热氧、湿热和热水老化对T300/ BHEP 复合材料玻璃化转变温度的影响

通过对碳纤维/环氧复合材料(T300/BHEP)进行热氧、湿热和热水老化研究,得到了材料的质量变化率和Tg随老化条件的演变规律,分析了老化机理.结果表明:T300/BHEP复合材料在热氧老化条件下,因后固化和自由体积收缩,Tg升高;在湿热和热水老化条件下,因水分塑化作用和水对分子链间氢键的破坏,Tg降低.三种老化条件下,Tg与质量变化率均呈线性关系.对比80℃热氧、80℃/RH75%湿热和80℃热水老化条件下的结果,发现水分的塑化作用对Tg的影响要大于因热的作用产生的后固化,且湿度越大,Tg降低越明显.     

量子科学实验卫星微振动地面测试与估计方法

介绍了卫星微振动地面测试和信号估计方法.根据量子科学实验卫星特点,对动量轮运行状态下光学载荷的微振动线位移及角位移进行估计.通过地面微振动测试系统,测量了动量轮运行下光学载荷的微振动加速度;应用小波积分方法,精确估计了卫星结构敏感点的振动线位移和振动角位移.通过工程实测证明了微振动测试与估计方法的有效性.研究结果对于高精度科学实验卫星微振动地面试验具有一定工程应用意义.

     

利用人工神经网络快速计算木星系磁坐标

在木星辐射带研究中,从地理坐标向磁坐标的准确转换是建模基础.以往的建模中,磁壳参数L值的计算基于磁偶极场假设,该方法精确度较差.结合最新的高精度木星磁场模型JRM09,本文提出基于磁力线追踪法的木星磁坐标计算方法,并分析其合理性和必要性.要求精确度较高时,磁力线追踪法计算耗时很长.本文在磁力线追踪法的基础上进行改进,提出基于人工神经网络的磁坐标快速计算方法.该方法包括分类器和拟合器.分类器基于Adaboost算法的BP神经网络,用于预测某地理坐标是否在内磁层,如果在内磁层,则用拟合器计算L值.拟合器采用遗传算法优化BP神经网络.结果表明,分类器的分类错误率在3%以内,而拟合器的预测误差在7%以内.以Juno号一圈探测轨道为例,利用神经网络的磁坐标计算法比磁力线追踪计算法速度快3个数量级以上.基于人工神经网络的磁坐标快速计算方法可用于未来木星辐射带的研究.     

月球立方星姿态控制系统的初步设计与测试

立方星是一种模块化的微小卫星,在科学探测与专业人才培养等方面具有重要意义。针对目前立方星任务逐渐从近地轨道向深空扩展的发展趋势,以立方星月球深空任务为背景,利用商业器件设计并实现了初步的立方星姿态控制系统,以及姿态控制系统所必需的结构、电源、计算机等立方星子系统,同时给出了姿态测试平台的设计方案及其硬件实现。在所搭建硬件平台上,通过测量飞轮控制器的阻尼系数,对控制模型进行参数辨识与标定,获得了与数值仿真一致的实物测试结果。针对姿态控制系统设计了PD控制律,并在控制实验中实现了至任意姿态角的机动控制。     

环喉型塞式喷管的数值仿真研究

通过流场数值仿真计算方法对环喉型塞式喷管进行了研究,对比计算了不同外流条件下塞式喷管的流场结构和性能.分析表明该塞式喷管的结构方案独特,具有稳定的高空高速性能,与传统的钟型喷管相比低空性能更优异.     

The Earth's Magnetosphere Response to Solar Wind Events according to the INTERBALL Project Data

The results of studying the interaction of two types of the solar wind (magnetic clouds and solar wind of extremely low density) with the Earth's magnetosphere are discussed. This study is based of the INTERBALL space project measurements and on the other ground-based and space observations. For moderate variations of the solar wind and interplanetary magnetic field (IMF) parameters, the response of the magnetosphere is similar to its response to similar changes in the absence of magnetic clouds and depends on a previous history of IMF variations. Extremely large density variations on the interplanetary shocks, and on leading and trailing edges of the clouds result in a strong deformation of the magnetosphere, in large-scale motion of the geomagnetic tail, and in the development of magnetic substorms and storms. The important consequences of these processes are: (1) the observation of regions of the magnetosphere and its boundaries at great distances from the average location; (2) density and temperature variations in the outer regions of the magnetosphere; (3) multiple crossings of geomagnetic tail boundaries by a satellite; and (4) bursty fluxes of electrons and ions in the magnetotail, auroral region, and the polar cap. Several polar activations and substorms can develop during a single magnetic cloud arrival; a greater number of these events are accompanied, as a rule, by the development of a stronger magnetic storm. A gradual, but very strong, decrease of the solar wind density on May 10–12, 1999, did not cause noticeable change of geomagnetic indices, though it resulted in considerable expansion of the magnetosphere.     

基于分布式星群的全相参雷达低副瓣波束形成设计方法

不同于地面稀布阵相参阵列雷达,分布式星群平台具有高速运动特性,相应地全相参合成效率受限于星间的空时频同步误差、波束指向误差等系统误差约束。提出了一种基于分布式星群的全相参雷达低副瓣波束形成设计方法。首先,从星群系统规模、星间安全距离、远场条件、探测链路等因素入手推导了有效探测距离区间。接着,给出了同步误差、波束指向误差以及卫星高速运动特性对全相参合成效率的定量影响评估方法。最后,利用空时频多维联合方法实现了低副瓣稳健波束形成,可有效增加无模糊视场范围,适用于实际星群规模有限的应用场景。仿真结果验证了所提算法的有效性。     

成像光谱仪编程选择波段数据采集系统的研究

随着成像光谱仪的发展,遥感数据量越来越大,这对电子学系统中的数据采集、传输和处理带来了一定的困难。基于目前技术和数据的实用性两方面考虑,采用编程选择波段的方法能够很好地解决数据量日益增大的问题,国内外的一些方案中已经对此有了一定的设想,即通过遥控指令改变波段数目、光谱取样间隔或波段的重组,这一切都要求有一个灵活性强、通用性好的数据采集系统,能够对不同的选择情况正确地收集用户所需的数据。文中对数据采集的可行性进行了研究,并提出了一个较为容易实现的方案。     

样条函数在轨道计算中的应用

提出了在已知现速度的情况下，用样条函数计算视加速度的新方法，避免了传统牛顿插值法的不可靠性及由此而产生轨道重构错误的缺点，仿真结果表明用样条函数法重构的轨道精度明显优于牛顿插值法。     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994-1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.