扫描辐射计内光路反射镜中SiO2／Ag薄膜系统的失效分析

SiO_2/Ag薄膜系统是扫描辐射计内光路反射镜的主要组成部分。采用高分辨扫描俄歇微探针(SAM)和扫描电镜分析对SiO_2/Ag 薄膜系统失效进行了较为全面的分析研究。通过扫描电镜观察发现,失效的反射镜表面SiO_2薄膜上存在大量析出物,借助于SAM分析,表明这些析出物主要是银和铜,析出物表面伴随有硫化和氧化。SAM的深度剖面结果说明,有析出物存在的区域,各薄膜层中存在原子间的扩散。文章就反射镜中Ag、Cu、和O的扩散和穿透行为进行了讨论,认为SiO_2薄膜致密度较差是导致反射镜失效的主要原因之一。     

Dayside reconnection during IMF northward: A possible foreshock effect

The northward and southward orientation of the interplanetary magnetic field (IMF) is usually considered as providing the external boundary conditions in the solar wind interaction with the Earth's magnetopause but it is the magnetic field in the magnetosheath that interacts with the Earth's magnetic field. In this paper, we consider the possibility that the wave activity in the foreshock region may affect the magnetic field orientation in the magnetosheath with time scales that might be geomagnetically effective. If magnetosheath magnetic field becomes disturbed on plasma streamlines which are connected to the quasi-parallel bow shock and foreshock, the magnetic field orientation on the inner magnetosheath may differ significantly from the undisturbed IMF. We present a model of dayside reconnection which may occur when the IMF northward and illustrate its effects on the erosion of the magnetopause.     

应用分力合成方法提高系统性能指标的研究

提出了将柔性结构的分力合成主动振动抑制方法和反馈控制律结合使用来提高柔性结构控制系统性能指标的方法。应用该方法仅需要知道闭环系统及柔性振动的频率及阻尼，而且可以同时抑制任意多个振动模态（包括控制器引起的振动，柔性振动及其他形式的振动），分力合成方法对频率及阻尼的不确定性具有较强的鲁棒性，使该方法易于工程实现，文章针对单柔性杆，将分力合成主动振动抑制方法和反馈控制相结合，设计了不同形式的大角度机动控制律，数值仿真和试验结果充分验证了方法的有效性。     

微结构谐振传感器

阐述了频率输出的新型谐振传感器的发展方向之一——微型化。评价性地论述了热激励硅谐振压力传感器和热激励谐振膜质量流量传感器。重点讨论了热激励的原理,特点等。指出我国应对传感器的这一发展趋势给予足够的重视。     

推力矢量和二元喷管

推力矢量是第四代战斗机获得过失速机动性的必要条件,而二元喷管又是推力矢量控制中性能较为优越的一类喷管。本文较全面地阐述了目前世界上推力矢量和二元喷管的发展和现况、二元喷管的构造和性能、二元喷管对改进飞机升阻特性和机动的作用。推力矢量能显著提高飞机在空战中的作战效率以及推力矢量控制所需的效能也在文中作了介绍。     

CNC数控系统控制软件

本文分析了数控机床控制系统,由硬件NC(Numerical Contro1)向CNC(ComputerNumerical Control)转变时进给速度下降的问题,阐述了解决此问题的一种方法——二次插补方法。指出CNC数控系统是个多重中断系统,论述了将数控的工作按其重要的程度、实时性的高低,安排在不同的优先级,使整个系统协调工作的思想。     

同无黑子耀斑相协的微波爆发机制的探讨

1980—1984年期间,我们在云南天文台9375MHz,3653MHz和2902 HHz三个波段的射电观测资料中,查到11组微波爆发与无黑子耀斑相伴随。本文研究了这些爆发与耀斑的大气层高度,射电爆发类型以及通过落进峰值流量-时间图的位置,确认出爆发机制是活动区中作麦克斯韦分布电子的热轫致辐射。     

多机并联火箭羽流流场及其底部热环境分析

For the problem that the plume flow field structure of a multi engine parallel rocket is complicated and the bottom thermal environment is extremely harsh, which may cause the failure of the engine structural components, the plume flow field and thermal environment at different altitudes are studied through numerical simulation. The result is compared with the measured results in flight which shows that when the rocket is flying at a low altitude, the plume of the engines do not interfere with each other. As the flight altitude increases, the plumes gradually expand and begin to interfere with each other, and finally there is an obvious backflow at the bottom of the rocket. The maximum heat flux at the moment of take off is basically the same as the measured value in flight. Before the backflow occurs, the heat flux mainly consists of radiant heat, the convective heat flow increases as the flight altitude grows, but it is also much smaller than the peak heat flow at takeoff. The result has certain guiding significance for the optimal design of engine structure thermal protection.     

High temporal resolution global PWV dataset of 2005–2016 by using a neural network approach to determine the mean temperature of the atmosphere

Atmospheric water vapour plays an important role in phenomena related to the global hydrologic cycle and climate change. However, the rapid temporal–spatial variation in global tropospheric water vapour has not been well investigated due to a lack of long-term, high-temporal-resolution precipitable water vapour (PWV). Accordingly, this study generates an hourly PWV dataset for 272 ground-based International Global Navigation Satellite System (GNSS) Service (IGS) stations over the period of 2005–2016 using the zenith troposphere delay (ZTD) derived from global-scale GNSS observation. The root mean square (RMS) of the hourly ZTD obtained from the IGS tropospheric product is approximately 4 mm. A fifth-generation reanalysis dataset of the European Centre for Medium-range Weather Forecasting (ECMWF ERA5) is used to obtain hourly surface temperature (T) and pressure (P), which are first validated with GNSS synoptic station data and radiosonde data, respectively. Then, T and P are used to calculate the water vapour-weighted atmospheric mean temperature (Tm) and zenith hydrostatic delay (ZHD), respectively. T and P at the GNSS stations are obtained via an interpolation in the horizontal and vertical directions using the grid-based ERA5 reanalysis dataset. Here, Tm is calculated using a neural network model, whereas ZHD is obtained using an empirical Saastamoinen model. The RMS values of T and P at the collocated 693 radiosonde stations are 1.6 K and 3.1 hPa, respectively. Therefore, the theoretical error of PWV caused by the errors in ZTD, T and P is on the order of approximately 2.1 mm. A practical comparison experiment is performed using 97 collocated radiosonde stations and 23 GNSS stations equipped with meteorological sensors. The RMS and bias of the hourly PWV dataset are 2.87/?0.16 and 2.45/0.55 mm, respectively, when compared with radiosonde and GNSS stations equipped with meteorological sensors. Additionally, preliminary analysis of the hourly PWV dataset during the EI Niño event of 2014–2016 further indicates the capability of monitoring the daily changes in atmospheric water vapour. This finding is interesting and significant for further climate research.     

Particle swarm optimization applied to hypersonic reentry trajectories

This paper presents the novel use of the particle swarm optimization(PSO)to generate the end-to-end trajectory for hypersonic reentry vehicles in a quite simple formulation.The velocitydependent bank angle profile is developed to reduce the search space of unknown parameters based on the constrained PSO algorithm.The path constraints are enforced by setting the fitness function to be infinite on condition that the particles violate the maximum allowable values.The PSO algorithm also provides a much easier means to satisfy the terminal conditions by adding penalty terms to the fitness function.Furthermore,the approximate reentry landing footprint is fast constructed by incorporating an interpolation model into the standardized bank angle profiles.Numerical simulations demonstrate that the PSO method is a feasible and flexible tool to generate the end-to-end trajectory and landing footprint for hypersonic reentry vehicles.