基于MATLAB/Simulink的HY-2星载微波散射计系统仿真建模

为实现星载微波散射计的优化设计,利用MATLAB软件搭建了海洋二号(HY-2)卫星微波散射计系统仿真模型。首先,参考其初样设计阶段的仿真模型,根据其最终设计方案和参数设置,对发射机、接收机、信号处理单元三个主要模块搭建仿真模型。其次,模拟海面风场监测过程,将仿真模型划分为信号源、发射机、海面回波、接收机、信号处理单元和结果输出六部分,并在初样设计模型的基础上引入信道特性,完善仿真模型。最后,利用雷达方程解算海面后向散射系数,验证了模型的正确性,可为我国后续微波散射计的设计和优化提供仿真分析手段。     

Quaternion regularization in celestial mechanics and astrodynamics and trajectory motion control. I

Regularization problems in celestial mechanics and astrodynamics are considered. The fundamental regular quaternion models of celestial mechanics and astrodynamics are presented. It is shown that the efficiency of analytical investigation and numerical solution of boundary problems of optimal trajectory motion control of spacecraft may be increased using quaternion astrodynamics models. The regularization problem of celestial mechanics and astrodynamics that implies eliminating the feature, which arises in the equations of the two-body problem in case of impact of the second body with the central body, is considered in the first section of the paper. The quaternion method for regularizing the equations of the perturbed spatial two-body problem suggested by the author is presented; the method is compared with Kustaanheimo-Stiefel (KS) regularization. Demonstrative geometric and kinematic interpretations of regularizing transformations are provided. Regular quaternion equations for the two-body problem, which generalize the regular Kustaanheimo-Stiefel equations, as well as regular equations in quaternion osculating elements and quaternion regular equations for perturbed central motion of a material point, are considered. The papers on quaternion regularization in celestial mechanics and astrodynamics are briefly analyzed.     

Space experiments aboard the Lomonosov MSU satellite

At present, the Institute of Nuclear Physics of Moscow State University, in cooperation with other organizations, is preparing space experiments onboard the Lomonosov satellite. The main goal of this mission is to study extreme astrophysical phenomena such as cosmic gamma-ray bursts and ultra-high-energy cosmic rays. These phenomena are associated with the processes occurring in the early universe in very distant astrophysical objects, therefore, they can provide information on the first stages of the evolution of the universe. This paper considers the main characteristics of the scientific equipment aboard the Lomonosov satellite.     

火箭返回制导动力着陆段的自适应启动方法

针对重复使用火箭垂直返回着陆问题,提出了一种燃料最优的动力着陆段自适应启动方法。首先,将燃料最优启动点对应的动力着陆轨迹的推力剖面和攻角剖面描述为解析的形式,该解析形式中攻角剖面由状态量唯一确定,推力剖面仅含一个待定参数。随后,通过预测具有上述解析剖面形式的轨迹判断是否启动动力着陆。计算中引入松弛终端位置约束的策略求解推力剖面待定参数,由终端位置约束判断是否满足燃料最优启动条件。上述策略将燃料最优启动条件的判断问题简化为单一变量求解问题,实现了该问题的快速求解。仿真结果表明,该方法得到的启动点与数值优化方法得到的燃料最优启动点接近,且求解过程稳定、计算效率高。     

JPEG有损压缩图像保留格式加密研究

本文针对JPEG格式有损压缩图像加解密过程中图像数据损失较大的问题,提出了基于码流方式的保留格式加解密算法,并对JPEG图像加密算法的处理效果、效率及安全性进行了测试。通过实验发现,本文算法能够获得较好的JPEG有损压缩图像的保留格式加密效果。     

基于左手材料的翼面隐身结构设计及优化

翼面隐身结构能同时满足飞行器机翼气动、结构和隐身的要求,但在空间有限的机翼中应用时,由于结构特点使其隐身效果受到限制。为了解决该问题,在传统隐身结构中加入左手材料(LHM)进行改进。首先选取一种典型的LHM,从隐身设计角度出发,利用其雷达散射截面(RCS)计算不同入射角度下的后向吸收率,对其电磁特性进行研究。然后根据LHM的电磁特性,将其应用于翼面隐身结构,在相同的RCS减缩效果下,应用LHM可有效降低隐身结构体积。最后,为了进一步提高隐身效果,提出一种夹芯型LHM翼面隐身结构,并对该隐身结构中的结构参数利用代理模型进行优化。研究结果表明,相较金属翼面段RCS降低了15dB以上,较相同结构的翼面隐身结构RCS降低了10dB以上。     

非均匀入口与化学非平衡效应对尾喷管性能的影响研究

基于煤油燃料超燃冲压发动机尾喷管,对均匀入口和非均匀入口、冻结流动模型和化学非平衡模型下的尾喷管内流动进行数值模拟,采用两方程RNG k-ε湍流模型对三维NS方程组进行求解,获得非均匀入口与化学非平衡效应对尾喷管性能的影响。计算结果表明,尾喷管内流动非均匀性由尾喷管非对称膨胀和燃烧室出口非均匀等因素构成,尾喷管入口流动参数非均匀分布对尾喷管推力、升力及俯仰力矩均有影响,算例中非均匀入口使得尾喷管净推力相对于均匀入口增加了1.2%左右;尾喷管性能受化学非平衡效应的影响,非平衡流动模型下的其净推力计算结果相对于冻结流动模型增加3%~4%。     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

大型回流边界层风洞的气动与结构设计

大型边界层风洞是开展风工程研究的必备装备。以浙江大学ZD-1边界层风洞的研制为背景,详细介绍了大型回流边界层风洞气动设计和立式结构设计中的关键问题,在风洞气动设计时采用了收缩比为4∶1的单回路单试验段气动轮廓,在试验段中设置了0．22°的当量扩散角,对拐角导流片外形作了特殊处理,并采用钢结构与混凝土结构相结合的立式结构。流场校验结果表明,大型回流边界层风洞的气动与结构设计能满足设计要求,某些指标甚至达到航空风洞的标准,在试验段中设置扩散角有利于降低轴向静压梯度,立式结构设计对提高试验段气流的水平均匀性有一定的作用,可为今后类似风洞的研制提供参考。