飞行器气动与隐身性能一体化优化设计方法研究

首先根据多学科综合优化设计理论 ,针对飞行器外形布局设计特点 ,开展飞行器气动与隐身性能综合优化设计方法研究。分别采用线化格林函数法与粘性修正相结合以及物理光学法与等效电流法相结合的方法 ,建立了飞行器气动力特性与隐身特性的计算方法。利用多学科优化设计理论和遗传优化算法 ,开展了关于飞行器气动与隐身性能的协同优化设计方法研究。取得了初步的研究结果。     

用双激波模型计算风扇/压气机非设计点的性能

根据现代高速风扇/压气机内激波波系的真实结构,将适用于预测高速叶型激波损失的双激波模型引入基于基元叶片特性的流线曲率法程序,发展了一种用于预估高速风扇/压气机非设计点性能的方法。该双激波模型考虑了来流马赫数和攻角变化,较真实地反映了高马赫数风扇/压气机的实际工作状况,扩展预测风扇/压气机非设计点性能的能力。利用该模型,本文分别对一台叶尖马赫数达到1.4的大涵道比风扇和一台叶尖马赫数高达1.5的三级风扇的非设计点性能进行了计算,计算结果与试验结果保持了较高的吻合性。     

一种新型微型杆式超声电机及其驱动原理

提出了一种新型微型杆式超声电机,并对该杆式电机的驱动机理进行了仿真。该电机采用两段金属柱体压紧5片压电陶瓷片作为定子。该定子结构和压电陶瓷片的布局方式可以提高其机电转换效率。为尽量减小定、转子之间的径向滑移以提高摩擦传动效率,电机采用了柔性转子,对原理样机及其微型驱动器进行了性能实验。电机的外径为9mm,长度为15mm,重3.2g。当电机工作在杆式定子的一阶弯曲频率(72kHz)附近时,电机实测最大转速为520r/min,最大输出力矩为4.5mN·m。实验结果表明,该电机具有良好的稳定性,利用频率自动跟踪技术对电机转速进行闭环控制,可以将其转速波动稳定在3%之内。     

上游转子对下游静子叶片气动力的影响

为研究轴流压气机下游静子叶片非定常气动力的大小和频率的变化规律,采用在静子叶片表面埋设微型动态压力传感器的方法,在低速单级轴流压气机实验器上进行了静子叶片表面压力的测量。测量了不同轴向间距、不同转速下从近堵塞到近失速的宽广流量范围,并对所测得的静子叶片非定常气动力进行了离散傅立叶变换,以分析其频谱特性。实验结果表明：在转子尾迹的影响下,静子叶片表面的波动频率是转子的尾迹频率及其倍频。转子尾迹频率的高频分量对静子叶片吸力面前缘的影响比对其他位置的影响大。叶片表面的非定常压力和气动力随压气机流量、转速和轴向间距的变化而变化。     

稻城太阳射电望远镜(DSRT)天线遮挡效应仿真

稻城太阳射电望远镜（DSRT）由313面6 m直径抛物面天线组成。天线接收信号幅值和相位的精确修正是决定DSRT成像质量的关键因素。然而DSRT阵列可能会出现邻近天线相互遮挡的问题,从而改变接收信号的幅值和相位,影响其成像质量。利用电磁仿真软件计算了接收频率为300 MHz（波长λ=1 m）时的相邻两单元与相邻三单元两种情况。三元系统中遮挡效应的影响仅比双元系统中相关影响略为显著。在本文考虑的最严重的遮挡情况（天线边缘的投影间距D = –1λ）下,对于双/三元系统,相对于单天线系统水平和垂直增益分别降低了0.6/0.6 dB和 0.3/0.4 dB,相位偏差分别为–3.3º/–3.871º和–1.744º/–2.244º。此外还分析了其他遮挡情况。研究表明DSRT系统中的天线遮挡效应分析可由双元系统充分描述,在后期数据处理时应适当考虑该效应,尽量提升DSRT数据的利用效率和成图质量。     

