薄壁微三维结构件超精密研抛技术研究

针对影响薄壁微结构件超精密研抛的工艺因素,即单次进给量、研磨轨迹、研磨膏选择和去除量精确控制,通过大量的研抛加工试验,进行研抛工艺研究,得到能实现稳定和理想加工结果的研抛工艺,很好的满足零件性能要求。     

Numerical investigation of flow mechanisms of tandem impeller inside a centrifugal compressor

This study numerically investigated a single stage centrifugal compressor ‘‘Radiver’’ with a wedge diffuser and several tandem-designed impellers to explore the flow phenomena within the tandem impeller and the potential to enhance compressor performance. The results demonstrate that tandem design and clocking fraction (λ_s) significantly affects the compressor performance. The compressor stage with tandem impellers of Series A of boundary layer growth interruption alone are observed to have a widely operating range but efficiency and total pressure ratio penalty compared with that of conventional impeller. The tandem impeller with at least the same impeller efficiency as the conventional design is considered as a critical design criteria so that further modification process based on the flow characteristic of tandem impeller is necessary. In order to restrain the inducer wake and exducer shock losses, parameters modification of blade angle and thickness distributions are necessary and the modified tandem impeller of Series B is obtained. The modified tandem impeller with 25% clocking arrangement shows an 8.45% stall margin increase and maintains the total pressure ratio and efficiency as the conventional design, which proves the potential of tandem impeller to improve compressor stage performance. It is noteworthy that the tandem impellers of Radiver have not shown obviously balanced exit flow field and the fundamental mechanism of stall margin extending of tandem impeller lies on the improved impeller/diffuser matching performance resulting from the incidence angle variation at diffuser inlet.     

受限航路空域自主航迹规划与冲突管理技术

为了解决在基于航迹运行的空中交通管理自动化系统中人机意识同步的问题，以航路运行为对象，开展了面向受限空域的自主四维航迹（4DT）冲突探测与解脱（CD&R）技术研究。基于自由航线空域（FRA）环境，提出基于栅格的空域离散化处理与计算方法；在此基础上，提出受限空域自主航迹运行两阶段方法：阶段1运用可视图（VG）法和Dijkstra算法，实现了满足限制区约束的航空器期望航迹快速规划；阶段2提出航迹可达时空域模型及其图形化表达方法，并基于连续飞行动力学推导出了不同情况下的航空器位置更新模型，并采用局部冲突探测与解脱方法，以飞行距离最短为目标，实现航空器自主路径与速度联动规划，从而支撑空地、人机认知同步的无冲突四维航迹生成；最后，以中国西部典型空域为运行场景开展仿真实验，验证了所提方法的计算高效性和模型有效性，并对栅格尺寸和探测距离这2个关键参数进行了灵敏度分析。结果表明，所提方法能够支撑复杂空域高密度运行环境自主航迹运行，为推动自主空中交通系统发展提供了新思路和新方法。     

月球表层采样样品智能确认方法

表层采样是月球采样探测的重要方式，样品智能确认有助于提升工作效率与复杂问题处理能力。结合月球表层采样铲挖工作过程，分析了铲挖过程中臂载相机图像的特点，模仿有人参与识别过程，提出了层次解耦的月球样品智能识别流程，利用深度学习方法构建了一类深度卷积识别网络，完整地描述了图像、特征、标记在网络中的正反传递关系，并在月球表层采样地面试验中进行了验证，结果表明该方法对不同光照、不同背景、不同过程、不同形态的样品，具有较好的泛化识别能力，误识别率优于8.1%，平均单幅识别时间约0.7 s。     

Influence of pre-tension on ballistic impact performance of multi-layer Kevlar 49 woven fabrics for gas turbine engine containment systems

In this paper, ballistic impact tests on wrapped multi-layer Kevlar 49 woven fabric systems were carried out with a flat blade projectile to investigate the impact response during a fan blade out event. The influences of the number of Kevlar layers and pre-tension were discussed particularly. Test results were used to analyze failure modes and energy absorption characteristics of multi-ply Kevlar fabrics. Results show that there are two kinds of impact damage for fabrics: global deformation mainly involving stretching of yarns in the impact region and fabric wrinkle from both sides to the impact zone, and local damage characterized by yarn fracture, yarn pull-out, and yarn unraveling. The energy absorption capability of Kevlar 49 woven fabrics improves with the number of fabric layers. The energy absorbed by multi-layer fabrics increases slightly at the beginning and then decreases substantially with pre-tension. The work in this paper can provide guidance for designing light-weight multi-layer fabrics containment systems.     

作动器故障下的无人机容错控制方法

在执行任务过程中,无人机的传感器、作动器等均可能出现故障。文章针对常规布局无人机的作动器故障,提出了 1种反步法和控制分配相结合的容错控制方法。首先,建立无人机数学模型,并对作动器故障进行分类和建模;然后,根据模型设计反步最优控制器和基于控制分配的容错控制器;最后,通过仿真验证表明,所设计的容错控制方法能够实现作动器故障下的姿态快速稳定控制,且稳定性好,基本无侧滑角,各操纵面均在约束范围内,达到容错控制要求。     

新型航空发动机空气冷却器流动传热性能试验

空气冷却器是航空发动机中空气热量交换的重要场所,针对传统扰动结构强化换热不足问题,重点研究了空气冷却器 中扰动结构的结构形貌特征与流动换热的关系。以三周期极小曲面结构为基础,设计制造了D型极小曲面扰动结构、P型极小曲 面扰动结构和基于Sigmoid函数杂化方法的D-P型（P-D型）结构。并利用纳米CT重构出样品的3维数字特征,试验研究了不同结 构来流速度与压降、换热性能和综合换热性能的关系。结果表明：D型极小曲面结构具有最优的压降、换热性能和综合换热性能： D-P型杂化极小曲面结构的阻力系数f最大,比D型结构的高56.81%;D型的平均努塞尔数Nu比P型的高18.49%,P-D和D-P杂 化结构的换热性能比P型结构的有效提高;P-D型D-P型杂化结构的Nu分别比P型结构的高2%和8.27%。在4种结构中,D型结 构的综合换热性能最优,分别比P型、P-D型、D-P型结构的高40.35%、57.2%、71.02%。     

延伸冲击孔冲击冷却流动与换热特性的数值研究

采用数值模拟方法研究了延伸冲击孔冲击冷却系统的冷却特性,分析了3个冲击雷诺数和5个冲击孔延伸长度对冲击腔内流动与换热特性的影响,给出了靶面努塞尔数分布、靶面压力分布、中心截面流速与综合换热性能的变化。结果表明：延伸冲击孔可以有效地防止横流对冲击射流的偏转作用,同时使射流出口更加贴近冲击靶面壁面,冲击速度更高,可以明显提高靶面的换热系数,并使整个靶面上的换热系数分布也更加均匀。冲击冷却的冷却性能随着冲击孔延伸长度的增加而增加,相较于传统冲击冷却（baseline）,在L/d=2.5时靶面平均努塞尔数提升达15%以上,但压力损失也相对较高;对比不同延伸长度冲击孔的综合换热性能,发现存在最佳的L/d取值范围使冲击冷却系统获得最佳的综合冷却性能。在本研究范围内,最佳的L/d= 2.5。