喷丸强化10Ni3MnCuAl钢的表面性能

对10Ni3MnCuAl钢磨削表面进行不同强度的喷丸强化处理,分析了喷丸强化后10Ni3MnCuAl钢的金相组织及喷丸表层下微观结构的变化,测量了喷丸影响层的显微硬度以及喷丸强化所形成的残余压应力场, 研究了喷丸所造成显微硬度、金相组织和表面残余应力等表面完整变化.结果表明, 喷丸强化可显著改善10Ni3MnCuAl钢表面完整性及其疲劳寿命. 喷丸强度高时将产生过喷效应,导致疲劳寿命的降低,实验测得最佳喷丸强化弧高值为0.40 mm时表面质量最好,喷丸影响层的残余应力深度达450 μm.     

IRI-90及其与中国电离层资料f_0F_2的比较

本文介绍了国际参考电离层IRI-90版中新增的内容,比较了它与IRI-86的主要差别。与我国电离层临频数据的统计分析表明,新版本对我国地区的适用程度有了改进。     

磨粒监测与分析系统在航空发动机状态监控中的应用(英文)

磨损颗粒是研究机器磨损状态时最直接、最重要的信息元 ,通过对滑油中的磨粒进行监测与分析以判断机械设备的磨损状况 ,可以监测并预防机械设备的磨损故障。本文介绍的磨粒监测与分析系统 ( DMAS)具有制谱简单、自动化程度高、能及时准确预报及诊断机器的各种磨损类故障等特点 ,可以有效地保障机器安全可靠地运行。本文详细地阐述了这套系统的基本原理、软硬件组成 ,以及在航空发动机磨损状态监测中的应用     

Variable stiffness design of redundantly actuated planar rotational parallel mechanisms

Redundantly actuated planar rotational parallel mechanisms (RAPRPMs) adapt to the requirements of robots under different working conditions by changing the antagonistic internal force to tune their stiffness. The geometrical parameters of the mechanism impact the performances of modulating stiffness. Analytical expressions relating stiffness and geometrical parameters of the mechanism were formulated to obtain the necessary conditions of variable stiffness. A novel method of variable stiffness design was presented to optimize the geometrical parameters of the mechanism. The stiffness variation with the internal force was maximized. The dynamic change of stiffness with the dynamic location of the mechanism was minimized, and the robustness of stiff-ness during the motion of the mechanism was ensured. This new approach to variable stiffness design can enable off-line planning of the internal force to avoid the difficulties of on-line control of the internal force.     

A novel environmental control system based on membrane dehumidification

This paper conducts a simulation study of a novel aircraft environmental control system based on membrane dehumidification(MD-ECS),and compares the system with the up-to-date four-wheel high pressure de-water system(4WHPDW-ECS).Mathematical models for the two systems are established,and a system simulation using a numerical technique is performed to analyze and compare the cooling performance of the two systems.Simulation results show that the cooling capacity of MD-ECS is much higher than that of 4WHPDW-ECS under the same working conditions,indicating that the novel system is theoretically feasible and promising.The effects of the sweep ratio of the membrane dehumidifier on the dehumidification and cooling performance of the system is also investigated.     

激光干涉正弦法小角度测量中有关问题探讨

分析了小角度正弦激光干涉仪的有关特性，叙述了这种方法的测量原理，计算了几种因素对测量准确度的影响，指出提高测量准确度的解决办法。     

Comparison of global morphologies of vertical ion convergence and sporadic E occurrence rate

This study employs the Horizontal Wind model 2014 to calculate the intensity of the Vertical ion convergence (VIC) to examine the role of neutral wind shear in the global distribution of the Es occurrence rate. The global S4 observations from the FORMOSAT-3/COSMIC GPS Occultation Experiment (GOX) are used to derive global information on the Es occurrence. Both the simulation and observation suggest that the Es highly occurs in the mid-latitude regions of the summer hemisphere.     

热压烧结型石油射孔弹药形罩的配方优化

介绍了一种制备石油射孔弹药形罩的新方法，采用粉末冶金热压烧结工艺制备石油射孔弹药形罩，并对药形罩的配方进行优化。试验结果表明采用该工艺制备的石油射孔弹药形罩品质较好。     

高性能铝基复合材料的颗粒分布及界面结合

采用常规粉末冶金和高能球磨粉末冶金法制备了B4Cp/Al复合材料，研究了B4C颗粒分布与界面结合特点、形成机制以及对材料性能的影响。结果表明，17％（体积分数）B4Cp/6061Al复合材料的屈服和抗拉强度分别为415MPa和470MPa，比常规粉末冶金复合材料分别提高了69％和70％。微观分析表明，高能球磨粉末冶金复合材料中B4C颗粒均匀分布、颗粒与基体之间存在近百纳米厚度的界面层，界面层由呈带状且有序分布的微细铝晶粒和弥散分布的纳米颗粒组成。高能球磨过程中，铝粉末在钢球表面形成冷焊层，B4C不断被挤入而均匀化是实现颗粒均匀分布的主要机制；球磨过程中铝粉末表面氧化层破碎暴露出新鲜铝表面且与镶嵌与铝粉末中的B4C颗粒形成界面结合是获得良好界面结合复合材料的重要条件     

适合航空航天用SiCp/Al复合材料的性能

采用粉末冶金法制备了Φ300 mm的15%(体积分数)SiCp/A l复合材料坯锭,研究了热挤压、锻造后的材料力学性能以及断裂特点。结果表明,该材料的弹性模量在97 GPa、拉伸强度保持在550 MPa的水平下,延伸率仍高达7%左右,旋转弯曲疲劳强度在250~290 MPa范围内,断裂韧性为25 MPa.m1/2,冲击韧性为62.5 kJ/m2。与棒材挤压态相比,T4态复合材料拉伸强度和屈服强度分别提高66.7%和100%,但塑性保持在同一水平。断口观察表明,挤压态复合材料以基体韧性断裂为主要形式,而T4态复合材料除了基体韧性断裂外,还存在SiC颗粒断裂现象。挤压棒材锻造后有利于提高材料的横向强度。