角速率输入条件下圆锥误差补偿算法

针对捷联惯导系统中利用角速率拟合角增量进行圆锥误差补偿精度下降和实时性变差的问题,提出了一种直接利用陀螺的角速率输出进行圆锥误差补偿的算法,利用角速率的叉乘项来拟合圆锥误差补偿项,并推导了四子样圆锥误差补偿算法的具体表达形式,并从本质上阐述了圆锥误差的存在机理。在典型圆锥运动条件下通过对所提算法的仿真并和理论解析解的做差比较,验证了所提算法的可行性和有效性。     

基于增量模型的BTT导弹新型解耦补偿控制

详细分析了倾斜转弯(BTT, Bank-To-Turn)导弹传统动态逆控制的特点及其存在的问题,在此基础上提出了一种基于增量模型的BTT导弹解耦补偿控制方法.该方法通过建立一种描述从当前动态转移至期望动态的BTT导弹增量模型,消除了难以测量或不确定较大的模型部分;在此基础上结合动态逆控制思想设计了BTT导弹的增量式解耦跟踪控制律,与传统动态逆相比,该控制律对模型的依赖程度大幅降低;为进一步提高控制系统对干扰的适应性,提出了一种简单的干扰估计/补偿策略;最后通过数学仿真验证了该方法的有效性.     

地外二氧化碳转化利用技术研究现状与展望

为有效解决未来长期载人地外生存面临的物资供给等关键问题,获得更高的氧回收率、能量转化效率和更低的应用成本,亟须发展更高效的地外二氧化碳转化利用技术。文章总结了地外二氧化碳利用的发展现状并分析了近期的研究进展,发现不同技术之间差异大,在航天应用过程中,需充分考虑地外环境限制因素,以选用更合适的技术。空间站上已搭载的Sabatier装置和火星车上的MOXIE装置初步实现了地外二氧化碳还原。以“地外人工光合成”为代表的常温二氧化碳转化技术可为地外环控生保提供新路线。其不仅能够实现地外氧气供给,还可获得甲酸、乙烯和甲烷等有机分子作为燃料或生物转化原料。随着相关基础研究的不断发展,有望实现二氧化碳的高效转化和高附加值有机物、甚至碳糖食物的生产。地外二氧化碳转化利用技术的发展,将实现地外密闭环境下的废弃资源利用与物质循环,降低载人空间站、载人深空飞船的物资供应需求,也将为原位资源利用火星大气中的二氧化碳提供创新思路,以支撑未来可承受、可持续的地外生存任务。     

RTK model and positioning performance analysis using Galileo four-frequency observations

This paper proposes a real-time kinematic (RTK) model that uses one common reference satellite for the Galileo system with four frequency observations. In the proposed model, the double-differenced (DD) pseudorange and carrier phase biases among the different frequencies are estimated as unknown parameters to recover the integer features of the DD ambiguities among the different frequencies for ambiguity resolution and precise positioning. Analysis results show that the E5a, E5b, and E5 frequencies have virtually the same performance in terms of the positioning accuracy, observation residuals, and ratio values of ambiguity resolution. However, the E1 frequency performs worse than the E5a, E5b, and E5 frequencies. The RTK results for the combination of multiple frequencies are much better than those for a single-frequency observation, the coordinates’ standard deviation is improved about 20–30%, and the ambiguity fix time is improved about 10%.     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

Carrier phase prediction method for GNSS precise positioning in challenging environment

Since the signals of global navigation satellite system (GNSS) are blocked frequently in challenging environments, the discontinuous carrier phases seriously affect the application of GNSS precise positioning. To improve the carrier phase continuity, this paper proposes a carrier phase prediction method based on carrier open-loop tracking. In the open-loop tracking mode, the carrier numerically controlled oscillator (NCO) is controlled by the predicted Doppler, but not by the loop filter output. To improve the phase prediction effective time, accurate receiver clock drift estimation is studied in the prediction method. The phase prediction performance is tested on GNSS software receiver. In the phase prediction effective time tests, open-loop processes were set for the tested channel. The test results show that, when some satellite signals are blocked in 15?s, the probability of carrier phase error less than quarter cycles is more than 94%. In the real time kinematic (RTK) positioning tests, some satellite signals are blocked in 10–15?s repeatedly. The test results show that, the carrier phase continuity is basically not affected by the signal interruption, and the RTK can almost keep continuous centimeter-level positioning accuracy without re-fixing the integer ambiguity.     

面向重心变化的自适应飞行控制系统设计

重心的变化直接影响飞机本身的控制特性,使得控制系统设计更为复杂.针对已有方法模型依赖性强、鲁棒性差的局限性,提出了一种面向重心变化的非线性自适应飞行控制系统设计方法.该方法基于逆动力学理论和重心在线估计系统设计标称控制律,在此基础上引入自适应滑模控制单元来构建自适应补偿控制律,其中滑模控制用于保证控制的鲁棒性和稳定性,而自适应单元则通过对模型不确定性和重心估计误差的估计及补偿提高控制的适应性和控制性能.结合Lyapunov稳定性理论证明了闭环系统的稳定性.仿真结果表明:该方法能有效地实现对系统未知不确定因素的补偿,具有较强的鲁棒性.     

基于接触状态分析的叶冠阻尼评估与改进设计

采用基于接触状态分析的干摩擦阻尼结构设计方法,针对某型带冠涡轮叶片进行了阻尼评估与改进设计.接触状态包括接触形式和接触参数,通过接触形式从结构上判断结构设计的合理性;通过接触参数从力学性能上评价叶冠的阻尼效果.对叶片的动力特性、接触状态和振动响应进行综合评估分析,找出叶冠结构设计不足之处,并指出具体的改进措施,使叶冠的接触状态及振动响应得到一定的改善,并找到叶冠弦宽稳定工作范围.接触状态能够细致反映出叶冠工作状态下真实的接触情况,为叶冠结构设计和阻尼效果判定提供了更准确、详尽的参考依据.     

一种改进的基于双矢量观测的姿态确定算法

为了提高飞行器姿态确定的精度和姿态矩阵的解算速度,提出了一种改进的双矢量定姿算法.这种算法利用测量系统的方差对两个观测矢量进行加权处理,求得一个新的矢量,以两观测矢量夹角为判断依据选取加权系数;以新矢量为基准矢量,利用双矢量定姿算法求解姿态矩阵,并对求得的姿态矩阵进行修正.仿真结果表明:这种算法所需时间为优化算法的50%,当两个传感器测量误差不同、两矢量为任意夹角时,这种算法比优化的双矢量算法精度高;当两个传感器测量误差相同时,除了两矢量夹角为90°外,这种算法均比优化的双矢量算法精度高.     

新的导弹协同定位技术

导弹协同作战的关键技术之一是导弹的精确定位技术,针对在体系对抗条件下,如何提高导弹集群的导航定位精度问题,构建了以弹载数据链和惯导系统为核心的协同定位系统,提出了一种基于相互测距信息的导弹协同定位方法.该方法使用加权秩亏自由网平差的方法来估计导弹集群的惯导系统定位误差.仿真表明:该方法可以有效地延缓惯导位置误差的发散速度和提高惯导定位精度,随着导弹数量的增多,惯导定位精度不断提高,当导弹数量大于4时,惯导定位精度将提高2倍以上.