数字全息测量超高速撞击碎片云实验研究

在中国空气动力研究与发展中心(CARDC)超高速碰撞中心(HIRC)7.6 mm超高速碰撞设备的基础上，搭建纳秒级脉冲激光数字全息系统。提出滤波片和衰减片组合布置，减弱超高速碰撞等离子体自发光、提高信噪比的方法。实验获得了2.25 mm铝球弹丸以4.0 km/s的速度撞击0.5 mm厚铝板形成碎片云的全息图。采用小波变换算法对碎片云全息图进行重建，得到超高速撞击碎片云的三维结构和碎片大小。碎片云的轮廓呈椭球型，分为碎片云的前端、核心和外壳，碎片主要分布在弹丸破碎形成的碎片云核心，存在大碎片，且分布较集中，对后板的损伤也严重     

低速大转矩永磁游标电机在发酵罐中的应用

采用秸秆生产丁醇时,为了达到高效率发酵,需要使发酵液中菌体分布均匀,所加物料需要及时搅拌。工业化生产丁醇的发酵罐尺寸较大,搅拌过程对驱动电机的输出转矩要求较高,因此高效率、小体积、低速大转矩的秸秆发酵搅拌电机对工业化发酵生产丁醇意义重大。设计了一种定转子永磁游标电机用于发酵液搅拌,并对电机的槽极数、电磁性能进行了具体的研究。制造样机并采用滞环控制实现了对液态发酵对象的快速响应,且实现了低能耗、高效率的发酵过程。     

基于ANSYS Workbench的行星滚柱丝杠动态特性分析

通过Pro/Engineer建立行星滚柱丝杠三维模型，基于ANSYS Workbench有限元分析技术进行模态与谐响应分析，得到前六阶固有频率与各阶模态振型，确定共振频率，掌握对应频率下的位移峰值响应，并研究螺母处于不同工作位置时对固有频率的影响，为基于行星滚柱丝杠传动的舵系统抗振设计提供数据支撑。     

Real-time object tracking via least squares transformation in spatial and Fourier domains for unmanned aerial vehicles

This paper addresses the problem of real-time object tracking for unmanned aerial vehicles. We consider the task of object tracking as a classification problem. Training a good classifier always needs a huge number of samples, which is always time-consuming and not suitable for realtime applications. In this paper, we transform the large-scale least-squares problem in the spatial domain to a series of small-scale least-squares problems with constraints in the Fourier domain using the correlation filter technique. Then, this problem is efficiently solved by two stages. In the first stage, a fast method based on recursive least squares is used to solve the correlation filter problem without constraints in the Fourier domain. In the second stage, a weight matrix is constructed to prune the solution attained in the first stage to approach the constraints in the spatial domain. Then, the pruned classifier is used for tracking. To evaluate proposed tracker's performance, comprehensive experiments are conducted on challenging aerial sequences in the UAV123 dataset. Experimental results demonstrate that proposed approach achieves a state-ofthe-art tracking performance in aerial sequences and operates at a mean speed of beyond 40 frames/s. For further analysis of proposed tracker's robustness, extensive experiments are also performed on recent benchmarks OTB50, OTB100, and VOT2016.     

Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil

Vegetable oil can be used as a base oil in minimal quantity of lubrication(MQL). This study compared the performances of MQL grinding by using castor oil, soybean oil, rapeseed oil, corn oil, sunflower oil, peanut oil, and palm oil as base oils. A K-P36 numerical-control precision surface grinder was used to perform plain grinding on a workpiece material with a high-temperature nickel base alloy. A YDM–III 99 three-dimensional dynamometer was used to measure grinding force,and a clip-type thermocouple was used to determine grinding temperature. The grinding force, grinding temperature, and energy ratio coefficient of MQL grinding were compared among the seven vegetable oil types. Results revealed that(1) castor oil-based MQL grinding yields the lowest grinding force but exhibits the highest grinding temperature and energy ratio coefficient;(2) palm oil-based MQL grinding generates the second lowest grinding force but shows the lowest grinding temperature and energy ratio coefficient;(3) MQL grinding based on the five other vegetable oils produces similar grinding forces, grinding temperatures, and energy ratio coefficients, with values ranging between those of castor oil and palm oil;(4) viscosity significantly influences grinding force and grinding temperature to a greater extent than fatty acid varieties and contents in vegetable oils;(5) although more viscous vegetable oil exhibits greater lubrication and significantly lower grinding force than less viscous vegetable oil, high viscosity reduces the heat exchange capability of vegetable oil and thus yields a high grinding temperature;(6) saturated fatty acid is a more efficient lubricant than unsaturated fatty acid; and(7) a short carbon chain transfers heat more effectively than a long carbon chain. Palm oil is the optimum base oil of MQL grinding, and this base oil yields 26.98 N tangential grinding force,87.10 N normal grinding force, 119.6 °C grinding temperature, and 42.7% energy ratio coefficient.     

