FC-AE-1553网络传输性能评价

为了提高航天航空网络传输性能,提出一种通用的FC-AE-1553网络传输效率计算方法并研制高性能FC-AE-1553节点卡.首先,对FC-AE-1553网络的消息传输过程进行详细分析,分析信息类型,给出传输帧的格式建议,通过分析FC-AE-1553协议中各类消息传输的时间参数,结合FC标准中对通信时间的要求,提出FC-AE-1553网络交换中各种消息类型的通信时间计算公式.然后, 针对无差错传输和有差错传输两种情况,给出了网络传输效率的计算方法.最后,通过仿真分析数据帧净荷长度、节点处理时间、交换中序列数量、传输误码率、丢包率等参数对FC-AE-1553网络传输效率的影响,给出了网络优化设计的建议.依托某航天工程任务,研制了基于XC5VFX100T和MPC8536E的FC-AE-1553节点卡.实验结果表明:丢包对传输效率的影响可忽略;数据帧净荷为2 048 B,数据帧数量为16时,传输效率可达到77.2%.      

基于边缘信息的灰度目标跟踪算法

提出了一种基于边缘信息的跟踪算法,其可以实现对剧烈变化的灰度目标的精确跟踪.首先,利用基于双同心圆窗口算子的非线性边缘检测算法得到高质量的边缘信息;其次,为了解决单一边缘特征空间不能充分表征目标的难题,提出了一种通过组合边缘图像构建特征空间的方法,以便为目标建模提供充分信息;再次,在构建的特征空间中使用核估计方法对目标进行建模;在目标定位阶段,利用Kalman滤波器对目标进行预估后,再由Mean Shift算法在预估位置邻近区域实现目标定位;最后,提出了一种基于形态学的动态模型更新策略,使得算法不仅可以获得精确的目标区域,还可以实现对目标尺寸和形状变化的自适应.实验结果表明,本算法不仅可以有效跟踪剧烈变化的灰度目标,而且跟踪窗口可以实现对目标尺寸和形状的自适应.      

辅助空间遥操作的虚拟管道设计与实现

针对复杂空间环境下进行遥操作的安全性问题,提出一种基于路径点的光滑虚拟管道快速生成算法,改进深度优先算法对虚拟管道进行静态规划,并给出动态修正算法,实现管道的动、静态避障。虚拟管道可为操作者提供视觉、触觉等反馈信息以调整自身操作。操作对象在管道内运动,能安全、快速地达到目标。相对于路径规划方式按指定轨迹避障,该方法提高了操作灵活性和效率。在CHAI 3D仿真平台下进行多组避障实验,验证了算法的有效性。     

球铰接杆式支撑臂展开过程中横向振动分析

针对展开过程中球铰接杆式支撑臂时变构型的横向振动问题,推导了支撑臂等效连续体模型的各向等效刚度,基于Hamilton原理推导了支撑臂展开过程的控制方程,采用加权余量法将偏微分控制方程转化为常微分方程,利用Runge Kutta法对方程进行了数值求解。计算结果表明：在收拢过程中,支撑臂末端的横向振幅越来越小,收拢过程是安全可靠的;而在展开过程中,末端的横向振幅随展开进程而增加,且振幅随末端负载质量增加而增加;若不考虑锁定冲击,展开速度对支撑臂横向振动的振幅影响可忽略,若考虑锁定带来的周期性冲击时,支撑臂的横向振幅将显著增大。为减小支撑臂的横向振动,必须对支撑臂展开速度加以限制。研究结果为航天器支撑臂在轨展开的控制提供了参考。     

柔性绳网动力学建模与天地差异性分析

采用有限元模型研究了柔性绳网系统的动力学特性。针对空间绳网直接弹射展开方式,首先将绳网离散为若干单元,各单元处理为非线性“半阻尼弹簧”模型,然后分别计算各单元所受气动力和重力,最终建立绳网系统多柔体动力学模型。基于所建立的动力学模型分别对柔性绳网在地面和太空展开的动力学过程进行了仿真分析,研究了绳网在展开面积、空间位形和飞行距离等方面的天地差异性及其动力学机理,为未来空间绳网系统的分析设计提供理论参考。     

交会对接绕飞段临界安全轨迹研究

以Hill方程为基础对圆轨道近距离双脉冲绕飞安全策略进行研究.首先给出双脉冲绕飞的模型,通过仿真遍历得到不会进入球形安全区的绕飞轨迹,然后绘制出这些安全的绕飞轨迹所对应的绕飞时间、燃料消耗、追踪器与目标器的初始距离三个量之间的关系曲面,进而得到临界安全条件下的关系曲线并拟合出关系表达式,最后对拟合误差进行分析发现导致轨迹偏离的程度很小.     