“无碰撞电子热传导"与多方关系

本文从矩方程出发,用多方关系假设导出了Hollweg根据定性分析提出的“无碰撞电子热传导”公式,确定了该公式中的无量纲常数与多方指数之间的联系,进一步讨论了“无碰撞电子热传导”公式的适用条件     

High temporal resolution global PWV dataset of 2005–2016 by using a neural network approach to determine the mean temperature of the atmosphere

Atmospheric water vapour plays an important role in phenomena related to the global hydrologic cycle and climate change. However, the rapid temporal–spatial variation in global tropospheric water vapour has not been well investigated due to a lack of long-term, high-temporal-resolution precipitable water vapour (PWV). Accordingly, this study generates an hourly PWV dataset for 272 ground-based International Global Navigation Satellite System (GNSS) Service (IGS) stations over the period of 2005–2016 using the zenith troposphere delay (ZTD) derived from global-scale GNSS observation. The root mean square (RMS) of the hourly ZTD obtained from the IGS tropospheric product is approximately 4 mm. A fifth-generation reanalysis dataset of the European Centre for Medium-range Weather Forecasting (ECMWF ERA5) is used to obtain hourly surface temperature (T) and pressure (P), which are first validated with GNSS synoptic station data and radiosonde data, respectively. Then, T and P are used to calculate the water vapour-weighted atmospheric mean temperature (Tm) and zenith hydrostatic delay (ZHD), respectively. T and P at the GNSS stations are obtained via an interpolation in the horizontal and vertical directions using the grid-based ERA5 reanalysis dataset. Here, Tm is calculated using a neural network model, whereas ZHD is obtained using an empirical Saastamoinen model. The RMS values of T and P at the collocated 693 radiosonde stations are 1.6 K and 3.1 hPa, respectively. Therefore, the theoretical error of PWV caused by the errors in ZTD, T and P is on the order of approximately 2.1 mm. A practical comparison experiment is performed using 97 collocated radiosonde stations and 23 GNSS stations equipped with meteorological sensors. The RMS and bias of the hourly PWV dataset are 2.87/?0.16 and 2.45/0.55 mm, respectively, when compared with radiosonde and GNSS stations equipped with meteorological sensors. Additionally, preliminary analysis of the hourly PWV dataset during the EI Niño event of 2014–2016 further indicates the capability of monitoring the daily changes in atmospheric water vapour. This finding is interesting and significant for further climate research.     

Particle swarm optimization applied to hypersonic reentry trajectories

This paper presents the novel use of the particle swarm optimization(PSO)to generate the end-to-end trajectory for hypersonic reentry vehicles in a quite simple formulation.The velocitydependent bank angle profile is developed to reduce the search space of unknown parameters based on the constrained PSO algorithm.The path constraints are enforced by setting the fitness function to be infinite on condition that the particles violate the maximum allowable values.The PSO algorithm also provides a much easier means to satisfy the terminal conditions by adding penalty terms to the fitness function.Furthermore,the approximate reentry landing footprint is fast constructed by incorporating an interpolation model into the standardized bank angle profiles.Numerical simulations demonstrate that the PSO method is a feasible and flexible tool to generate the end-to-end trajectory and landing footprint for hypersonic reentry vehicles.     

无源滤波器频率漂移的一种迭代算法

文章介绍了无源滤波器在试验过程中产生的典型幅频特性漂移曲线，并针对这些典型曲线提出了基于均方误差最小原则和牛顿迭代的频率漂移算法。     

预燃式等离子体射流点火器工作特性实验研究

为解决发动机点火包线小于飞行包线的实际问题,提供等离子体点火技术在航空发动机中的工程应用新思路,论文设计了一种预燃式等离子体射流点火器,实验研究了放电特性和射流特性。结果表明,预燃式等离子体射流点火器与空气等离子体射流点火器相比,在提升射流能量降低电源功率方面有着较大的优势,电流相同时通入甲烷在较大流量时可减小驱动电源功率,总流量为44L/min时,减幅可达14.99%;同时预燃式等离子体射流较空气等离子体射流稳定,且射流长度增加,扩大了点火面积,有利于点火。