Solar flare forecasting model supported with artificial neural network techniques

Nowadays operational models for solar activity forecasting are still based on the statistical relationship between solar activity and solar magnetic field evolution. In order to set up this relationship, many parameters have been proposed to be the measures. Conventional measures are based on the sunspot group classification which provides limited information from sunspots. For this reason, new measures based on solar magnetic field observations are proposed and a solar flare forecasting model supported with an artificial neural network is introduced. This model is equivalent to a person with a long period of solar flare forecasting experience.     

复合材料层板纯剪实验

本文提出一个测量复合材料层板面内剪切性质的方板纯剪试验法。首先对方法的可靠性进行试验检验,然后对两种复合材料层板的剪切行为进行试验。     

焊接残余应力盲孔测量精度的三维模拟

基于三维有限元分析方法,研究了应变释放系数与孔深、主应力和应变花方向夹角以及双轴比之间的关系.采用三维有限元方法对应变释放系数进行了修正,并通过修正系数对焊接残余应力进行了修正,修正后的残余应力分布更趋于合理.     

导弹动力系统最佳预防维修周期的数字仿真

导弹武器系统中有很多是多次使用的可修复杂系统。对于这种复杂系统，尤其是其寿命周期，预防维修时间及事后维修时间为离散分布时，其最佳预防维修周期难以用一般方法求得。针对这种情况，本文利用蒙特卡罗随机模拟法建立了系统计算模型，并通过模拟计算，得出了最佳预防维修周期的数字仿真结果。此结果可为制定导弹武器最佳修复策略提供依据。     

航天运输系统中软件复杂性度量与控制

用软件度量学的方法来科学地评估软件质量,能够更有力地对软件开发过程进行控制和管理,合理地组织和分配资源,制定切实可靠的软件开发计划,从而获得高质量的软件.     

基于主成分的编队级网络对抗效能评估指标体系

分析建立编队级网络对抗评估指标体系的原则,用主成分分析法对指标进行处理,求得7个主成分.根据正交原则将20个指标分配到7个主成分中,赋予每个主成分以实际含义,最终建立了编队级网络对抗效能评估指标体系.     

Aeronautical use of semiconductor lasers for short optical pulses

In this paper, we investigate the feasible schemes to generate periodic optical pulses of width between several picoseconds (ps) and tens ps. Gain-switched semiconductor laser diodes are shown to be more suitable for avionics applications than mode-locked laser diodes. In the experiment, we use a low-cost Fabry-Perot laser diode to generate short optical pulse streams. A simple optical injection-locking scheme is then used to reduce the timing jitter and frequency chirp in such laser diodes, which in turn can improve the transmission performance of the generated optical pulses. It is expected that the use of gain-switched semiconductor lasers can meet the requirement of high-speed airborne communication networks or ground supporting systems at airports. Moreover, we discuss the possibility of using the pulsed semiconductor lasers to generate millimetre-wave (mm-wave) signals for future applications to airborne high-resolution, mm-wave radars.     

M数缩尺法旋翼颤振动力相似模型设计

本文以延-2复合材料桨叶旋翼为例,用M数缩尺法尝试设计了缩尺比为1/5的颤振相似模型。设计从旋翼颤振微分方程开始,应用π定理得出10个独立相似准则数,列出各有关物理量缩尺因子后进行模型结构设计,从而得出了若干有益的结论。     

如何从"无为"到"无不为"--老子"道"的伦理精神探微

《老子》书文约义丰,曲折难懂。其“无为无不为”更是只能心知其意。笔者试图对从“无为”到“无不为”中间的逻辑环节作一个解读——把二者连接起来的是其中存在着一种成长性希冀,在中国传统文化中则体现为一种务虚精神,并且深深地影响到了中国人对生命和人的认识。     

Investigation of the infrared characteristics of the rocket nozzle

Investigation of the infrared characteristics of a rocket nozzle is very important for the study of infrared initiating technology. The Narrow-Band Zone model is developed for that purpose. The spectral transmission and absorption factors are introduced, and the equations between radiative heat flux and the temperature of waill surfaces and gas are developed. The radiative heat transfer in one axisymmetric cylindrical enclosure filled with homogeneous radiative participating medium is computed with the Narrow-Band Zone model and compared with those in the reference documents. The comparison shows good agreement. The radiative heat transfer to the nozzle of one rocket engine is also calculated with the Narrow-Band Zone model, and the outgoing radiative energy flux and energy rate integrated in a mid-wave infrared band 2-6 pm, a long-wave infrared band 8-14 pm and the full wave band are analyzed. The following conclusions can be derived: the spectral radiation from the inlet and outlet of the nozzle show apparent spectral discontinuity, which appears greater in the 2.7-2.95 pm than in the neighboring wave band. The spectral outgoing radiative energy flux of nozzle wail is similar to that of gray body, which decreases with wavelength in 2-14 pm. The outgoing radiative energy flux on the nozzle wall is greater in the cylindrical and contracting section of nozzle, but smaller in the divergent section, which is determined by temperature. The nozzle of the rocket engine radiates most energy in the mid-wave surfaces by absorption. The most important feature of gas radiation is the strong selection of the waveband, so the detailed study of the infrared characteristics of nozzle of the rocket engine should be carried out on narrow-band computation.