数控机床产业发展现状及沈阳机床自主创新之路

数控机床是现代机械制造业的关键设备,一个国家数控机床的产量和技术水平在某种程度上代表这个国家的制造业水平和竞争力。数控技术的发展,关系到国家工业战略地位和综合国力水平。数控机床拥有量和年产量是衡量一个国家制造业现代化水平的重要标志。     

一种基于DPCA的星载SAR运动目标检测方法

文中研究星载条件下用DPCA检测地面慢速运动目标的SAR-GMTI技术,提出一种对杂渡抑制以后的原 始数据应用Radon变换来检测运动目标的新方法。与基于图像域的DPCA运动目标检测方法相比,该方法不需要方位 压缩,因而减小了计算负荷,但没有损失目标检测性能。此外,该方法更加清楚地显示出杂波对目标参数估计的影响,可 为进一步研究提供思路。仿真结果证明这种方法的正确性和有效性。     

液体火箭发动机离心泵叶轮的多目标优化设计

根据液体火箭发动机系统设计确定的离心泵的性能参数,对泵叶轮的几何参数分别进行了单目标和多目标优化设计。优化目标包括:泵的扬程、效率和轴功率。在多目标优化设计当中,采用超传递近似法对目标之间的重要性进行模糊评价,确定各目标的权值,从而求出优化结果。比较结果表明,多目标优化比单目标优化所得结果更符合工程要求,而对目标的重要性进行评价,所得优化结果更符合设计者的偏好。     

法国冲压发动机研究进展

综述了法国自上世纪八十年代中期以来在冲压发动机研制方面的技术进展。介绍了冲压发动机研制的试验技术指标及数值模拟技术,并对法国亚燃冲压发动机、超燃冲压发动机的研制进行了分析介绍。     

航天飞机末端能量管理段在线轨迹设计方法

研究了航天飞机末端能量管理段飞行轨迹的一种在线设计新方法。根据飞行器当前的     

PARAMETER ANALYSIS ON CIRCULATION CONTROLLED CIRCULAR CYLINDER FOR NOTARTM TAIL BOOM

Lift on circulation control （CC） circular cylinder is calculated via numerical simulations based on 2D real- izable k-e epsilon viscous model and compared with experimental data. The simulation result shows an acceptable agreement with tested data. With the proved grid and simulation method, series of simulations are conducted to study the effect of parameters on lift. Single slotted tail booms under different clown wash velocities are optimized with the principle of generating maximum total moment around the main rotor shaft with same total power con- sumption. The results show that larger jet flow velocity, or smaller blow angle, or larger diameter of the cross section can help generating larger lift while enhancing the attachment of both the jet flow and down wash flow. Multiple slotted tail boom is better because it increases lift with same total slot width, and can increase lift by in- creasing total slot width without causing separation, also it helps generating high steady lift at a big rank of slot at- tack angles. To mount a guide vane （GV） at the exit of the slot, or shape the upper slot wall like a smooth-GV, or design the slot with an edge fillet is not recommended because it reduces the velocity of both the jet flow and the upstream of the attached downwash flow. Compared with other shapes of the slots, arcs-profiled slot performs better because of larger jet flow velocity and smaller blow angle. In order to generate the largest moment with same total power consumed by the entire NOTARTM system, total width of the slots and slot attack angle should be optimized according to velocity of down wash flow.     

SIMULATION OF COMPOSITE NON-LINEAR MECHANICAL BEHAVIOR OF CMCS BY FEM-BASED MULTI- SCALE APPROACH

The non-linear behavior of continuous fiber reinforced C/SiC ceramic matrix composites （CMCs） under tensile loading is modeled by three-dimensional representative volume element （RVE） models of the composite. The theoretical background of the multi-scale approach solved by the finite element method （FEM） is recalled first- ly. Then the geometric characters of three kinds of damage mechanisms, i.e. micro matrix cracks, fiber/matrix interface debonding and fiber fracture, are studied. Three kinds of RVE are proposed to model the microstructure of C/SiC with above damage mechanisms respectively. The matrix cracking is modeled by critical matrix strain en- ergy （CMSE） principle while a maximum shear stress criterion is used for modeling fiber/matrix interface debond- ing. The behavior of fiber fracture is modeled by the famous Weibull statistic theory. A numerical example of con- tinuous fiber reinforced C/SiC composite under tensile loading is performed. The results show that the stress/ strain curve predicted by the developed model agrees with experimental data.     

基于Web信息处理的机位信息融合设计与实现

基于Web应用逆向工程提出一种网页信息提取的数据融合方案,利用HTTP的POST请求智能获取网页信息,通过自定义串口协议将数据送至服务器,最终采用C#正则表达式提取有效信息,设计在汕头空管站飞行计划处理系统(FIPS)与潮汕机场航班信息查询系统的数据融合中投入实际应用。     

全内反射测速技术(TIRV)中界面隐失波基准光强I0的确定

基于隐失波全内反射的测速技术TIRV (Total internal reflection velocimetry)是微纳流动中测量壁面附近几百纳米范围内速度的有效方法。隐失波的光强分布I (z)随离开壁面的高度z指数衰减。若荧光粒子位于光强分布中,其亮度也将符合此指数关系,通过测量粒子亮度可确定粒子的垂向位置z,而确定隐失波的基准光强I0是该技术的关键之一。基于粒子近壁Boltzmann浓度分布、粒子粒径不均匀性和隐失波光强公式,给出了粒子亮度概率密度分布的数值解。实验测量粒子统计亮度分布后,依据实验和理论分布相同原则可定量确定基准光强I0。采用φ100nm和φ250nm 荧光粒子验证此方法并定量分析了粒径分散性对确定 I0的影响。进一步采用φ100nm粒子进行近壁速度测量实验,结果验证了本方法的有效性。     

采用长细管法进行脉动压力转捩探测的实验研究

为了简便地使用测量模型表面脉动压力特征的方法探测边界层转捩位置,需要研究脉动压力传感器接在传统测压模型外的适用性,即通过长细管将模型表面的脉动压力信号传递到脉动压力传感器上的方式是否可得到转捩的特征信号。首先采用信号发生器驱动扬声器,在无风条件下,测量了长细管对不同频率声压信号的传递损失情况。证明了所采用的长细管系统具有合适的工作频带。然后在西北工业大学NF-3低速风洞二元实验段、实验风速为30m/s的条件下,对弦长为800mm、展长为1.6m的翼型模型沿弦向进行了脉动压力信号测量,并通过改进的数据处理技术判断了模型表面的转捩位置。研究结果表明,采用长细管系统进行脉动压力方法转捩探测具有一定应用价值,值得进一步深入研究。