阵风载荷减缓系统故障分析

阵风引起的额外载荷会引起飞机结构疲劳,降低结构使用寿命。采用非定常气动力有理函数拟合方法建立时域状态空间下的动力学系统,设计了阵风载荷减缓系统。研究了阵风载荷减缓系统3种典型故障模式(副翼偏转饱和、舵机卡死、副翼偏转延时)的力学建模方法,并对机翼在阵风减缓系统故障模式下的阵风响应进行分析。仿真结果表明,3种故障模式均不利于阵风载荷减缓系统对阵风载荷的减缓,对于一些特定情况,故障模式下的阵风载荷减缓系统不仅不能减缓阵风载荷,还会带来由副翼偏转不当引起的额外负载。     

直升机风险科目“斜坡起降”驾驶要领探讨

直升机在执行“紧急救援”和“抗震救灾”等特殊任务过程中往往不得已要进行风险科目“斜坡起降”。在这种情况下，操作上稍有不慎就会酿成重大事故，有的新机型在进行“斜坡起降”这一科目试验时甚至请国外飞行员来完成这项工作。文章就直升机“仰坡起降”、“顺坡起降”、“左横坡起降”和“右横坡起降”的操作要领作几点阐述，供飞行试验工程技术人员和飞行人员参考。     

面向高级在轨系统的动态服务质量保证方法研究

AOS(Advanced Orbiting System,高级在轨系统)已经逐渐被各国空间组织采用,随着空间任务的发展趋势更多样化和复杂化,对AOS的QoS(Quality of Service,服务质量)也提出了更高要求.针对AOS服务质量的提升需求,提出了一种虚拟信道优先级策略,使用大容量缓存结合数据压缩动态策略和遥测数据抽帧策略相结合的QoS保证方法,通过分析返向链路带宽与航天器遥测用户带宽的裕量,可以动态调整QoS保证,以适应不同应用环境下的航天器AOS的QoS保证需求.通过模拟不同的工况进行仿真试验,结果表明,该AOS服务质量保证方法适用于返向链路带宽裕量充足和不足的工况,比传统的全同步策略和同步异步结合策略拥有更广泛的适应范围.     

基于计划到达时刻的四维航迹规划

为了加速空管自动化与智能化技术的应用与实施,提出了水平航迹与高度/速度剖面分阶段设计的四维航迹规划方法。基于动态时间规整与层次聚类方法实现历史雷达航迹聚类分析,完成水平航迹设计。建立速度剖面规划模型,通过航迹生成器与速度调整器交互协作,精细化控制进场时间,以满足计划到达时间要求。以上海浦东国际机场PINOT进场航班为例实施验证,结果表明,四维航迹规划方法可有效实现航班的计划到达时间,从而减少航班延误,提高终端空域运行效率。     

基于模型的系统工程概述

由于航空领域涉及的系统日益高度复杂,为更好推进基于模型的系统工程(Model Based System Engineering,MBSE)研发体系,通过从当前遇到的问题、推行基于模型的系统工程的必要性、优势、未来的挑战等方面进行了较为详细地阐述.基于模型的系统工程研发体系具有知识表示的无二义、系统设计的一体化、沟通交流的高效率等优势,是未来发展的大趋势.