Numerical analysis on noise of rotor with unconventional blade tips based on CFD/Kirchhoff method

A solver is developed aiming at efficiently predicting rotor noise in hover and forward flight. In this solver, the nonlinear near-field solutions are calculated by a hybrid approach which includes the Navier-Stokes and Euler equations based on a moving-embedded grid system and adaptive grid methodology. A combination of the third-order upwind scheme and flux-difference splitting scheme, instead of the second-order center-difference scheme which may cause larger wake dissipation, has been employed in the present computational fluid dynamics (CFD) method. The sound pressure data in the near field can be calculated directly by solving the Navier-Stokes equations, and the sound propagation can be predicted by the Kirchhoff method. A harmonic expansion approach is presented for rotor far-field noise prediction, which gives an analytical expression for the integral function in the Kirchhoff formula. As a result, the interpolation process is simplified and the efficiency and accuracy of the interpolation are improved. Then, the high-speed impulsive (HIS) noise of a helicopter rotor at different tip Mach numbers and on different observers is calculated and analyzed in hover and forward flight, which shows a highly directional characteristic of the rotor HIS noise with a maximum value in the rotor plane, and the HSI noise weakens rapidly with the increasing of the directivity angle. In order to investigate the effects of the rotor blade-tip shape on its aeroacoustic characteristics, four kinds of blade tips are designed and their noise characteristics have been simulated. At last, a new unconventional CLOR-II blade tip has been designed, and the noise characteristics of the presented CLOR-II model rotor have been simulated and measured compared to the reference rotors with a rectangular or swept-back platform blade tip. The results demonstrate that the unconventional CLOR-II blade tip can significantly reduce the HSI noise of a rotor.     

TTE通信技术在混合安全关键系统的应用

确定性通信是构建混合安全关键系统的关键技术。分析了混合安全关键系统对网络通信的要求,探讨了时间触发以太网的体系结构、时钟同步机制、数据传输控制机制、余度与故障控制机制等,针对混合安全关键系统的要求,详细分析了时间触发以太网的实时性、确定性、高可靠性等特性。分析表明:时间触发以太网是构建混合安全关键系统的优选通信网络,能有效降低系统集成复杂性和费用。     

基于聚类分析和投影距离融合的航空发动机

针对类别判定时对类中个体信息挖掘不足的情况,提出1种新的类别判别方法,充分利用了某1类中各成员的信息,构造待测样本的投影距离,并以此作为分类标准.考虑单一分类标准的片面性,将滑油中金属变化量及变化率进行融合.取距离倒数作为融合参数,得到最终分类结果,从而判断航空发动机所处的性能状况.实例表明:对于测量参数存在小幅值随机噪声的情况,也能得到准确的分类结果,为发动机视情维修提供参考依据.     

Integration of GPS and low cost INS for pedestrian navigation aided by building layout

In outdoor environments, GPS is often used for pedestrian navigation by utilizing its signals for position computation, but in indoor or semi-obstructed environments, GPS signals are often unavailable. Therefore, pedestrian navigation for these environments should be realized by the integration of GPS and inertial navigation system （INS）. However, the lowcost INS could induce errors that may result in a large position drift. The problem can be minimized by mounting the sensors on the pedestrian＇s foot, using zero velocity update （ZUPT） method with the standard navigation algorithm to restrict the error growth. However, heading drift still remains despite using ZUPT measurements since the heading error is unobservable. Also, tbot mounted INS suffers from the initialization ambiguity of position and heading from GPS. In this paper, a novel algorithm is developed to mitigate the heading drift problem when using ZUPT. The method uses building lay- out to aid the heading measurement in Kalman filter, and it could also be combined for the initial- ization. The algorithm has been investigated with real field trials using the low cost Microstrain 3DM-GX3-25 inertial sensor, a Leica GS10 GPS receiver and a uBlox EVK-6T GPS receiver. It could be concluded that the proposed method offers a significant improvement in position accuracy for the long period, allowing pedestrian navigation for nearly40 min with mean position error less than 2.8 m. This method also has a considerable effect on the accuracy of the initialization.     

