某型发动机滑油压力调节异常故障原因分析

针对某型发动机地面试车时出现的滑油压力调节异常故障,分析了主滑油泵调压原理,建立主滑油泵滑油压力调节异常故障树,结合故障检查情况进行排查,确定了故障是由于弹簧垫盘和调压活门端面间隙小造成的,并在进行故障排除及装机验证之后,制定了有针对性的修理控制措施.     

高能(450 kV)X射线参考辐射场附加过滤研究

利用MCNP程序对450kV X光机建立模型，计算各参考辐射质下的原级谱、平均光子能量。对ISO 4037-1中已有范围的管电压与附加过滤片厚度关系曲线进行二次拟合，确定模拟厚度范围。利用MCNP计算各附加过滤组合下的平均光子能量值，并与外推法得出的平均光子能量值进行对比，将相对偏差最小时的附加过滤作为最终确定值。从部分能量点的模拟与测量结果的对比可看出，模拟得出的平均光子能量在2%以内与PTB及中国计量院测量结果保持一致，附加过滤最大相对偏差为18%。     

一种冲击响应谱试验设备校准装置的研制

介绍了冲击响应谱基本概念及其试验设备的分类与工作原理，参考现行冲击试验台检定规程提出了针对该设备的校准方法，设计了一种基于虚拟仪器技术的新型冲击响应谱试验设备校准装置，给出了典型冲击波形（半正弦、矩形、后峰锯齿）的冲击响应谱仿真计算结果并进行了验证，计算结果与理论结果完全一致，证明算法准确可靠，能够实现对冲击响应谱试验设备的校准。     

热电池电压异常波动技术分析及改进

分析了试验过程中热电池电压异常波动的原因,最终给出了问题的解决措施。该问题的解决对后续热电池的结构设计及工艺控制具有重要的指导意义。     

机载嵌入式可重构信号处理系统设计

为使机载嵌入式信号处理系统性能更加均衡,更好地适应机载嵌入式环境,在比较三种传统的机栽信号处理系统架构的基础上,提出了一种系统可伸缩、功能可重构的信号处理系统架构,并分析了其系统特性和关键技术。从可编程能力、处理性能、通用性以及可扩展性等方面比较了三种信号处理系统架构,结果表明:可重构信号处理系统架构具有较强的综合性能,能更好地满足机载嵌入式应用的需求。     

Tiangong 1 Target Spacecraft Returned to Earth

正China Manned Space Agency announced on April 2 that the Tiangong 1target spacecraft reentered the Earth’s atmosphere around 08:15 Beijing time on April 2 and came down in the middle of the South Pacific.Most parts were burned up during the reentry process.Tiangong 1 was developed by the     

薄壁微三维结构件超精密研抛技术研究

针对影响薄壁微结构件超精密研抛的工艺因素,即单次进给量、研磨轨迹、研磨膏选择和去除量精确控制,通过大量的研抛加工试验,进行研抛工艺研究,得到能实现稳定和理想加工结果的研抛工艺,很好的满足零件性能要求。     

Numerical investigation of flow mechanisms of tandem impeller inside a centrifugal compressor

This study numerically investigated a single stage centrifugal compressor ‘‘Radiver’’ with a wedge diffuser and several tandem-designed impellers to explore the flow phenomena within the tandem impeller and the potential to enhance compressor performance. The results demonstrate that tandem design and clocking fraction (λ_s) significantly affects the compressor performance. The compressor stage with tandem impellers of Series A of boundary layer growth interruption alone are observed to have a widely operating range but efficiency and total pressure ratio penalty compared with that of conventional impeller. The tandem impeller with at least the same impeller efficiency as the conventional design is considered as a critical design criteria so that further modification process based on the flow characteristic of tandem impeller is necessary. In order to restrain the inducer wake and exducer shock losses, parameters modification of blade angle and thickness distributions are necessary and the modified tandem impeller of Series B is obtained. The modified tandem impeller with 25% clocking arrangement shows an 8.45% stall margin increase and maintains the total pressure ratio and efficiency as the conventional design, which proves the potential of tandem impeller to improve compressor stage performance. It is noteworthy that the tandem impellers of Radiver have not shown obviously balanced exit flow field and the fundamental mechanism of stall margin extending of tandem impeller lies on the improved impeller/diffuser matching performance resulting from the incidence angle variation at diffuser inlet.     

受限航路空域自主航迹规划与冲突管理技术

为了解决在基于航迹运行的空中交通管理自动化系统中人机意识同步的问题，以航路运行为对象，开展了面向受限空域的自主四维航迹（4DT）冲突探测与解脱（CD&R）技术研究。基于自由航线空域（FRA）环境，提出基于栅格的空域离散化处理与计算方法；在此基础上，提出受限空域自主航迹运行两阶段方法：阶段1运用可视图（VG）法和Dijkstra算法，实现了满足限制区约束的航空器期望航迹快速规划；阶段2提出航迹可达时空域模型及其图形化表达方法，并基于连续飞行动力学推导出了不同情况下的航空器位置更新模型，并采用局部冲突探测与解脱方法，以飞行距离最短为目标，实现航空器自主路径与速度联动规划，从而支撑空地、人机认知同步的无冲突四维航迹生成；最后，以中国西部典型空域为运行场景开展仿真实验，验证了所提方法的计算高效性和模型有效性，并对栅格尺寸和探测距离这2个关键参数进行了灵敏度分析。结果表明，所提方法能够支撑复杂空域高密度运行环境自主航迹运行，为推动自主空中交通系统发展提供了新思路和新方法。