负压式平板型环路热管试验

为解决高热流密度电子器件的散热问题,设计了一套负压式铜 甲醇环路热管,其蒸发器设计成平板型。研究表明,该平板型环路热管具有较高的散热能力,能够在无重力姿态和重力姿态下顺利启动。当重力倾角分别为0°、18°和30°,热负荷为160W时,蒸发器壁面温度分别达到85.8℃、66.3℃和64.6℃。按照环路热管启动状态,其启动过程可分为3个阶段：加热阶段、预启动阶段和后启动阶段。在低热负荷区域,环路热管会出现温度波动现象。增大重力倾角,有利于降低蒸发器壁面温度和热阻。当重力倾角为30°,热负荷从10W递增到160W时,环路热管的热阻从4.97℃/W降低到0.39℃/W。     

费用约束下含应力优化的CSADT设计

恒定应力加速退化试验(CSADT,Constant Stress Accelerated Degradation Testing)方案中需要确定的变量有应力水平、各应力下样本量、监测间隔和各应力下监测次数.如何对CSADT的应力水平进行优化目前很少有人探讨.针对这一问题提出一种在费用约束下将上述4个变量进行综合优化的方法.首先用随机过程描述CSADT下产品的性能退化过程,然后以产品在使用条件下p分位寿命可靠度的渐近方差最小为目标,以试验费用不超过预算为约束条件,给出CSADT的4个优化变量,并给出应用该优化方法的仿真算例.最后,优化方案对模型参数偏差的敏感性分析表明,在一定偏差范围内优化结果具有良好的稳健性.      

改进的风险优先数(RPN)分析方法

针对工艺故障模式影响分析(PFMEA,Process Failure Modes and Effects Analysis)中风险优先数(RPN,Risk Priority Number)分析方法存在的缺陷,在分析导致这些缺陷的原因的基础上,提出了一种基于费用及发生概率的定性与定量相结合的RPN分析方法.该方法中定性分析部分以传统RPN分析方法中的严酷度等级评价为基础,对工艺故障模式的严酷度等级进行评价;定量分析部分以故障模式发生后导致的费用损失的期望值作为RPN值.改进后的RPN分析方法中,定量化的数据使得风险排序更为客观、准确.最后,使用改进后的RPN分析方法对相控阵雷达中某组件的滤波器装配工艺进行了PFMEA分析,取得了良好的效果.      

Low-dose carbon ion irradiation effects on DNA damage and oxidative stress in the mouse testis

To investigate the effects of low-dose carbon ion irradiation on reproductive system of mice, the testes of outbred Kunming strain mice were whole-body irradiated with 0, 0.05, 0.1, 0.5 and 1 Gy, respectively. We measured DNA double-strand breaks (DNA DSBs) and oxidative stress parameters including malondialdehyde (MDA) content, superoxide dismutase (SOD) activity, and testis weight and sperm count at 12 h, 21 d and 35 d after irradiation in mouse testis. At 12 h postirradiation, a significant increase in DNA DSB level but no pronounced alterations in MDA content or SOD activity were observed in 0.5 and 1 Gy groups compared with the control group. At 21 d postirradiation, there was a significant reduction in sperm count and distinct enhancements of DSB level and MDA content in 0.5 and 1 Gy groups in comparison with control. At 35 d postirradiation, the levels of DNA DSBs and MDA, and SOD activity returned to the baseline except for the MDA content in 1 Gy (P < 0.05), while extreme falls of sperm count were still observed in 0.5 (P < 0.01) and 1 Gy (P < 0.01) groups. For the 0.05 or 0.1 Gy group, no differences were found in DNA DSB level and MDA content between control and at 12 h, 21 d and 35 d after irradiation, indicating that lower doses of carbon ion irradiation have no significant influence on spermatogenesis processes. In this study, male germ cells irradiated with over 0.5 Gy of carbon ions are difficult to repair completely marked by the sperm count. Furthermore, these data suggest that the deleterious effects may be chronic or delayed in reproductive system after whole-body exposure to acute high-dose carbon ions.     

