JPEG有损压缩图像保留格式加密研究

本文针对JPEG格式有损压缩图像加解密过程中图像数据损失较大的问题,提出了基于码流方式的保留格式加解密算法,并对JPEG图像加密算法的处理效果、效率及安全性进行了测试。通过实验发现,本文算法能够获得较好的JPEG有损压缩图像的保留格式加密效果。     

基于左手材料的翼面隐身结构设计及优化

翼面隐身结构能同时满足飞行器机翼气动、结构和隐身的要求,但在空间有限的机翼中应用时,由于结构特点使其隐身效果受到限制。为了解决该问题,在传统隐身结构中加入左手材料(LHM)进行改进。首先选取一种典型的LHM,从隐身设计角度出发,利用其雷达散射截面(RCS)计算不同入射角度下的后向吸收率,对其电磁特性进行研究。然后根据LHM的电磁特性,将其应用于翼面隐身结构,在相同的RCS减缩效果下,应用LHM可有效降低隐身结构体积。最后,为了进一步提高隐身效果,提出一种夹芯型LHM翼面隐身结构,并对该隐身结构中的结构参数利用代理模型进行优化。研究结果表明,相较金属翼面段RCS降低了15dB以上,较相同结构的翼面隐身结构RCS降低了10dB以上。     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

一种用于卫星侦察的直扩信号参数估计方法

针对卫星通信侦察过程中,信号参数未知的特点,提出了一种直接序列扩频(DS-SS)信号的参数估计算法.首先利用直扩信号中PN序列调制信息码的循环平稳特性,采用循环自相关函数对PN码周期进行估计,再利用相关特性估计出信息码与PN码的同步调制起始点,进行伪码序列的识别.计算机仿真实验验证了该方法的有效性,在极低信噪比条件下可以得到准确的伪码序列估计.     

轴流压缩系统带支板过渡段的轴对称等效方法

 航空发动机轴流压缩系统过渡段内存在厚支板,该支板造成的堵塞对过渡段的性能产生重要影响,同时也使过渡段内流动成为三维复杂流动,增加了设计难度。建立了一种等效方法,通过构造与带支板过渡段具有相似气动特性的轴对称过渡段,近似地等效原带支板过渡段,从而将复杂的三维问题简化为二维轴对称问题。首先,理论推导了带支板过渡段的轴对称等效方法;随后,通过数值模拟方法,对带支板过渡段和等效过渡段内的流动特性进行对比,结果表明等效过渡段不仅与带支板过渡段的静压分布吻合很好,并且两者具有相似的损失规律,说明等效方法能客观地反映支板对过渡段内流动的影响;最后,将轴对称等效方法应用于带支板过渡段原型的改进设计,改进设计后带支板过渡段支板与轮毂角区的大范围流动分离被消除,损失减小了41.6%。     

基于TMS320F28335 的一种多机多通道通讯方法的设计

TMS320F28335 是TI 公司的一款数字信号处理芯片,具备丰富的外设接口,器件可靠性强,在机载机电、接口、控制领域得到应用。面对嵌入式控制器多机通讯的需求,使用TMS320F28335 的McBSP 接口和DMA 功能设计一种时分复用的多机多通道通讯方法,硬件接口直连,软件通过DMA 自动完成帧数据收发,避免通讯对DSP 内核的占用,实现一种经济、可靠的多机通讯方案。     

钛合金表面低氧压熔结Al-Si涂层及抗氧化能力

采用低氧压高温快速熔结技术在Ti-6Al-4V合金表面成功地制备出抗高温氧化的Al-Si熔结涂层.与Si改性渗涂层相比,这种工艺相对简单,不需要经过长时间的扩散就能形成足够厚度的Al-Si熔结涂层,省时节能,且涂层中抗氧化元素铝、硅的浓度可通过调整粉末的混合比例来进行控制.X射线检测表明涂层主要由Ti₅Si₃和TiAl₃组成.在923K空气中52h循环氧化试验结果表明:低氧压熔结Al-Si涂层在前10h的氧化过程中氧化增重较快,而在随后的氧化过程中氧化增重较为缓慢,而Si改性渗涂层在氧化过程中一直保持着较高的氧化速率.      

一种相控阵雷达系统效能评估方法

文章从武器系统效能评估定义出发,建立了相控阵雷达系统评估的指标体系,并通过将群体决策引入AHP算法确立了各指标权重,采用云重心法对系统综合效能进行了分析,进而建立了完整的对相控阵雷达系统效能评估的方法,最后通过实例进行分析。