企业内部诊断制度化探讨

从控制理论来看,企业内部自我诊断制度化是可行的和必要的,它能够很好地解决企业管理系统对慢性管理问题的控制与改善,是管理控制的有效手段之一.企业内部自我诊断制度化必须具备相应的条件,通过建立一套完整的制度体系来保障实施,其内容包括建立相应的组织机构、信息流通渠道、诊断人员工作网络、现场问题反馈制度等.企业在建立诊断制度时必须结合企业实际,选择恰当的诊断形式.     

飞机机载设备可靠性增长摸底试验技术

某型飞机是首次较系统地开展可靠性设计的型号,从方案论证阶段开始至详细设计阶段,总师系统开展了一系列可靠性设计和管理工作。随着型号研制工作从设计转入试制,可靠性工作的重点则从设计控制转向研制产品的可靠性增长控制。其间,可靠性增长摸底试验技术对促进研制产品可靠性增长产生了明显的效果。可靠性增长摸底试验技术是根据可靠性增长的理论,利用可靠性试验的方法,结合国内机载电子产品可靠性状况和型号研制特点而提出的。其目的是利用较短的试验时间,将新研机载设备S型件的部分设计、工艺薄弱环节和缺陷暴露出来,在装机上天前采取有效的改正措施,以期定型试飞中少出故障,促进研制试飞顺利进行,并使设备的可靠性得到初步增长。     

华东地区围护结构节能研究

根据南京市的典型年逐时气象参数，对于该市的某一座高层建筑物，应用自编的逐时动态负荷模拟程序，输入围护结构（窗户、墙体和屋顶）相关的物理参数及其与周围环境的关系（地点及朝向等），计算围护结构冬季采暖期散热量及夏季制冷得热量。结果表明，采用双层塑窗代替单层塑窗，使用节能墙体代替传统墙体能够使得冬季围护结构传散热量减少51％，夏季围护结构总得热量减少46％。因此，这一结果为华东地区建筑节能技术提供了理论依据。     

二维小波变换及其在医学图像处理中的应用

介绍了二维离散小波变换的一般形式，在图像分解的基础上．分析了二维小波变换在医学图像消噪和图像增强中的应用，同时给出应用实例。结果表明，应用小波分析进行医学图像处理，能够有效地改善图像质量，有利于医生对病情的诊断和治疗。     

MONITORING OF ENERGETIC PARTICLE ENVIRONMENT INSIDE THE CHINA-BRAZIL EARTH RESOURCE SATELLITE

On 14 October 1999, the Chinese-Brazil earth resource satellite (CBERS-1) was launched in China. On board of the satellite there was an instrument designed at Peking University to detect the energetic particle radiation inside the satellite so the radiation fluxes of energetic particles in the cabin can be monitored continuously. Inside a satellite cabin, radiation environment consists of ether penetrated energetic particles or secondary radiation from satellite materials due to the interactions with primary cosmic rays.Purpose of the detectors are twofold, to monitor the particle radiation in the cabin and also to study the space radiation environment The data can be used to study the radiation environment and their effects on the electronics inside the satelhte cabin. On the other hand, the data are useful in study of geo-space energetic particle events such as solar proton events, particle precipitation and variations of the radiation belt since there should be some correlation between the radiation situation inside and outside the satellite.The instrument consists of two semi-conductor detectors for protons and electrons respectively. Each detector has two channels of energy ranges. They are 0.5-2MeV and ≥2MeV for electrons and 5-30MeV and 30-60MeV for protons. Counting rate for all channels are up to 104/(cm2@s)and power consumption is about 2.5 W. There are also the additional functions of CMOS TID (total integrated dose) effect and direct SEU monitoring. The data of CBMC was first sent back on Oct. 17 1999 and it's almost three years from then on. The detector has been working normally and the quality of data is good.The preliminary results of data analysis of CBMC not only reveal the effects of polar particle precipitation and radiation belt on radiation environment inside a satellite, but also show some important features of the geo-space energetic particle radiation.As one of the most important parameters of space weather, the energetic charged particles have great influences on space activities and ground tech nology. CBMC is perhaps the first long-term on-board special equipment to monitor the energetic particle radiation environment inside the satellite and the data it accnmulated are very useful in both satellite designing and space research.     

双层多目标规划若干问题的研究

研究了下层决策者无关联的双层多目标规划问题，在不同偏好意义下，给出了各自解的定义，讨论了线性双层多目标规划问题。     

An innovative study on low surface energy micronano coatings with multilevel structures for laminar flow design

Laminar flow design is one of the most effective ways to reduce the drag of a commercial aircraft by expanding the laminar flow region on the surface of the aircraft. As material science develops, the emergence of new materials such as low surface energy materials has offered new choices for laminar flow design of commercial aircraft. Different types of low surface energy micro-nano coatings are prepared to verify the effects on the boundary layer transition position and the drag of the airfoil through wind tunnel tests. The infrared thermal imaging technology is adopted for measuring the boundary layer transition, while the momentum integral approach is employed to measure the drag coefficient through a wake rake. Infrared thermal imaging results indicate that the coatings are capable of moving backward the boundary layer transition position at both a low velocity of Mach number 0.15 and a high velocity of Mach number 0.785. Results of the momentum integral approach demonstrate that the drag coefficients are reduced obviously within the cruising angle of attack range from 1° and 5° by introducing the low surface energy micro-nano coating technology.     

基于T-S模糊模型的模糊大系统的混合滤波

针对非线性大系统内部过程参数的检测估计,采用连续模糊大系统模型,利用lyapunov定理和分布式处理方法,给出了模糊大系统的H2/H∞混合滤波器设计方法。该方法在保证滤波误差系统全局稳定的同时,具备了H2/H∞性能。通过求解线性矩阵不等式,可以得到滤波器参数。最后,用一个数值例子验证了该方法的正确性和有效性。     

纤维增韧陶瓷基复合材料的比例极限应力与残余热应力关系

从细观力学角度分析并建立了纤维增韧陶瓷基复合材料从制备温度冷却到室温过程中产生的残余热应力与复合材料的比例极限应力的关系模型。该模型表明,减少复合材料的残余热应力或提高复合材料的纤维与基体的模量比,均可提高复合材料的比例极限应力。通过单调拉伸实验测试了先驱体浸渍裂解法(PIP)制备的2D SiC/SiC复合材料的比例极限应力,并采用文中建立的比例极限应力与残余热应力关系模型,计算出复合材料SiC基体的残余热应力为-19.5 MPa。分析表明,该结果是合理的。此外,引用了公开文献报道的5种复合材料体系数据,用于验证文中所建立的比例极限应力与残余热应力关系模型的适应性和可靠性,计算结果与实验结果最大误差为18.6%,表明该模型具有较好的适应性和可靠性,可为纤维增韧陶瓷基复合材料的研究提供新思路。