TC11 粉末钛合金的微观组织及其形成机理

通过旋转电极制粉及后续的热等静压工艺制备了全致密的TC11粉末钛合金,分析了材料的微观组织,通过理论分析和有限元模拟的方式探讨了材料独特的微观组织的形成机理.分析结果表明:粉末冶金TC11的微观组织主要由条片α+相间β相组成,同时还有部分细小的等轴α分布在粉末颗粒界面处.这种独特的微观组织是由两种工艺共同作用产生的.     

民用飞机翼面冰形的工程修正

翼面结冰是威胁飞行安全的重要因素之一。以数值模拟结冰为基础,进行了翼型结冰的工程修正方面的研究。运用结冰分析软件Sadrice,对不同状态下的不同翼型进行表面冰形数值模拟。结合结冰风洞试验结果,对影响冰形的参数进行了变参研究,得到了最有效的修正方法。对现有对流换热系数经验公式进行线性修正,使修正对流换热系数经验公式后的预测冰形和冰风洞试验结果之间能够较好地吻合,最终总结出了一套工程修正数值模拟冰形的方法。     

基于虚拟仪器的机载模块性能测试系统

针对传统机载设备侧重于功能测试的技术缺陷,提出了一种机载模块性能测试系统。阐述了测试系统的架构设计和基于LabVIEW的算法实现,使用虚拟仪器技术,实现了航空电子总线ARINC429模块中信号性能的自动测试和故障报告。实验结果表明,该系统能有效完成模块信号性能的自动测试与故障报告,提高了航空电子自动测试设备的通用性与可靠性,对未来两级维修体制下的航空电子设备ATE的发展具有一定的现实意义。     

先进教练机三维工艺设计平台架构研究

沦述了航空制造业中数字化工艺设计的发展现状,分析了在三维业务需求下．当前教练机工艺设计系统所存在的问题及技术差距,并在此基础上提出了基于先进教练机平台的三维工艺设计集成系统总体构架技术方案,阐述了三维工艺设计支撑环境的构建,构建了基于数字量传递的三维工艺设计过程模型及三维工艺集成平台系统软件总体应用架构,对三维工艺设计数据库也进行了说明。     

初级教练机综合航电系统发展趋势

分析和总结了综合航空电子系统的发展历史和现状,以及我国航电技术水平发展状态,阐述了当前初级教练机航电系统存在的问题。对国外军用初I中级教练机、国外民用轻型飞机和国产初级教练机现状进行了分析,论述了初级教练机综合航空电子系统的发展趋势。     

Prediction of transient responses of a folding wing during the morphing process

Accurate prediction of the structural dynamic characteristics of a folding wing during the morphing process is a prerequisite for performing transient aeroelastic analysis. In view of this fact, this paper develops a set of differential-algebraic equations that govern the time evolution of the folding wing during the morphing process by using the floating frame approach. Using the established equations of motion, the transient responses of the wing during the morphing process are computed. The developed equations can be further integrated with the CFD codes to carry out the transient aeroelastic analysis of the morphing wing.     

Research on failure criterion of composite based on unified macro- and micro-mechanical model

A new unified macro- and micro-mechanics failure analysis method for composite structures was developed in order to take the effects of composite micro structure into consideration. In this method, the macro stress distribution of composite structure was calculated by commercial finite element analysis software. According to the macro stress distribution, the damage point was searched and the micro-stress distribution was calculated by reformulated finite-volume direct averaging micromechanics (FVDAM), which was a multi-scale finite element method for composite. The micro structure failure modes were estimated with the failure strength of constituents. A unidirectional composite plate with a circular hole in the center under two kinds of loads was analyzed with the traditional macro-mechanical failure analysis method and the unified macro- and micro-mechanics failure analysis method. The results obtained by the two methods are consistent, which show this new method’s accuracy and efficiency.     

翼型加装格尼襟翼的低雷诺数气动特性实验研究

为了研究低雷诺数下格尼襟翼对翼型气动特性的影响,通过风洞试验研究了Eppler387翼型加装0.5%～5.0%弦长高度格尼襟翼后的气动特性变化,试验雷诺数1.49×105～2.31×105。试验结果表明：低雷诺数下Eppler387翼型加装格尼襟翼后,升力系数和力矩系数明显增大,襟翼高度大于2%弦长时阻力系数显著增大。格尼襟翼在高升力系数下能够起到增大升阻比的作用,适用于微小型飞行器工作在大载荷状态,而0.5%弦长高度的襟翼还能够兼顾中小升力系数下的气动效率,同样适合于微小型飞行器在巡航状态使用。与原翼型相比,加装襟翼后最大升阻比对应的迎角提前,随襟翼高度的增加,翼型升阻比曲线峰值变得不再突出。     

Investigation of longitudinal aerodynamic parameters identification method for fly-by-wire passenger airliners

The flight control system of a fly-by-wire （FBW） passenger airliner with a complex frame-work and high feedback gain augmentation would change the original characteristic of a loaded signal and suppress the excitation of an airplane＇s pertinent motion modes. Taking a research example of an FBW passenger airliner model with longitudinal relaxed-static-stability, a new method of signal type selection and signal parameter design is proposed, through analysis of signal energy distribution and plane body＇s frequency response. According to CCAR60--the Appraisal and Use Regulation of Flight Simulator Device, the simulation validation of the FBW passenger airliner＇s longitudinal aerodynamic parameters identification is put forward. The validation result indicates that the designed signal could excite the longitudinal motion mode of the FBW passenger airliner adequately and the multiparameter comparison in simulation meets the objective test request of CCAR60. Meanwhile, the relative errors of aerodynamic parameters are less than 10%.     

直升机吊挂飞行中载荷摆动控制方法研究

当直升机的吊挂载荷较大时,机体和吊挂相互耦合将会影响直升机的操纵性和稳定性。飞行员对直升机的操纵会引起吊挂载荷摆动,导致直升机产生剩余振荡,飞行员处理不当极易出现飞行员诱发振荡（PIO）现象。以某直升机为研究对象,通过一些假设简化直升机吊挂模型,提出一种面向工程应用的控制方法;以显模型跟随控制方法为基础架构,结合自适应控制和输入整形技术,对控制方法进行仿真分析。结果表明：该控制方法给飞行员提供了良好的操纵性,同时能够解决吊挂飞行时存在的剩余振荡问题。