An experimental study of the dual-loop control of electro-hydraulic load simulator （EHLS）

This paper investigates motion coupling disturbance（the so called surplus torque）in the hardware-in-the-loop（HIL）experiments.The＇＇velocity synchronization scheme＇＇was proposed by Jiao for an electro-hydraulic load simulator（EHLS）in 2004.In some situations,however,the scheme is limited in the implementation for certain reasons,as is the case when the actuator＇s valve signal is not available or it is seriously polluted by noise.To solve these problems,a＇＇dual-loop scheme＇＇is developed for EHLS.The dual-loop scheme is a combination of a torque loop and a position synchronization loop.The role of the position synchronization loop is to decouple the motion disturbance caused by the actuator system.To verify the feasibility and effectiveness of the proposed scheme,extensive simulations are performed using AMESim.Then,the performance of the developed method is validated by experiments.     

Reentry trajectory optimization for hypersonic vehicle satisfying complex constraints

The reentry trajectory optimization for hypersonic vehicle（HV）is a current problem of great interest.Some complex constraints,such as waypoints for reconnaissance and no-fly zones for threat avoidance,are inevitably involved in a global strike mission.Of the many direct methods,Gauss pseudospectral method（GPM）has been demonstrated as an effective tool to solve the trajectory optimization problem with typical constraints.However,a series of diffculties arises for complex constraints,such as the uncertainty of passage time for waypoints and the inaccuracy of approximate trajectory near no-fly zones.The research herein proposes a multi-phase technique based on the GPM to generate an optimal reentry trajectory for HV satisfying waypoint and nofly zone constraints.Three kinds of specifc breaks are introduced to divide the full trajectory into multiple phases.The continuity conditions are presented to ensure a smooth connection between each pair of phases.Numerical examples for reentry trajectory optimization in free-space flight and with complex constraints are used to demonstrate the proposed technique.Simulation results show the feasible application of multi-phase technique in reentry trajectory optimization with waypoint and no-fly zone constraints.     

一种镍基单晶高温合金的高温蠕变行为

采用扫描电镜、透射电镜等方法研究了一种镍基单晶高温合金在1000℃的高温低应力蠕变行为。实验结果表明:合金蠕变速率呈现出先减小再增大的变化趋势,当应变量达到一定临界值(1±0.2)%后,变形速率迅速上升,蠕变进入第三阶段。高温蠕变初始阶段的主要变形机制为a/2〈110〉{111}型位错环在基体内运动。合金在高温蠕变稳态阶段的主要变形机制为位错切割γ’相,切割位错主要有螺型位错对和[001]超位错两种形式。     

A new design of low-power portable digital ionosonde

The Ionospheric Laboratory of Wuhan University is interested in upgrading its instrumentation replacing the WIOBSS (Wuhan Ionospheric Oblique Backscattering Sounding System) with a more flexible and automatic ionosonde. Then the updated ionosonde WMI (Wuhan Multifunctional Ionosonde) with automatic ionogram scaling has been developed to satisfy future research. The new system not only inherited some classic techniques from WIOBSS, such as the pulse compression and the coherent integration techniques, but also made great improvements in hardware design and software updating. This paper mainly introduces evolutions of this new ionosonde in both digital transceiver and digital signal processing domain, and also presents some observations.     

某交流换流器自动测试系统设计

提出了交流换流器自动测试系统的解决方案,分别从硬件和软件两方面做了详细分析,并介绍了各主要参数的测试方法。系统的实际应用表明:本设计方案能够实现交流换流器主要被测参数的自动测试,可靠性和准确性能够满足交流换流器各项技术指标的要求。     

基于ADRC的航空发动机限制保护器设计

发动机限制保护器在航空发动机运行过程中对特定的被限制量进行实时监控,在其超出安全范围时实施限制,实现对航空发动机的保护.将自抗扰技术用于限制保护控制器设计,利用自抗扰控制器的扩张观测器,动态估计未知扰动和系统特性,对实际控制量进行反馈补偿,实现超限后的快速保护,提高了发动机的安全性.仿真结果表明:所设计的自抗扰限制保护控制器能将超限偏差有效转化为对主回路指令的修正,综合控制系统响应速度快,达到了限制保护的目的.