位置同步补偿克服负载模拟器干扰力矩及提高系统频宽的理论与实验研究

本文介绍一种通过位置同步补偿克服飞行器负载模拟器的干扰力矩及提高系统频宽的新方法。建立了位置同步补偿电液负载模拟器的数学模型，并进行了实验分析     

一种异步嵌入变格式遥测系统

介绍一种变格式异步嵌入式遥测系统，该系统能正确有效地传输飞行器导航计算机数据（块）及其他各种被测信号，重点分析了遥测数据帧格式的设计及突出特点     

基于车辆定位的北京公交智能调度指挥系统

介绍了先进的北京市公共交通智能调度指挥系统 ,包括其各个子系统。着重描述其中的公交车辆定位系统 ,该系统采用高精度的差分 GPS、无线数据传输和话音调度 ,利用已有的模拟集群通信系统 ,终端显示为先进的地理信息系统。整个系统将给调度员提供方便、直观、含位置及状态的全方位车辆信息 ,提高公共交通运营的效率     

液体火箭发动机滚动轴承故障诊断方法初探

轴承故障在回转机械的各种故障中占有很大比例,轴承故障的诊断和检测是机械故障诊断重点发展的技术之一。本文结合发动机滚动轴承使用情况,介绍了液体火箭发动机滚动轴承故障诊断的作用、工作过程、诊断与检测方法。     

星载遥感图像压缩编码技术综述

星载遥感图像压缩是星载遥感技术的瓶颈之一。文中简要分析遥感图像压缩的现状、基本要求和核心技术 ,并着重讨论三种优秀遥感图像压缩算法。最后提出对未来遥感图像编码的研究建议     

TC4钛合金激光焊中工艺参数对气孔生成量的影响

文摘研究了TC4钛合金激光焊接在平焊、横焊两种位置下工艺参数对气孔生成量的影响。结果表明:平焊时,气孔生成量随激光功率、离焦量的增大先减小后增大,随焊接速度的增大先增大后减小;横焊时,气孔生成量随激光功率的增大而增大,随焊接速度的增大而减小,随离焦量的增大先减小后增大。利用正交试验方法得到的优化工艺参数进行焊接,气孔生成量大幅减少,在两种位置下均可得到内部质量良好的焊缝。     

民用飞机燃油箱系统闪电防护分析方法研究

民机燃油箱系统的闪电防护是燃油箱安全的重要研究范畴,本文依据FAA的25-146号修正案和咨询通告AC25.954-1,介绍了民用飞机燃油箱系统闪电防护分析方法。在点火源防护分析思路的基础上,针对闪电引起的点火源,在明确飞机闪电分区后,可通过容错类设计或非容错类设计分别开展分析。针对容错类设计,可仅通过证明防护设计特征有效且可靠来表明符合性,无需进一步分析失效概率。针对非容错类设计,通过定性和定量分析法进行评估。在定性分析时,需评估非容错特征失效且引起点火源的概率小于1E-5。在定量分析中,可结合燃油箱可燃性、关键闪电和防护特征失效概率确保闪电引起燃油蒸气点燃的概率为极不可能。同时,根据闪电环境定义的电流振幅和波形对防护设计特征进行有效性验证。     

Eliminating negative VTEC in global ionosphere maps using inequality-constrained least squares

Currently, ground-based Global Navigation Satellite System (GNSS) stations of the International GNSS Service (IGS) are distributed unevenly around the world. Most of them are located on the mainland, while only a small part of them are scattered on some islands in the oceans. As a consequence, many unreasonable zero values (in fact negative values) appear in Vertical Total Electron Content (VTEC) of European Space Agency (ESA) and Center for Orbit Determination in Europe (CODE) IONEX products, especially in 2008 and 2009 when the solar activities were rather quiet. To improve this situation, we directly implement non-negative physical constraints of ionosphere for global ionosphere maps (GIM) with spherical harmonic functions. Mathematically, we propose an inequality-constrained least squares method by imposing non-negative inequality constraints in the areas where negative VTEC values may occur to reconstruct GIM models. We then apply the new method to process the IGS data in 2008. The results have shown that the new algorithm efficiently eliminates the unwanted behavior of negative VTEC values, which could otherwise often be seen in the current CODE and ESA GIM products in both middle and high latitude areas of the Southern Hemisphere (45°S∼90°S) and the Northern Hemisphere (50°N∼90°N). About 64% of GPS receivers’ DCBs have been significantly improved. Finally, we compare the GIM results between with and without the inequality constraints, which has clearly shown that the GIM result with inequality constraints is significantly better than that without the inequality constraints. The inequality-constrained GIM result is also highly consistent with the final IGS products in terms of root mean squared (RMS) and mean VTEC.