位数据预处理中周跳探测的难度。在模型求解过程中,解决了高维矩阵的计算问题,将长弧段观测数据分成若干短弧段,相邻两个短弧段的连接处不做差分,仅在每个短弧段内部进行历元间差分处理。通过对GRACE卫星进行试算,并与GFZ事后科学轨道进行比较,结果表明相位历元差缩减动力学定轨精度在径向、沿迹方向和轨道法向分别可达1.92cm、3.83cm和3.80cm,三维位置精度可达5.76cm,该方法与相位非差缩减动力学定轨精度相当。     

Up-to-date observations of space energetic particles made by the Chinese satellite Fengyun-1 (B).

This paper presents the observational results of space energetic particles obtained by the Cosmic Ray Composition Monitor (CRCM) onboard the Chinese satellite, Fengyun-1(B). These results, including those of a few solar proton events, the geomagnetically trapped particles and the anomalous cosmic ray components, were obtained from 3 September 1990 to 15 February 1991. The observed elements include H, He, C, N, O and Fe of energies from 4-23 MeV/u. It was found that the proton fluxes of the inner Radiation Belt (IRB) increased obviously during the period of solar proton event (SPE). A few kinds of heavy ions (Z > or = 6) were also detected in the IRB. As to the anomalous cosmic ray component (ACRC), in addition to C, N and O, anomalous iron particles were also recorded.     

InvesInvestigation of the Effects of Airfoil-probes on the Aerodynamic Performance of an Axial Compressor

In order to investigate the effects of the airfoil-probes on the aerodynamic performance of an axial compressor,a numerical simulation of 3D flow field is performed in a 1.5-stage axial compressor with airfoil-probes installed at the stator leading-edge(LE).The airfoil-probes have a negative influence on the compressor aerodynamic performance at all operating points.A streamwise vortex is induced by the airfoil-probe along both sides of the blade.At the mid-operating point,the vortex is notable along the pressure side and is relatively small along the suction side(SS).At the near-stall point,the vortex is slightly suppressed in the pressure surface(PS),but becomes remarkable in the suction side.A small local-separation is induced by the interactions between the vortex and the end-wall boundary layer in the corner region near the hub.That the positive pitch angle of the airfoil-probe at 6.5% span is about 15° plays an important role in the vortex evolution near the hub,which causes the fact that the airfoil-probe near the hub has the largest effects among the four airfoil-probes.In order to get a further understanding of the vortex evolution in the stator in the numerical simulation,a flow visualization experiment in a water tunnel is performed.The flow visualization results give a deep insight into the evolution of the vortex induced by the airfoil-probe.     

Cyclic Oxidation Behavior of an EB-PVD CoCrAlY Coating Influenced by Substrate/coating Interdiffusion

To reveal the influence of substrate/coating interdiffusion on the cyclic oxidation property of a metallic coating, cyclic oxidation behavior of an EB-PVD CoCrAlY coating on directionally solidified Ni-based superalloy DZ125 at 1 050 oC is investigated. The 40 μm thick CoCrAlY coating has a cyclic oxidation life of around 160 h, and the oxidation constant is 1.915× 10.7 mg4·cm.8·s.1. However, severe spallation of the oxides containing Co, Cr, Ni, Ta and Ti occurs with longer cyclic oxidation. The degradation in oxidation resistance for the coating is related to the depletion of Al due to the oxide spallation and interdiffusion. Severe interdiffusion between the coating and underlying substrate occurs at 1 050 oC. The composition of the substrate has an important effect on the thermal cycling lifetime of the coating. The influencing mechanism is discussed.     

Effect of Stitching on Plain and Open-hole Strength of CFRP Laminates

 Experimental and analytical investigation is conducted to explore the effects of stitching on plain (without hole) and open-hole compressive and tensile strength of uniweave T300/QY9512 laminates under different environmental conditions (20 篊/dry and wet, 150 篊/dry and wet). Strength performance of stitched composite laminates is also studied using finite element analysis (FEA) model and compared with the experimental results to validate the model. It is found that under similar environmental conditions, the open-hole compressive strength of stitched laminate is decreased and open-hole tensile strength increased as compared to the unstitched laminates. Predicted tensile and compressive strengths are found to be in a good agreement with the test results and the relative error in all cases is less than 15%.     

Three-dimensional analysis of relationship between relative orientation and motion modes

Target motion modes have a close relationship with the relative orientation of missile-totarget in three-dimensional highly maneuvering target interception. From the perspective of relationship between the sensor coordinate system and the target body coordinate system, a basic model of sensor is stated and the definition of relative angular velocity between the two coordinate systems is introduced firstly. Then, the three-dimensional analytic expressions of relative angular velocity for different motion modes are derived and simplified by analyzing the influences of target centroid motion, rotation around centroid and relative motion. Finally, the relationships of the relative angular velocity directions and values with motion modes are discussed. Simulation results validate the rationality of the theoretical analysis. It is demonstrated that there are significant differences of the relative orientation in different motion modes which include luxuriant information about motion modes. The conclusions are significant for the research of motion mode identification,maneuver detection, maneuvering target tracking and interception using target signatures.     

Update Chain-based Approach for Checking Route Oscillation of BGP

This paper presents a novel approach for checking route oscillation of border gateway protocol(BGP) quickly,by which the privacy of routing policies of autonomous system(AS) can be respected.Firstly,route update chain tag(RUCT) is constructed to track the forwarding of update report,and local routing library is made to record the changing history of update report.Then route oscillation can be identified by analyzing correlative state of RUCT and local routing library.The characteristic of this approach is that an arbitrary AS can check route oscillation alone only by sharing its network ID,which greatly respects the pri-vacy of routing policies for each AS.This paper shows that both looping in RUCT and consecutive positive-negative report in local record are sufficient conditions for route oscillation.Comparative experiments demonstrate the availability and efficiency of the proposed approach.     

Influence of Gd2O3 and Yb2O3 Co-doping on Phase Stability,Thermo-physical Properties and Sintering of 8YSZ

The role of multicomponent rare earth oxides in phase stability, thermophysical properties and sintering for ZrO2-based thermal barrier coatings (TBCs) materials is investigated. 8YSZ codoped with 3 mol% Gd2O3 and 3 mol% Yb2O3 (GYb-YSZ) powders are synthesized by solid state reaction for 24 h at various temperatures. As temperature increases, stabilizers are dissolved into zirconia matrix gradually. Synthesized at 1 500 °C, GYb-YSZ is basically composed of cubic phase. GYb-YSZ exhibits excellent phase stability and sinters lower than 8YSZ by nearly three times. The thermal conductivity of GYb-YSZ is much lower than that of 8YSZ, and the thermal expansion coefficient of GYb-YSZ is comparable to that of 8YSZ. The influence of Gd2O3 and Yb2O3 co-doping on phase stability, thermal conductivity and sintering of 8YSZ is discussed.