Geostationary orbit determination using SATRE

A new strategy of precise orbit determination (POD) for GEO (Geostationary Earth Orbit) satellite using SATRE (SAtellite Time and Ranging Equipment) is presented. Two observation modes are proposed and different channels of the same instruments are used to construct different observation modes, one mode receiving time signals from their own station and the other mode receiving time signals from each other for two stations called pairs of combined observations. Using data from such a tracking network in China, the results for both modes are compared. The precise orbit determination for the Sino-1 satellite using the data from 6 June 2005 to 13 June 2005 has been carried out in this work. The RMS (Root-Mean-Square) of observing residuals for 3-day solutions with the former mode is better than 9.1 cm. The RMS of observing residuals for 3-day solutions with the latter mode is better than 4.8 cm, much better than the former mode. Orbital overlapping (3-day orbit solution with 1-day orbit overlap) tests show that the RMS of the orbit difference for the former mode is 0.16 m in the radial direction, 0.53 m in the along-track direction, 0.97 m in the cross-track direction and 1.12 m in the 3-dimension position and the RMS of the orbit difference for the latter mode is 0.36 m in the radial direction, 0.89 m in the along-track direction, 1.18 m in the cross-track direction and 1.52 m in the 3-dimension position, almost the same as the former mode. All the experiments indicate that a meter-level accuracy of orbit determination for geostationary satellite is achievable.     

星载单频GPS数据的电离层延迟改正方法分析

利用C/A码单点定位对LEO(Low Earth Orbit)卫星上的电离层延迟改正方法——"电离层比例因子法"进行了分析研究.计算的CHAMP卫星的轨道结果表明:采用电子密度峰值高度(hmF2,F2 region maximum electron density height)平均值和瞬时值计算的电离层比例因子α变化范围分别为0.3~0.4和0.2~0.65之间,两者最大差异可达0.3,相比较而言,hmF2瞬时值的结果更加合理,并且相应的大地高H方向的系统偏差要降低0.05~0.3m左右;与双频无电离层组合的普通单点定位结果相比表明该方法能较好地消除电离层一阶项所引入的H方向上的系统偏差;该方法适用的LEO卫星轨道高度范围大致在200~ 600km之间,当轨道高度超过700km时,该方法并不适用.     

Lambert转移中途修正的全局概率最优策略

应用Monte-Carlo法和遗传算法的联合仿真求解Lambert转移中途修正的全局概率最优策略.首先推广限制性三体问题中求解周期性特解的微分修正算法构造出考虑J₂项摄动下的Lambert转移轨道并以此作为参考轨迹,则中途修正策略仅需针对导航误差、初始偏差修正的控制偏差等进行补偿.应用微分修正算法导出的单值矩阵,设计出3类线性和非线性中途修正策略,以适应不同的精度需要.随后应用Monte-Carlo和遗传算法的联合仿真,可以得到实现代价函数(落点误差最小)在概率意义下的最优解.与直接利用优化算法寻优需要已知各种误差量不同,得到的最优修正策略更具有普适性.     

200N·m·s控制力矩陀螺用圆柱型导电环寿命试验

导电环用于200N·m·s控制力矩陀螺高速转子电信号的传输,其使用寿命直接决定了200N·m·s控制力矩陀螺整机寿命,因此需要对200N·m·s控制力矩陀螺用导电环进行加速寿命试验.对试验目的、试验对象、加速因子、试验环境、试验系统组成、失效判据进行了详细描述,对导电环寿命试验期间的电噪声、摩擦力矩、绝缘性能等测试结果进行的分析表明,在进行了4×106转的寿命试验后,导电环的各项性能指标仍能够满足200N·m·s控制力矩陀螺的使用需求.     

封闭式行星轮系功率流判别的键合图法

为更简单清晰地对封闭式行星轮系的功率流情况进行判别,利用键合图能量守恒和功率流动的特点,将键合图理论应用于该类轮系的功率流分析中.以功率汇流型、回流型2种形式的封闭式行星轮系为例,根据轮系的传动关系,利用绝对速度法建立轮系的键合图模型,根据提出的功率流向判别依据对轮系进行功率流向判别,得到整个轮系及其转换机构的功率流情况,为轮系的效率计算提供了基础.该方法适用于其它复杂轮系的功率流判别中,比传统方法更具直观性、系统性.     

捻度对缝合线浸润特性的影响

研究不同捻度缝合线的浸润效果,通过SEM(扫描电子显微镜)观察不同捻度缝合线浸润树脂后的尺寸及其与树脂界面结合情况.研究结果表明:随着缝合线捻度的增加,树脂浸润缝合线的效果变差,缝合线纤维束及单丝与树脂结合情况变差;浸润树脂后的缝合线纤维束尺寸相对浸润之前提高,但随着捻度的增加,浸润树脂后的缝合线纤维束尺寸降低.