航天器热控系统中的热泵-蓄冷组合方案

提出了旨在降低热控系统质量的热泵-蓄冷组合热控方案。通过对负荷进行预测，对热泵蓄冷系统的集成模式，系统的运行策略，以及蓄冷设备的容量等问题进行了分析。结果表明：通过合理优化系统的运行参数，热泵蓄冷组合方案能实现热控系统的轻量化设计要求，在未来航天热管理系统中具有相当的应用潜力。     

卫星液体晃动气浮台仿真试验系统的运动分析

本文通过边界元数值法求解了部分充液自旋球腔内的液体晃动问题。以流体运动的基本方程和系统运动的Ｅｕｌｅｒ动力学方程为基础，考虑了贮箱偏置、涡旋、重力及Ｃｏｒｉｏｌｉｓ力等因素对流体晃动和系统运动状态的影响，求解出液体的速度场，并在此基础上估算液体的能量耗散率和系统的章动时间常数     

从图像信息容量和图像功率谱看 CBERS-1卫星图像

文章从信息容量和图像功率谱这两个方面评价了CBERS-1的图像质量。并通过将同一地区的CBERS-1图像和TM图像进行比较,客现反映了CBERS-1卫星的图像质量。实验结果表明CBERS-1图像在信息丰富程度和图像综合的纹理特征上与TM图像质量相当,具有很好的可比性。     

二十一世纪的纳米技术

论述纳米技术将引发21世纪的一次产业革命.     

Simulation study on slant-to-vertical deviation in two dimensional TEC mapping over the ionosphere equatorial anomaly

With the rapid increase of GPS/GNSS receivers being deployed and operated in China, real-time GPS data from nearly a thousand sites are available at the National Center for Space Weather, China Meteorology Administration. However, it is challenging to generate a high-quality regional total electron content (TEC) map with the traditional two-dimensional (2-D) retrieval scheme because a large horizontal gradient has been reported over east–south Asia due to the northern equatorial ionization anomaly. We developed an Ionosphere Data Assimilation Analysis System (IDAAS), which is described in this study, using an International Reference Ionosphere (IRI) model as the background and applying a Kalman filter for updated observations. The IDAAS can reconstruct a three-dimensional ionosphere with the GPS slant TEC. The inverse slant TEC correlates well with observations both for GPS sites involved in the reconstruction and sites that are not involved. Based on the IDAAS, simulations were performed to investigate the deviation relative to the slant-to-vertical conversion (STV). The results indicate that the relative deviation induced by slant-to-vertical conversion may be significant in certain instances, and the deviation varies from 0% to 40% when the elevation decreases from 90° to 15°, while the relative IDAAS deviation is much smaller and varies from −5% to 15% without an elevation dependence. Compared with ‘true TEC’ map derived from the model, there is large difference in STV TEC map but no obvious discrepancy in IDAAS map. Generally, the IDAAS TEC map is much closer to the “true TEC” than is STV TEC map is.     

Solar-photon sail hovering orbits about single and binary asteroids

Solar-photon sails can be useful for missions towards and about asteroids. Indeed, for the interplanetary transfer phase, missions to asteroids often require a large variation in inclination and solar-photon sails perform very well for such high energy missions. In the same way, solar-photon sails are also expected to perform well in the phase about the asteroid. This paper studies single and binary asteroids’ hovering regions by using a sailcraft. In order to consider a sailcraft with its own mass and shape, the mutual polyhedral method (usually used to study asteroid dynamics) is used; therefore, the sailcraft is designed by means of tetrahedra. The procedure to obtain the hovering regions about a single asteroid is presented and an accurate analysis of the control variables is carried out. Moreover, control torques required to maintain hovering orbits are obtained by considering the gravitational torques acting on the sailcraft due to the asteroid. In the end, the theory for hovering orbits is extended to binary-asteroid systems and applied to the binary system 1999 KW4.     

K8飞机襟翼装配工艺的改进

Ｋ８飞机襟翼装配长期达不到设计要求，成为技术关键。本文从多方面分析了产生问题的原因，并详细介绍了改进方法及其效果。     

EW射频隐身系统频率选择表面电磁散射参数的测量

频率选择表面(FSS)技术为电子战射频隐身提供了新的实现技术途径,散射参数的测量验证是射频隐身系统FSS设计的关键环节.针对非理想测量环境,以一种小型化带阻频率选择表面为例,提出了一套频率选择表面散射参数的测量和校准方法,有效消除了测量中信号的衰减、测量天线间的耦合以及信号多径传播等对真实结果造成的影响,使之尽可能接近在理想环境中的测试结果.该方法极大改善了周期性人工电磁结构散射参数测量对环境的依赖,降低了射频隐身FSS设计的研发成本,在电子战领域具有良好的应用前景.     

提高UV-LIGA制备金微细零件的尺寸精度研究(英文)

在众多影响UV-LIGA(Ultra-violet lithography Galvanik abformung)技术制备微细金属零件尺寸精度的因素中,SU-8胶溶胀性是最主要的。通常采用隔离带方法降低SU-8胶的溶胀性,以提高电铸微细零件的尺寸精度。由于贵重金属会沉积到隔离带内,造成了贵重金属的浪费,增加制造成本,因此该方法不适合贵重金属微细零件制造。针对隔离带方法的弊端,提出了半隔离带方法,在保证电铸微细金属零件尺寸精度的前提下,避免了贵重金属的浪费。另外,还采用电解液喷射方法实现了高电流密度电铸,缩短了电铸时间,进一步提高了电铸微细金属零件的尺寸精度。试验结果表明:采用半隔离带方法和高电流密度,可以有效提高金微细零件的尺寸精度,当电流密度提高到0.6A/dm2,金微细零件的尺寸精度可以达到5μm。