基于距离测量的机器人误差标定及参数选定

为消除机器人运动学标定中的模型奇异问题,研究距离平方差模型的可辨识参数.采用修正DH（Denavit-Hartenberg）模型描述机器人连杆结构,六参数描述末端关节到工具坐标系的变换,推导了连杆参数误差到机器人末端距离平方差的线性模型,从冗余关系式和物理解释角度讨论冗余参数,确定可辨识参数,使用迭代的最小二乘法辨识参数完整且非奇异的模型.结合某6旋转关节机器人,以激光跟踪仪为测量仪器进行标定实验,在设计末端执行器时目标测量点偏离末端关节轴线以保证倒数第二关节参数的辨识.结果显示,距离平方差模型避免了测量坐标系到基坐标系的转换,检验点的距离误差均方根降低93.1%,完整性和非奇异性提高了参数辨识的有效性.      

Assessment of precision in ionospheric electron density profiles retrieved by GPS radio occultations

The Constellation Observing System for Meteorology Ionosphere and Climate (COSMIC) is a six satellite radio occultation mission that was launched in April 2006. The close proximity of these satellites during some months after launch provides a unique opportunity to evaluate the precision of Global Positioning System (GPS) radio occultation (RO) retrievals of ionospheric electron density from nearly collocated and simultaneous observations. RO data from 30 consecutive days during July and August 2006 are divided into ten groups in terms of daytime or nighttime and latitude. In all cases, the best precision values (about 1%) are found at the F peak height and they slightly degrade upwards. For all daytime groups, it is seen that electron density profiles above about 120 km height exhibit a substantial improvement in precision. Nighttime groups are rather diverse: in particular, the precision becomes better than 10% above different levels between 120 and 200 km height. Our overall results show that up to 100–200 km (depending on each group), the uncertainty associated with the precision is in the order of the measured electron density values. Even worse, the retrieved values tend sometimes to be negative. Although we cannot rely directly on electron density values at these altitudes, the shape of the profiles could be indicative of some ionospheric features (e.g. waves and sporadic E layers). Above 200 km, the profiles of precision are qualitatively quite independent from daytime or latitude. From all the nearly collocated pairs studied, only 49 exhibited a difference between line of sight angles of both RO at the F peak height larger than 10°. After analyzing them we find no clear indications of a significant representativeness error in electron density profiles due to the spherical assumption above 120 km height. Differences in precision between setting and rising GPS RO may be attributed to the modification of the processing algorithms applied to rising cases during the initial period of the COSMIC mission.     

Investigation of ionospheric response to two moderate geomagnetic storms using GPS–TEC measurements in the South American and African sectors during the ascending phase of solar cycle 24

The responses of the ionospheric F region using GPS–TEC measurements during two moderate geomagnetic storms at equatorial, low-, and mid-latitude regions over the South American and African sectors in May 2010, during the ascending phase of solar cycle 24, are investigated. The first moderate geomagnetic storm studied reached a minimum Dst value of −64 nT at 1500 UT on 02 May 2010 and the second moderate geomagnetic storm reached a minimum Dst value of −85 nT at 1400 UT on 29 May 2010. In this paper, we present vertical total electron content (VTEC) and phase fluctuations (in TECU/min) from Global Positioning System (GPS) observations from the equatorial to mid-latitude regions in the South American and African sectors. Our results obtained during these two moderate geomagnetic storms from both sectors show significant positive ionospheric storms during daytime hours at the equatorial, low-, and mid-latitude regions during the main and recovery phases of the storms. The thermospheric wind circulation change towards the equator is a strong indicator that suggests an important mechanism is responsible for these positive phases at these regions. A pre-storm event that was observed in the African sector from low- to the mid-latitude regions on 01 May 2010 was absent in the South American sector. This study also showed that there was no generation or suppression of ionospheric irregularities by storm events. Therefore, knowledge about the suppression and generation of ionospheric irregularities during moderate geomagnetic storms is still unclear.     

嵌入式软件测试开发环境的框架设计

采用软件设计上的复用思想,对嵌入式软件仿真测试环境进行框架的设计,可以使测试环境在不做大幅度修改的情况下适应不同的被测软件,节省设计的时间和费用.论述了由框架开发软件的过程,并把此过程应用于测试环境;对嵌入式软件仿真测试环境进行总体分析,确定了它的3个主要组成部分;归纳出作为测试环境重要组成部分的测试开发环境的基本功能,并使用专门针对框架开发的UML-F建模语言设计了一个框架;对已开发成功的测试开发环境框架,提出了具体的框架适配方案.本设计已在实际工程中得到了应用.