Precipitating Protons and Their Role in Ionization of the Polar Ionosphere

Spatial distributions of the electron density in the latitude range 60°–90° N were calculated on the basis of a physical model of the E and lower Fregions of the high-latitude ionosphere using statistical models of auroral proton and electron precipitation. It is shown that precipitating protons can play the key role in the ionization of the Eregion in the dusk and midnight sectors of the auroral oval. However, quantitative estimates of the contribution of protons to the ionization depend on the used statistical models of electron precipitation. Comparison of the electron density profiles calculated for two incoherent scatter radars, EISCAT (Tromsö) and ESR (Svalbard), for simultaneous precipitation of electrons and protons and for electron precipitation only show that the influence of protons is the most significant in the dusk sector over the EISCAT radar and in the midnight sector over the ESR radar. The results presented indicate the need to take protons into account when radar data are used to derive precipitating electron spectra.     

固体火箭发动机试验故障分析

从工程研制角度出发，探讨了分析固体火箭发动机试验失败原因的一般方法和过程，根据某发动机试验故障的具体情况，运用这种试验故障分析方法和过程（即针对试验故障进行故障树分析，设计复审分析，数据曲线的复核复算分析和验证试验），找出造成发动机试验故障的具体原因，确定故障机理；而后针对性地采取综合技术措施，并对这些措施进行试验验证，故障归零。     

基于Infineon CAN器件的总线通信速率侦测方法

本文论述了采用Infineon(sIEMENS)CAN器件侦测CAN总线通信Baudrate的两种方法。在未知现场运行CAN系统参数的情况下，采用所述方法可使未初始化的新的CAN节点接人CAN系统，而不影响现有CAN系统的运行。     

导弹子母弹子弹抛撒弹道模型及数字仿真

建立了导弹子母弹抛撒弹道模型，并编制了抛撒弹道仿真程序，仿真结果与靶场试验结果一致，仿真程序也适用于所有弹道导弹子母弹撒 轴对称子弹的无控弹道仿真，可为地地导弹子母作战使用及作战效能研究提供强有力的分析工具。     

基于AT89C52的离散信号测量电路设计

介绍了离散信号测量与控制在反舰导弹雷达导引头自动测控系统中的重要性 ,给出了基于AT89C5 2单片机控制的离散信号测量电路的具体构成和工作原理     

一种新的四路激光跟踪坐标测量系统的基点标定方法

在激光跟踪三维坐标测量系统中,系统首先要经过标定,才可以进行实际测量。因此系统标定的准确度会直接影响系统最终测量准确度。为了提高标定准确度,提出一种新的标定方法,即利用直线法原理,在优化布局下,采用两路激光干涉仪测量出基点的三维坐标。仿真结果表明目标点相对于基点呈对称分布时,测得的基点坐标准确度比非对称分布时高6到7倍,并通过实验得出了在该优化布局下的基点坐标。     

斜楔式扭转振动器原理研究

为了解决扭转振动攻丝系统体积大、成本高、使用寿命短等关键问题,使攻丝力矩明显减小的振动攻丝技术能够得到广泛应用,提出了一种结构紧凑、压力角小、具有对称结构、制造工艺简单的斜楔式扭转振动器的传动原理,导出了该振动器的输出运动方程所要满足的必要条件,并给出了输入输出构件凸轮廓线的一般方程.最后通过一个例子证实了方程的正确性.这种扭转振动器可以广泛地应用于振动攻丝、振动铰孔加工.     

KuaFu Mission

The KuaFu mission-Space Storms, Aurora and Space Weather Explorer-is an "L1+Polar" triple satellite project composed of three spacecraft: KuaFu-A will be located at L1 and have instruments to observe solar EUV and FUV emissions, and white-light Coronal Mass Ejections (CMEs), and to measure radio waves, the local plasma and magnetic field,and high-energy particles. KuaFuB1 and KuaFu- B2 will bein polar orbits chosen to facilitate continuous 24 hours a day observation of the north polar Aurora Oval. The KuaFu mission is designed to observe the complete chain of disturbances from the solar atmosphere to geospace, including solar flares, CMEs, interplanetary clouds, shock waves, and their geo-effects, such as magnetospheric sub-storms and magnetic storms, and auroral activities. The mission may start at the next solar maximum (launch in about 2012), and with an initial mission lifetime of two to three years. KuaFu data will be used for the scientific study of space weather phenomena, and will be used for space weather monitoring and forecast purposes. The overall mission design, instrument complement, and incorporation of recent technologies will target new fundamental science, advance our understanding of the physical processes underlying space weather, and raise the standard of end-to-end monitoring of the Sun-Earth system.     

现代微波测量的发展动态

从微波测量仪器、测量技术及测量分析出发 ,简单地阐述了现代微波测量发展的趋势。供微波测量人员参考     

GPS定位数据在海洋一号卫星中的应用与比较

简要介绍了海洋一号卫星星载GPS接收机的定位原理、流程和应用，探讨了一种在轨定位结果的确认和互验方法．借助于卫星工具包软件(STK)，利用NASA网站公布的HY-1卫星两行根数(TLE)进行卫星轨道推算，生成星下点位置，并与相应时刻星载GPS接收机实测数据得到的星下点位置进行比较，由此得到两种方法定位结果之间的偏差，用实际在轨数据验证了两者的位置符合程度．