Cortical Microtubule Reorientation and Its Relation to Cell Surface Texture of Epidermal Cells of Arabidopsis Thaliana Hypocotyls under Simulated Microgravity Conditions

Gravitropic curvature growth of Arabidopsis hypocotyls mainly occurred in the rapid growing Elongation Zone (EZI), not in the slow-growing Elongation Zone (EZⅡ). By examining reorientation of Microtubules (MT) and phenotype of the cell wall in the EZI and the EZⅡ of Arabidopsis hypocotyls under normal gravitational condition, it is found that MTs in the rapid growing epidermal cells were mainly in the transverse direction, while those in the non-growing epidermal cells were in the longitudinal directions. However, this difference in cortical MT arrays between the EZI and EZⅡ cells disappeared when the seedlings were exposed to the simulated microgravity condition on a horizontal clinostat. Field emission scanning electron microscopy revealed that the surface texture of epidermal cells, like the direction of the MT, in the EZI and the EZⅡ also became similar when exposed to the simulated microgravity condition. This result indicated that simulate microgravity could modify the potential differentiation between the EZI and the EZⅡ by affecting the orientation of cortical MT in the epidermal cells.      

基于过程方法的测量设备控制

测量设备控制是企业内部管理和外部质量管理体系审核中的一项重要内容,在现有的管理中,因缺乏对相关过程进行系统识别,某些过程要素常被疏忽或遗漏,导致测量设备失控和测量结果失准。本文采用过程方法,系统地识别了测量设备控制的相关过程和过程要素,提出了过程监控指标及其评价准则,对于提高过程效率具有一定的参考价值。     

基于激光旋切法的陶瓷材料盲孔加工方法研究

介绍了激光打孔的基本原理,对激光能量、离焦量、轨迹在激光旋切法加工盲孔过程中对孔形和表面质量的影响进行了分析和试验验证,并给出了一般规律.依据试验结果确定了合理工艺参数,采用旋切法在碳纤维增强碳化硅陶瓷基复合材料（Cf/SiC）上打出了孔径为1 mm,孔深为1.1 mm,锥度小于15°的盲孔.     

Crystal orientation and morphology of α lamellae in wrought titanium alloys: On the role of microstructure evolution in β processing

To obtain high-quality aviation forgings of titanium alloys, β forging is an essential processing step which must be considered throughout a production process. In this work, the effect of β forging on the crystal orientation and morphology of lamellar α was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during β working resulted in the formation of low-angle grain boundary (LAGB_β) inside β grains. The lamellar α can penetrate through the LAGB_β, leading to similar intra α LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed. A continuous change of the β orientation in diffusive boundaries results in the formation of fine and disordered α lamellae without intra-lamellar boundary to hold the Burgers orientation relationship (OR). On sharp boundaries, it is prone to producing continuous grain boundary α (α_GB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary α for a smoother orientation change on the β grain boundary.     

风扇出口导向叶片低噪声设计Ⅰ:方法与优化

作为"风扇出口导向叶片（Outlet Guide Vanes，OGV）低噪声设计"系列文章的第1篇，本文在现有压气机气动设计流程的基础上，加入了噪声评估过程，建立了基于通流设计的气动/声学一体化设计方法。为提高设计阶段的评估速度，以三维升力面理论与管道声学理论为基础，从通流设计和造型设计输出中提取参数，结合转子尾迹模型，建立了转/静干涉噪声的解析预测模型。以现代大涵道比涡扇发动机风扇/增压级为对象，采用该模型系统分析了OGV轴向掠形与周向倾斜对转/静干涉噪声的影响，获取了轴向掠形角与周向倾斜角等三维设计参数与风扇噪声的关系图谱，初步确定了低噪声设计较优降噪量的掠和倾组合方案。以此为基础，在保持叶尖子午投影位置和弦长不变的前提下，将叶片前缘和径向积叠进行参数化，采用遗传算法进一步开展了OGV的低噪声优化设计，最终获得了2个优化方案，预估的降噪量达到了8 dB。     

基于TTE网络的分布式系统分区通信方法

针对新一代分布式IVMS及高可靠航电系统对通信网络的确定性通信要求，分析了符合ARINC653标准的分区间通信原理，研究TTE端系统缓冲方案，设计了分区间TTE通信映射配置，实现了分区间TTE通信驱动，建立了分区间TTE通信测试平台，通过实际测试表明，基于TTE网络的分布式系统分区通信方案有效可靠。     

终端区飞行程序与军航起落航线安全风险分析

为了对终端区内民航进离场程序与军航机场起落航线间的安全风险进行分析,提出了一种基于计算几何的两阶段三维分析方法。首先对终端区空域进行建模,并利用军航机场起落航线保护区确定军航机场活动范围。在此基础上,第一阶段利用计算几何方法分析军航机场活动区与进离场航线间在二维上是否存在安全风险;第二阶段利用Route距离分析在二维上存在安全风险的程序段与军航机场活动区的垂直安全间隔。以国内某终端区为例进行了实例分析,证明方法能科学高效地对进离场程序与军航机场起落航线间安全风险进行三维空间分析。     

民用运输类飞机最小机组工作量评估中的评估机组选取研究

研究了民用运输类飞机最小机组工作量评估中的评估机组选取问题。通过比较不同飞行人员的服役经历、背景及其在最小机组工作量评估中的差异,给出了一套可行的最小机组工作量评估机组的选取原则。     

企业级仿真数据管理技术研究与应用

结合性能样机技术的发展趋势,对仿真技术应用现状进行分析,给出了企业级仿真数据管理的技术原理,对仿真流程管理、仿真数据管理、异构软件集成等企业级仿真数据管理核心技术进行研究,并通过飞机研制中的工程应用,对相关技术和方法进行了验证。