VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

76°/40°双三角翼前缘涡破裂及其控制实验研究

流动显示结果表明,喷流能有效地推迟双三角翼前缘涡的破裂,且随着攻角的增大,前缘涡破裂位置逐渐推后,喷流极大地改善了大攻角情况下前缘涡的非对称破裂特性,能有效地克服可能出现的机翼的"摇滚"现象.另外,后缘喷流可以减弱乃至消除前缘涡混掺现象的发生,进而有利于飞行器的操纵.     

高速电路PCB板中电磁干扰的研究

结合设计印制电路板的实际经验 ,首先介绍了电磁兼容和电磁干扰 ,其次分析了高速电路PCB设计中产生电磁干扰的主要原因 ,最后提出了防止和抑制电磁干扰的方法以及提高电磁兼容性的具体措施。     

强场脉冲充磁退磁装置

介绍了充电电容器通过磁路瞬时放电产生强磁场的原理 ,选择回路参数可实现高矫顽力类永磁材料的充磁或者退磁 ,介绍了所研制的脉冲充磁退磁装置的性能。     

NIM4#铯冷原子喷泉钟新一代时间频率基准

回顾了NIM4 #钟实现 5 μK冷原子云 ,74cm原子喷泉和 0 95Hz线宽Ramsey跃迁实验 ,报道了 9 19GHz微波锁定到铯原子秒定义跃迁 ,频率稳定性达到 (5 - 7)× 10 -15(15 0 0 0s)。目前我们正在进行不确定度评估 ,可望不确定度进入 10 -15量级 ,建立我国新一代时间频率基准装置。     

通用电学参数自动校准系统接口研制

为了提高日常检定工作的工作效率,介绍一种基于LabVIEW平台下,以为接口的电学参数自动检定系统的组成、仪器控制方式及系统的特点。     

附加准直器的带顶盖静电分析器的数值模拟

对准直器限定视场的带顶盖的1／4球分析器的物理特性分析了数值模拟，相应的模拟程序是在修改裸分析器模拟程序后发展起来的。新程序了准直器引起的分析器结构配置的变化，且被应用于一个带准直器的分析器样本，产生了传输函数和几何因子的模拟结果。     

一种新型的通用计数器的设计

介绍一种以大规模集成电路为核心组成的通用计数器的设计。该通用计数器具有输出标准信号、测量频率、测量周期、累加计数和自校等多种功能。     

歼击机特殊部件设计载荷谱编制技术

介绍了用飞行模拟仿真法编制新机设计载荷谱的技术途径和特点.重点阐述了整体油箱压力/应力谱和垂尾阵风侧滑机动谱等歼击机特殊部件设计载荷谱编制技术.整体油箱载荷谱编制的关键在于各种载荷状态的压力计算,还应考虑地-空-地循环.垂尾谱不能完全由飞行模拟获得,而必须以空测统计数据为基础.     

星光对机动弹道导弹主动段的修正

 <正> 以惯性技术为主,并以星光、无线电等其它技术为辅的组合导航及制导技术是70年代以来发展较为迅速,并被认为是行之有效的技术手段。特别是对于大型航空航天飞行器。例如航天飞机、远程导弹等,只有采用精密的组合导航技术才能保证这类飞行任务的完成。任何单一的导航及制导技术都有其长处及弱点,将这些单一的技术手段组合起来扬长避短、相互补偿,毫无疑问是一种可行的途径。星光的引进将会使对