栅极偏压对纳米金刚石薄膜沉积过程的影响

在HFCVD系统中施加栅极偏压和衬底偏压,采用双偏压成核和栅极偏压生长的方法成功制备了高质量的纳米金刚石薄膜.采用显微Raman高分辨率SEM和AFM等现代理化分析手段分析纳米金刚石膜的微结构,结果表明双偏压显著促进了金刚石的成核密度,平均晶粒尺寸在20 nm以内.试验观察和理论分析表明栅极偏压促进了热丝附近的等离子体浓度,提高了衬底附近的碳氢基团和氢原子浓度,提高了金刚石的成核密度、在保持晶粒的纳米尺寸的同时保持了较高的成膜质量和较低的生长缺陷.     

高速加工HSK工具系统的力学模型

根据HSK工具系统的结构和工作机理建立了HSK工具系统的力学模型,分析了影响工具系统刚度的主要因素和载荷与加工质量之间的关系,揭示出HSK工具系统刚度变化的基本规律,理论分析结果与实验结果吻合.在此基础上,提出评估工具系统的性能不仅要考虑工具系统的静刚度,而且要进一步考虑工具系统的动刚度.最后,给出了HSK工具系统型号的选择原则,并建立了相应的优化操作条件.     

IRI-90及其与中国电离层资料f_0F_2的比较

本文介绍了国际参考电离层IRI-90版中新增的内容,比较了它与IRI-86的主要差别。与我国电离层临频数据的统计分析表明,新版本对我国地区的适用程度有了改进。     

磨粒监测与分析系统在航空发动机状态监控中的应用(英文)

磨损颗粒是研究机器磨损状态时最直接、最重要的信息元 ,通过对滑油中的磨粒进行监测与分析以判断机械设备的磨损状况 ,可以监测并预防机械设备的磨损故障。本文介绍的磨粒监测与分析系统 ( DMAS)具有制谱简单、自动化程度高、能及时准确预报及诊断机器的各种磨损类故障等特点 ,可以有效地保障机器安全可靠地运行。本文详细地阐述了这套系统的基本原理、软硬件组成 ,以及在航空发动机磨损状态监测中的应用     

温度对接触热阻的影响

介绍了一种采用实验的方法研究温度对接触热阻的影响及所得到的结果。当多晶体固体表面相互接触时，随着接触面温度升高，接触热阻呈下降规律。产生这一现象的机理是由于当接触面温度变化时。接触表面的微观形状发生了变化。从而导致了接触热阻的变化。当多晶体固体表面相互接触时，对应同一宏观接触状况其微观接触状况却不尽相同。通过实验获得了接触热阻的变化范围和接触热阻随温度变化的数据带。实验中观察到温度使固体表面产生的变形有些能够恢复，有些则不能．本文提出了能否建立温度与变形、时间三者关系的假设，当固体接触表面温度较高时，还提出了一种研究接触热阻的方法。     

Variable stiffness design of redundantly actuated planar rotational parallel mechanisms

Redundantly actuated planar rotational parallel mechanisms (RAPRPMs) adapt to the requirements of robots under different working conditions by changing the antagonistic internal force to tune their stiffness. The geometrical parameters of the mechanism impact the performances of modulating stiffness. Analytical expressions relating stiffness and geometrical parameters of the mechanism were formulated to obtain the necessary conditions of variable stiffness. A novel method of variable stiffness design was presented to optimize the geometrical parameters of the mechanism. The stiffness variation with the internal force was maximized. The dynamic change of stiffness with the dynamic location of the mechanism was minimized, and the robustness of stiff-ness during the motion of the mechanism was ensured. This new approach to variable stiffness design can enable off-line planning of the internal force to avoid the difficulties of on-line control of the internal force.     

A novel environmental control system based on membrane dehumidification

This paper conducts a simulation study of a novel aircraft environmental control system based on membrane dehumidification(MD-ECS),and compares the system with the up-to-date four-wheel high pressure de-water system(4WHPDW-ECS).Mathematical models for the two systems are established,and a system simulation using a numerical technique is performed to analyze and compare the cooling performance of the two systems.Simulation results show that the cooling capacity of MD-ECS is much higher than that of 4WHPDW-ECS under the same working conditions,indicating that the novel system is theoretically feasible and promising.The effects of the sweep ratio of the membrane dehumidifier on the dehumidification and cooling performance of the system is also investigated.     

激光干涉正弦法小角度测量中有关问题探讨

分析了小角度正弦激光干涉仪的有关特性，叙述了这种方法的测量原理，计算了几种因素对测量准确度的影响，指出提高测量准确度的解决办法。     

Comparison of global morphologies of vertical ion convergence and sporadic E occurrence rate

This study employs the Horizontal Wind model 2014 to calculate the intensity of the Vertical ion convergence (VIC) to examine the role of neutral wind shear in the global distribution of the Es occurrence rate. The global S4 observations from the FORMOSAT-3/COSMIC GPS Occultation Experiment (GOX) are used to derive global information on the Es occurrence. Both the simulation and observation suggest that the Es highly occurs in the mid-latitude regions of the summer hemisphere.     

热压烧结型石油射孔弹药形罩的配方优化

介绍了一种制备石油射孔弹药形罩的新方法，采用粉末冶金热压烧结工艺制备石油射孔弹药形罩，并对药形罩的配方进行优化。试验结果表明采用该工艺制备的石油射孔弹药形罩品质较好。