一种新型多模式高速存储器

随着图像采集精度的提高和立体成像的需求,图像数据速率和总量呈几何级数增长,促进了高码率大容量存储的需求。提出一种新的高速存储器方案,通过改变FLASH类型和存储数据处理方式提高数据存储速率,以适应采集图像高精度和高速率的要求。     

Electrodynamic stabilization of earth-orbiting satellites in equatorial orbits

A satellite with electrodynamic stabilization system is considered. Based on the method of Lyapunov functions, sufficient conditions of the asymptotic stability of direct equilibrium position of this satellite in the orbital coordinate system under perturbing action of a gravitational moment are obtained. These conditions allow one to ensure a rational choice of parametric control coefficients depending on parameters of the satellite and its orbit.     

Study of backward propagating Langmuir waves with PIC simulation

The conversion of Langmuir waves into electromagnetic radiations is an important mechanism of solar type III bursts. Langmuir waves can be easily excited by electron beam instability, and they can be converted into backward propagating Langmuir waves by wave–wave interaction. Generally, the backward propagating Langmuir waves are very important for the second harmonic emission of solar type III bursts. In this work, we pay particular attention to the mechanism of the backward propagating Langmuir waves by particle in cell (PIC) simulations. It is confirmed that the ions play a key role in exiting the backward propagating Langmuir waves. Moreover, the electron beam can hardly generated the backward propagating Langmuir waves directly, but may directly amplify the second harmonic Langmuir waves.     

Improved Accuracy Metallic Resonator CVG

Metallic resonator Q-factor is very sensitive to the resonator's material, its thermal and chemical treatment, design, and environment; i.e., pressure and temperature. In order to obtain higher accuracy for CVG it is necessary to use resonator evacuation. Resonator mass plays a very important role in sensitivity to angle rate, in stability of vibration, in response to environmental condition changes, and also to external vibration and shock resistance. tnnalabs Holding Inc. uses a cylindrical resonator with increased rim thickness of up to 2 mmn and more. This concerns resonator material and design parameters selection, material thermal treatment to increase resonator Q-factor, and improved control algorithms in order to increase metallic CVG accuracy. As a result, CVG bias instability of 0.025 degth and random walk of 0.008 degvh for the resonator diameter 43 mmn, and 0.2 deg/h for the resonator diameter 25 mm were obtained. Future opportunities for Innalabs CVG is also discussed herein. Test results are presented for CVG43 and CVG25. Three-axis CVG unit under control of one DSP "Sharc" and IMU parameters are forecasted.     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

Relativistic electrons high doses at International Space Station and Foton M2/M3 satellites

The paper presents observation of relativistic electrons. Data are collected by the Radiation Risk Radiometer-Dosimeters (R3D) B2/B3 modifications during the flights of Foton M2/M3 satellites in 2005 and 2007 as well as by the R3DE instrument at the European Technology Exposure Facility (EuTEF) on the Columbus External Payload Adaptor at the International Space Station (ISS) in the period February 20 – April 28, 2008. On the Foton M2/M3 satellites relativistic electrons are observed more frequently than on the ISS because of higher (62.8°) inclination of the orbit. At both Foton satellites the usual duration of the observations are a few minutes long. On the ISS the duration usually is about 1 min or less. The places of observations of high doses due to relativistic electrons are distributed mainly at latitudes above 50° geographic latitude in both hemispheres on Foton M2/M3 satellites. A very high maximum is found in the southern hemisphere at longitudinal range 0°–60°E. At the ISS the maximums are observed between 45° and 52° geographic latitude in both hemispheres mainly at longitudes equatorward from the magnetic poles. The measured absolute maximums of dose rates generated by relativistic electrons are found to be as follows: 304 μGy h⁻¹ behind 1.75 g cm⁻² shielding at Foton M2, 2314 μGy h⁻¹ behind 0.71 g cm⁻² shielding at Foton M3 and 19,195 μGy h⁻¹ (Flux is 8363 cm⁻² s⁻¹) behind les than 0.4 g cm⁻² shielding at ISS.     

System of works on numerical modeling of the dynamics of the structure of the Space Radiotelescope in the RadioAstron project

The results of modeling the dynamics of the Space Radiotelescope are presented. The results of ground-based vibration-dynamic tests are used to validate the calculation models and estimate the damping levels. The dynamic distortions of the reflecting surface caused by the operation of the pointing mechanism of the high-gain antenna are estimated.     

The results of flight tests of an attitude control system for the Chibis-M microsatellite

The attitude control system of the Chibis-M microsatellite is described. Results of flight experiments on damping the initial angular velocity (made using magnetorquers) are considered, as well as stabilization in the orbital referece frame, and orientation of solar arrays toward the Sun using reaction wheels. The operation of algorithms of satellite attitude determination on sunlit and shadow segments of the orbit is also under study. The general logic of operation of the attitude control system in automatic mode is presented and discussed.     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.