悬索桥颤振主动抑制研究

选用二次型性能指标，把悬索桥颤振主动抑制问题转化为线性二次型高斯问题，设计了颤振主动抑制的最优滤波器及最优控制律，其中，经ｏｇｅｒ有理近似拟合气动力自激项，对脉动风的描亭旭结为成型滤波器设计；稳定性判定归结为根轨迹图的判断；抖振响应计算归结为Ｌｙａｐｕｎｏｖ方程求解，以某悬索桥为算例，计算结果表明：对该类桥梁进行颤振主动抑制，效果良好，最优控制设计所得结论对工程具有一定参考价值。     

利用双目标优化寻求颤振抑制控制律

本文对一个三角机翼/外挂系统的颤振主动抑制进行了系统的研究。在理论上,对如何应用现代控制理论设计优化控制律进行了探讨;对非定常气动力拟合的Pade矩阵近似作了改进;提出了用理想极点和二次型性能指标进行双目标优化来确定加权矩阵的思想;在实现上,用状态观测器和单秩法极点配置两种方法设计了输出反馈控制律。风洞实验结果表明:用本文的方法所综合的控制律是合适有效的,成功地使机翼/外挂系统的颤振速度提高了15.7％,与理论计算结果吻合良好。     

飞机壁板结构的声疲劳计算及试验

 <正> 飞机结构所承受的噪声载荷声压级超过130dB时,经较长时间激励,往往在噪声诱导应力较大的区域里产生疲劳破坏。而在各种类型的结构件中声疲劳破坏的相对发生率以蒙皮壁板结构为最高。 本文采用矩形铝合金平板来模拟蒙皮壁板结构,对其进行了声疲劳寿命计算与试验研究.     

An Artificial Neural Network based approach for estimation of rain intensity from spectral moments of a Doppler Weather Radar

By using a Doppler Weather Radar (DWR) at Shriharikota (13.66°N & 80.23°E), an Artificial Neural Network (ANN) based technique is proposed to improve the accuracy of rain intensity estimation. Three spectral moments of a Doppler spectra are utilized as an input data to an ANN. Rain intensity, as measured by the tipping bucket rain gauges around the DWR station, are considered as a target values for the given inputs. Rain intensity as estimated by the developed ANN model is validated by the rain gauges measurements. With the help of a developed technique, reasonable improvement in the estimation of rain intensity is observed. By using the developed technique, root mean square error and bias are reduced in the range of 34–18% and 17–3% respectively, compared to Z–R approach.     

含多部位损伤搭接结构应力强度因子三维有限元分析

应力强度因子(Stress intensity factor,SIF)分析是含多部位损伤(Multiple site damage,MSD)结构剩余强度和裂纹扩展寿命预测的基础和关键。考虑接触与摩擦,建立了含MSD搭接结构的三维有限元模型,研究了不同裂纹长度、铆钉类型以及损伤模式下裂纹尖端SIF分布情况和变化规律。结果表明,搭接件孔边裂纹Ⅰ型SIF起主导作用,Ⅱ型和Ⅲ型SIF可忽略不计。由于次弯曲、铆钉变形和板厚度等因素,SIF在外表面最小,接触面一侧较大,最大值多位于蒙皮内部。MSD会使裂纹间的干涉作用增强,SIF增大,且裂纹间距离越近干涉作用越强。裂纹长度相同时,埋头铆钉的孔边裂纹SIF积分均值大于平头铆钉,且接触面的SIF埋头铆钉大于平头铆钉,外表面则相反。     

军用飞机环境适应性评价模型

阐述了作战飞机面临的环境,分析了各种环境因素对军用飞机作战性能的影响,建立了军用飞机环境适应性评价指标体系。确定了机场环境剖面和衡量各个评价因素样本数据的方法,并提出了军用飞机环境适应性评价模型,通过实例验证了模型的合理性和方法的可行性。算例和分析结论表明,该模型反映了军用飞机在环境适应性方面的技术要求,同时也为军用飞机在环境适应能力上的改进提供了参考。     

1种发动机自适应模型的修正方法

为解决由于工艺落后和性能衰退所导致的发动机模型与实际发动机失配的问题,从而达到视情维修的目的,建立了1种基于遗传算法的自适应模型修正方法.利用遗传算法高效率的全局搜索能力,以发动机性能参数为目标,优化部件参数,实现了模型的修正,并通过分析发动机性能参数对部件参数的敏感性,研究了选取不同组合的待修正部件参数对模型修正精度的影响.结果表明:采用该修正方法所建立的发动机模型准确性高、鲁棒性强,且具有良好的通用性,为发动机的健康管理和故障诊断提供了重要依据,具有很好的军事和工程应用价值.     

全电无人机主推进直驱永磁电动机热负荷研究

以全电无人飞机主推进直驱永磁电动机为研究对象,分析处于不同工况下主推进电动机热负荷特性.针对主推进电动机开启式结构特点,根据流体力学及传热学理论,建立强风冷却条件下流固耦合物理模型与数学模型,通过仿真计算不同热负荷、不同爬升角度时主推进电动机的温升,分析主推进电动机热负荷及温升随飞行工况的变化规律.对主推进电动机进行风洞与飞行试验.结果表明:热负荷为5500A2/(cm·mm2)时电动机最高温升为124K,与仿真值误差在2%以内,验证了理论分析正确性.无人机主推进电动机热负荷选取范围为3000~5500A2/(cm·mm2).      

纳米银膏与微米银膏烧结连接对比

用粒径20~80nm的纳米银膏和粒径1~3μm的微米银膏进行了烧结连接镀银铜块的对比实验.借助热/力物理模拟试验机Gleeble 1500D对接头剪切强度进行了测定.用扫描电镜及能谱分析仪对接头的微观组织进行了观察和分析.结果表明:在相同的连接条件下纳米银膏烧结连接的剪切强度明显高于微米银膏烧结连接的剪切强度.接头断口和显微组织分析表明,在相同条件下,纳米银膏烧结接头组织的质密性好于微米银膏烧结接头的组织质密性.在微米银连接接头中,由于Cu块-烧结银层间的界面处存在裂纹,其剪切强度较低.     

The photometric study of light scattering from the surface of alumina powder and interpretations by Hapke formula

A laboratory experiment helps to understand the light scattering property of regolith like samples with known compositions and other physical parameters. The laboratory data so obtained can be compared with the existing in situ data on celestial objects like asteroids. Further, it may be analyzed with the help of various theoretical models to understand the light scattering processes from regolith more clearly. In this work we have performed laboratory based photometry of the light scattered from the surfaces of powdered alumina (Al₂O₃) at various tilt angles of the sample and at large phase angles, with the particles having diameter 0.3 μm. The wavelength of observation was 632.8 nm. These data have been fitted by a surface scattering model originally suggested by Hapke. Instead of using empirical Henyey–Greenstein phase function to fix the values of albedo and phase function to be used within Hapke formula, we have used Mie theory for the same. This approach helped us to determine the single particle properties such as particle diameter and complex refractive index from surface scattering phase curve alone. Mie theory depends only on the size parameter X(=2π(radius/wavelength)) and complex refractive index (n, k) of the material. Since the absorption coefficient (k) for alumina is known to be very low but not exactly zero, the best fit to the experimental data was obtained by least square technique with k as a free parameter, as the other parameters are known. Finally, we compare our results with other published results and discuss the scope of application of the method we adopted.