引信天线参数设计中的概率方法

本文从引信的最一般概念出发给出了确定引信天线付瓣电平参数的概率解析法，论理严谨，经济适用，根据这种方法确定天线付瓣电平是建立在引信付瓣启动的小概率原理上的。适用于小型计算机计算。文中还给出了计算实例供设计参考。     

固体火箭发动机排气二次燃烧的抑制技术

介绍了无烟固体火箭推进剂研究的最新进展——固体火箭发动机排气二次燃烧的抑制技术,内容包括二次燃烧的产生机理、抑制机理和国外技术现状等.国外经验表明,采用少量的抑制剂可以达到对高能无烟推进剂发动机排气二次火焰的抑制.     

红外隐身材料的研究进展

红外探测器的高度发展已使用于目标表面的热红外隐身材料成为飞行器隐身技术中的一个重要组成部分。但对这种材料的发展情况,以往的文献一向较少涉及。本文概括了这种材料的一般性能要求,较全面地评述了十余年来红外隐身材料研究中各主要方面的发展情况,并分析了一些重要材料品种的特点、性能水平、技术影响因素、存在的问题和发展趋势。     

一类挠性航天器的变结构控制

本文研究在控制器能量受限条件下，一类挠性航天器的姿态控制问题。考虑刚性主体上带有挠性梁的航天器，并假定系统在一平面内作旋转运动。针对航天控制工程中执行机构的工作模式，基于系统的无穷维模型，本文设计了简单易行的变结构控制方案，并证明了相应的闭环系统的渐近稳定性。数值仿真和物理实验结果显示了所设计的控制算法的有效性。     

TDICCD相机数据采集与图像处理技术

研制了一种TDICCD相机实时图像采集和微机快视系统,文中介绍了该系统的3个模块:信号采集电路、图像存储和微机滚动显示部分。     

Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

国外对GAP／AN推进剂燃烧性能和感度的研究

介绍了国外对ＧＡＰ／ＡＮ复合燃烧性能研究的新进展，探讨了少量添加剂对ＧＡＰ／ＡＮ推进剂燃速特征的影响，评价了ＧＡＰ／ＡＮ推进剂的印感性能。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

近期商用单级入轨飞行器的可行性

讨论了单级入轨火箭推进飞行器,尤其是使用航天飞机外置贮箱和六个航天飞机主发动机的一次性使用飞行器的可靠性和发射费用。减小发动机质量将是方案改进的主要方面。如果低成本、小质量的主发动机研制成功,那么一次性使用 SSTO(单级入轨)飞行器将拥有商用发射前景,而且有利于可重复使用 SSTO 飞行器的研制。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.