PLC实现机床主轴自动换挡

以一台数控五坐标机床技术改造为实例，采用 Ｐ Ｌ Ｃ 实现主轴的自动换挡。通过状态及数据接口分析，提出主轴换挡的控制流程，总结出在机床控制中主轴换挡控制的一般原理与方法。     

RECENT PROGRESS IN THE PROJECT OF SPACE SOLAR TELESCOPE

In this paper, we introduce some process of the project of Space Solar Telescope in recent two years. The astronomic requirements have been further identified,the mission and operation requirements have been assessed, and some critical technologies have been performed. According to the time schedule, it is esti mated that the engineering model of the spacecraft would be completed and put into test operation in the end of 2004 and the spacecraft would be launched in about 2007.     

Passive target tracking using maximum likelihood estimation

Estimation of target trajectory from passive sonar bearings and frequency measurements in the presence of multivariate normally distributed noise, with unknown inhomogeneous general covariance, is modeled as a nonlinear multiresponse parameter estimation problem. It is shown that maximum likelihood estimation in this case is identical to optimizing a determinant criterion which has a concise form and contains no elements of unknown covariance matrix. A Gauss-Newton type algorithm using only the first-order derivatives of the model function and a new convergence criterion, is presented to implement such estimation. The simulation results demonstrate that performance of the maximum likelihood estimation method with the above noise model is superior to that with the traditional noise assumption     

某型飞机后边条焊接盒段优化研究

某型飞机后边条焊接盒段是用于安装平尾的重要受力构件,由材料为30CrMnSiA的板弯件、机加件及加强筋焊接组合而成。由于盒段焊缝数量多、零件壁厚薄,故在组合焊接时容易出现焊接变形、变形后校形困难等问题,使焊缝质量难以保证。本文对焊接盒段结构方案进行了优化研究,在最终选定的结构优化方案中,其盒段壁板为整体机加成型,大量采用机械连接,焊缝数量少,焊接形式简单,缩短了盒段的焊接周期,改善了焊接盒段生产的工艺性,满足了该型号飞机的批产要求。     

高教机天线布局影响通讯距离研究与改进

某型高级教练机在试飞中,出现空地通讯距离不满足战技指标要求的问题。经过分析发现,由于超短波电台天线作为单极天线,其安装布局未满足天线本身要求,即接地面尺寸过小、近场区环境复杂等,导致天线辐射性能受到影响。本文对天线阻抗和方向性系数进行了研究分析,并根据飞机情况制定相应的改进方案。     

A novel resonant converter topology for DC-to-DC power supply

A class-E DC-to-DC converter with half-wave controlled current rectifier is proposed. Its output voltage is controlled by the conduction angle of the rectifier switch at constant switching frequency. Zero voltage switching for all the switches can be maintained from full load to no load. Its steady state characteristics are analyzed and the effects of the circuit parameters are studied. Some extensions of the proposed converter are also discussed. The analysis is verified by PSPICE simulation and an experimental prototype     

如何开展院校任期经济责任审计

当前任期经济责任审计已成为审计部门的一项重要职责，如何开展院校任期经济责任审计，是摆在我们内审工作面前的重大课题。本从经济责任审计的重要性入手，对搞好经济责任审计的途径与方法作了探讨。     

Java赋值的特色

Java是一种与平台无关、可靠性强、小而灵活的编程语言。其赋值颇具特色。普通的赋值是用赋值运算符(=)进行的。它的意思是“取得右边的值,把它复制到左边”。右边的值可以是任何常数、变量或者表达式,只要能产生一个值就行。但左边的值必须是一个明确的、已定义的变量。也就是说,它必须有一个物理性的空间来保存右边的值。举个例子来说,可将一个常数赋给一个变量(A=4;)但不可将任何东西赋给一个常数(比如不能4=A)。对主数据类型的赋值是非常直接的。由于主类型容纳了实际的值,而且并非指向一个对象的指针,所以在为其赋值的时候,可将来自…     

The Dynamic Stability of a Dual-Spin Satellite

The attitude stability of a dual-spin satellite containing energy disipators on both bodies is investigated. Following Mingori, a symmetrical configuration of the satellite with a mass-spring-dashpot damper on each part is considered, and some new stability results are derived by the application of the Routh-Hurwitz criterion. lt is indicated that the Routh-Hurwitz criterion gives only sufficient conditions of stability for the dual-spin satellite considered. A criterion which is believed to represent both the necessary and sufficient condition of stability is presented here and this is used to check the stability of two specific designs of the dual-spin satellite.     

The GYROLITE: Is it Unstable?

A new derivation of the GYROLITE stability criterion is presented. It is confirmed that, for the satellite to have a stable attitude, the spinning part must have a favorable inertia ratio.