星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

基于MEMS的微槽冷却系统在微纳卫星热控中的应用

介绍了基于微机电一体化系统(MEMS)的微槽冷却系统的研究成果。分析了将微槽冷却系统用于微纳卫星热控设计时的特殊要求。讨论了表征微槽冷却系统性能的水力学系统和传热性能。理论分析和数值模拟结果表明,微槽冷却系统可使大热流密度的热源芯片温度维持在较低的范围内,能满足微纳卫星热控的要求。研究认为,压降和热阻均较小的深槽可在小泵功率时提供较优的传热性能。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

低温推进剂液体火箭发动机超导电磁泵压循环系统初步设想

为解决大型液体火箭发动机现有循环系统性能和技术难度及成本之间的矛盾，本研究基于低温推进剂液体火箭发动机工作环境特点，并结合磁流体发电机和直流超导电机的原理和工作特性，提出了一种不同于涡轮泵循环的超导电磁泵压循环系统。文中阐述了系统中超导电磁泵和磁流体发电装置的基本结构与工作原理，分析了系统的优缺点，并对超导电磁泵压循环系统进行了初步的可行性论证，最后对超导电磁泵压循环系统的应用前景进行了分析和论述。结论认为．作为一种全新的火箭发动机循环系统，超导电磁泵压循环系统具有非常广阔的发展及应用前景。     

具有容错性的自重构机器人变形原理

自重构机器人通过自主变形来适应环境和任务的需要，它具有低成本、多样性、自修理和容错性等特点。本文针对系统的容错性目标，深入研究了具有容错性的自重构机器人的自组织变形方法。首先建立能够表达失效模块信息的系统结构描述模型；然后建立自重构机器人的模块运动规则；提出可以实现容错性的自组织变形算法。在系统出现失效模块的情况下，机器人依然能够有效完成指定的任务。本文以平面正方形晶格机器人翻越障碍物为例对变形原理和算法进行了验证和仿真。     

基于FrFT优化窗的STFT及非线性调频信号瞬时频率估计

瞬时频率(IF)是描述非平稳调频信号最基本的参数,调频信号广泛应用于声纳、雷达、通讯和生物等领域。本文采用分数阶Fourier变换来优化STFT的窗函数,并估计非线性调频信号的瞬时频率。进行了详细的误差理论分析。同时在实验上和Wingner分布(WVD)、短时Fourier变换(STFT)进行误差(MSE)比较分析。仿真证明,FrFt优化窗STFT对估计非线性调频信号的瞬时频率具有良好的性能。     

一种新型环氧树脂体系的固化动力学及耐热性研究

通过不同升温速率下DSC研究了E51环氧树脂与DIA芳香胺固化体系的固化工艺、固化交联反应动力学参数及树脂体系的耐热性,利用FTIR方法计算了体系的固化度。通过分析确定了树脂的固化工艺,采用Kissinger、Ozawa法计算出树脂表观活化能,其均值为87.02kJ/mol,结合Crane公式求出反应级数为0.93。采用扭辫法测得玻璃化转变温度Tg=178℃。热失重曲线表明,体系的起始分解温度为364℃。