TopPixelLoss:类别不均衡的遥感影像语义分割损失函数

针对遥感影像中类别不均衡的小目标分割效果不理想的问题，提出了一种类别不均衡小目标二分类分割的损失函数——TopPixelLoss损失函数。首先计算出每个像素的交叉熵，然后将所有像素的交叉熵按从大到小进行排序，随后确定一个K值作为阈值，筛选出前K个交叉熵最大的像素，最后对于筛选出的K个像素交叉熵取平均，做为损失值。在ISPRS 提供的 Vaihingen 数据集上，使用PSPNet网络与普通交叉熵、FocalLoss、TopPixelLoss三种损失函数分别对车辆进行二分类分割试验。结果表明，不同的K值，使用TopPixelLoss损失函数的平均交并比（MIoU）、F1-score、准确度（ACC）都最高;当K值为5×104时效果最佳，MIoU、F1-score、ACC分别比FocalLoss提高了3.0%、5.0%、0.1%。TopPixelLoss损失函数是一种针对类别不均衡分割非常有效的损失函数     

反向交叉眼对单脉冲雷达干扰效果分析及仿真验证

交叉眼干扰被认为是对单脉冲雷达干扰最有效的方式之一。基于雷达方程建立了隔离平台回波下的两点源反向交叉眼干扰模型，推导了交叉眼干扰欺骗角一般性公式，研究了干扰机发射天线间距、干扰平台旋转角和干扰机相对雷达之间距离等参数变化对角度欺骗效果的影响，并依据单脉冲雷达接收机获取角度的信息处理流程，建立了单脉冲雷达接收机仿真模型，对交叉眼数学模型的正确性和局限性进行了分析。研究结果表明：单脉冲雷达越靠近两点源交叉眼干扰机中心线、干扰机两发射天线间距越大、与干扰机距离越近时，角度欺骗效果越好；单脉冲雷达的欺骗角度随着与干扰机距离的接近呈指数式增大；数学模型和仿真模型计算的单脉冲雷达角度误差最大值随干扰机天线与雷达天线中心连线的夹角的增大呈指数化增长。研究可为交叉眼干扰工程设计作参考。     

直升机后缘襟翼驱动器迟滞现象仿真与抑制

直升机后缘襟翼多采用压电驱动器作为驱动元件，但是在使用过程中压电驱动器迟滞会对其振动控制性能产生不利影响，因此针对压电驱动器迟滞开展了迟滞建模与抑制研究。通过实验研究了压电驱动器在不同驱动频率下的迟滞特性，采用Bouc-Wen模型对驱动器迟滞现象进行了建模，并采用粒子群算法（PSO）辨识模型参数，与实际测量迟滞曲线进行了对比，在10~60 Hz范围内所建立的迟滞模型能够较为精确地描述压电驱动器迟滞现象。建立了基于Bouc-Wen逆模型的前馈补偿控制与PID反馈控制相结合的复合控制策略，实验结果显示该控制策略能够在10~60 Hz较宽的频率范围内有效抑制该压电驱动器迟滞现象。建立了考虑驱动器迟滞的主动控制后缘襟翼振动控制动力学模型，并对中等速度稳态前飞条件下后缘襟翼振动控制性能进行了仿真，仿真结果显示驱动器迟滞会在一定程度上削弱振动控制性能，而采用复合控制可以提高后缘襟翼旋翼振动控制性能。     

Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel

The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. This paper proposes a remote-controlled flexible pose measurement system in wind tunnel conditions for the separation of a target from an aircraft. The position and attitude parameters of a moving object are obtained by utilizing a single camera with a focal length and camera orientation that can be changed based on different measurement conditions. Using this proposed system and method, both the flexibility and efficiency of the pose measurement system can be enhanced in wind tunnel conditions to meet the measurement requirements of different objects and experiments, which is also useful for the development of an intelligent position and attitude measurement system. The position and the focal length of the camera also can be controlled remotely during measurements to enlarge both the vertical and horizontal measurement range of this system. Experiments are conducted in the laboratory to measure the position and attitude of moving objects with high flexibility and efficiency, and the measurement precision of the measurement system is also verified through experiments.     

Numerical Analysis of Dry Friction-Induced Vibration of Moving Slider-Elastic Annular Beam System

A disc-pad friction system is modelled as that two moving pads act symmetrically on an annular beam with flexible boundary condition.Simulation procedure is proposed to deal with the moving interactions and calculation is carried out by using the finite difference method,which shows that only the first-order mode vibration of the beam can be induced.Then the partial differential equation of motion of the disk is reduced to a first-order mode vibration system with time-varying stiffness.As the disk speed is decreased below the critical speeds,the relative equilibrium of the pad on the disk loses its stability and stick-slip type limit cycle vibrations are resulted in all directions′movements.Acceleration of the disk motion on the frictional instability is also investigated.The period of stick-slip vibration with large amplitude will be shortened with higher moving deceleration.     

基于动态补偿的多电机控制算法

多电机协调控制达到转速一致是电机控制中的一个关键难题，外加负载变动和电机参数变化时会引起电机性能的下降，达不到良好的控制效果。为使电机间保持转速同步，建立了永磁同步电机d-q坐标系下的矢量控制数学模型，基于转速跟随控制，提出一种基于单神经元PID的变增益速度补偿器进行偏差耦合控制。在MATLAB/Simulink建立了3台永磁同步电机的仿真模型。仿真结果表明，与传统PID固定增益速度补偿器算法相比，单神经元PID的变增益速度补偿器具有更强的鲁棒性以及更快的收敛性。     

DZ22B高温合金定向凝固叶片铸造缺陷的形成机理研究

采用SEM、EDS等分析手段研究了DZ22B镍基高温合金定向凝固涡轮叶片不同区域铸造缺陷的特点及其形成原因。结果表明,裂纹缺陷主要分布在叶身的中上部位,其形成机理主要归因于叶片在凝固过程中的共晶组织过多;而疏松缺陷分布在叶身和缘板部位,产生在枝晶间共晶组织附近。枝晶间距小补缩不足和反应生成的CO气体未及时排除是疏松形成的两大原因。     

Sensitivity analysis for probabilistic anti-resonance design of aeronautical hydraulic pipelines

In an uncertainty scheme, reliability and global sensitivity analysis is studied in this work, to provide helpful information for probabilistic anti-resonance design of vibration systems.Discussions show that the resonance failure problem can be viewed as a series system, in which input uncertainties are modeled by random variables. In order to quantitatively measure the contributions of input variables to the system reliability, a global sensitivity index is proposed, the properties of which are also discussed. Then the proposed index is tested with an aeronautical hydraulic pipeline system, which is under the excitation of pump vibration and at a risk of resonance failure. Sensitivity results under different failure criteria and variation coefficients are obtained and studied, from which significant and insignificant input variables can be identified.The proposed method provides a relatively new insight for anti-resonance design of engineering structures.