为中国开发太空探路 创中国首飞太空记录——纪念T-7系列探空火箭首次发射成功45周年

在中国第一个实用探空火箭系列——T-7系列探空火箭首次发射成功45周年之际，回顾了该系列火箭的研制由来和基本情况，论述了该系列火箭对中国开发中层大气和太空所起到的探路作用。     

The 2002 Space Cooperation Protocol between China and Brazil: An excellent example of South–South cooperation

China and Brazil have been cooperating in space since 1986 and, after 15 years of successful joint creative work, the two sides agreed a 2002 Protocol, providing a more concrete framework for further cooperation in space projects. This bilateral agreement was heralded as an authentic bilateral effort amplifying the so-called South–South relationship. A close examination of the Protocol has revealed that the document, while responding to the UN Declaration on International Cooperation, has made a significant contribution and set a good example for space cooperation among developing countries. Placed against the background of ongoing space commercialization, the success of this model can test the viability of existing space commercial rules and help introduce further improvements.     

引信天线参数设计中的概率方法

本文从引信的最一般概念出发给出了确定引信天线付瓣电平参数的概率解析法，论理严谨，经济适用，根据这种方法确定天线付瓣电平是建立在引信付瓣启动的小概率原理上的。适用于小型计算机计算。文中还给出了计算实例供设计参考。     

固体火箭发动机排气二次燃烧的抑制技术

介绍了无烟固体火箭推进剂研究的最新进展——固体火箭发动机排气二次燃烧的抑制技术,内容包括二次燃烧的产生机理、抑制机理和国外技术现状等.国外经验表明,采用少量的抑制剂可以达到对高能无烟推进剂发动机排气二次火焰的抑制.     

红外隐身材料的研究进展

红外探测器的高度发展已使用于目标表面的热红外隐身材料成为飞行器隐身技术中的一个重要组成部分。但对这种材料的发展情况,以往的文献一向较少涉及。本文概括了这种材料的一般性能要求,较全面地评述了十余年来红外隐身材料研究中各主要方面的发展情况,并分析了一些重要材料品种的特点、性能水平、技术影响因素、存在的问题和发展趋势。     

一类挠性航天器的变结构控制

本文研究在控制器能量受限条件下，一类挠性航天器的姿态控制问题。考虑刚性主体上带有挠性梁的航天器，并假定系统在一平面内作旋转运动。针对航天控制工程中执行机构的工作模式，基于系统的无穷维模型，本文设计了简单易行的变结构控制方案，并证明了相应的闭环系统的渐近稳定性。数值仿真和物理实验结果显示了所设计的控制算法的有效性。     

TDICCD相机数据采集与图像处理技术

研制了一种TDICCD相机实时图像采集和微机快视系统,文中介绍了该系统的3个模块:信号采集电路、图像存储和微机滚动显示部分。     

国外对GAP／AN推进剂燃烧性能和感度的研究

介绍了国外对ＧＡＰ／ＡＮ复合燃烧性能研究的新进展，探讨了少量添加剂对ＧＡＰ／ＡＮ推进剂燃速特征的影响，评价了ＧＡＰ／ＡＮ推进剂的印感性能。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.