固体火箭发动机试验故障分析

从工程研制角度出发，探讨了分析固体火箭发动机试验失败原因的一般方法和过程，根据某发动机试验故障的具体情况，运用这种试验故障分析方法和过程（即针对试验故障进行故障树分析，设计复审分析，数据曲线的复核复算分析和验证试验），找出造成发动机试验故障的具体原因，确定故障机理；而后针对性地采取综合技术措施，并对这些措施进行试验验证，故障归零。     

遥感卫星CCD相机光学系统的热补偿设计

文章对遥感卫星CCD相机光学系统的热补偿设计进行了论述。     

基于Infineon CAN器件的总线通信速率侦测方法

本文论述了采用Infineon(sIEMENS)CAN器件侦测CAN总线通信Baudrate的两种方法。在未知现场运行CAN系统参数的情况下，采用所述方法可使未初始化的新的CAN节点接人CAN系统，而不影响现有CAN系统的运行。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

战术弹道导弹中段多弹头进攻方法的研究

由于弹道导弹防御技术的不断发展完善，没有突防手段的战术弹道导弹进攻的成功概率正在不断下降。本文利用零射程线给出了一种在中段初始阶段使用的多弹头突防手段，并进行了理论证明和仿真验证。这种方法不仅工程实现简单，而且在对抗过程中十分有效。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

基于AT89C52的离散信号测量电路设计

介绍了离散信号测量与控制在反舰导弹雷达导引头自动测控系统中的重要性 ,给出了基于AT89C5 2单片机控制的离散信号测量电路的具体构成和工作原理     

一种新的四路激光跟踪坐标测量系统的基点标定方法

在激光跟踪三维坐标测量系统中,系统首先要经过标定,才可以进行实际测量。因此系统标定的准确度会直接影响系统最终测量准确度。为了提高标定准确度,提出一种新的标定方法,即利用直线法原理,在优化布局下,采用两路激光干涉仪测量出基点的三维坐标。仿真结果表明目标点相对于基点呈对称分布时,测得的基点坐标准确度比非对称分布时高6到7倍,并通过实验得出了在该优化布局下的基点坐标。     

斜楔式扭转振动器原理研究

为了解决扭转振动攻丝系统体积大、成本高、使用寿命短等关键问题,使攻丝力矩明显减小的振动攻丝技术能够得到广泛应用,提出了一种结构紧凑、压力角小、具有对称结构、制造工艺简单的斜楔式扭转振动器的传动原理,导出了该振动器的输出运动方程所要满足的必要条件,并给出了输入输出构件凸轮廓线的一般方程.最后通过一个例子证实了方程的正确性.这种扭转振动器可以广泛地应用于振动攻丝、振动铰孔加工.