一种利用ILSP的同步DS-CDMA信号快速盲解扩算法

针对同步DS-CDMA信号的盲解扩问题，本文提出了一种基于迭代最小二乘投影算法(ILSP)的快速盲解扩算法。本算法首先通过对截获信号的协方差矩阵进行特征分解，估计出由各用户扩频序列张成的信号子空间，然后结合扩频码序列的有限符号集特性，利用ILSP算法消除由特征分解产生的酉矩阵模糊问题，得到扩频序列的精确估计，最后利用估计得到的扩频序列对截获信号解扩得到信息码序列，完成DS-CDMA信号的盲解扩。仿真结果表明本算法在低信噪比条件下具有良好的盲解扩性能，且相较传统算法本文提出算法大大降低了计算复杂度 。     

五边平行进近冲突风险定量分析模型

针对飞机五边平行进近时飞行冲突,提出了一种五边平行进近飞行冲突定量分析模型。模型通过飞机在任意时刻的标称位置坐标与因不确定性因素导致的航迹偏移量之和,形成飞机任意时刻真实位置坐标,基于此推导出飞机在五边平行进近时冲突风险计算公式。在分析不确定性因素导致航迹偏离时,提出了一种基于布朗运动的随机过程来描述因干扰因素导致飞机随机运动的方法。在建立模型后,使用蒙特卡罗仿真方法计算了飞行冲突概率,结果理想。     

^(137)Cs,^(60)Co大面积航空平面源的制备技术CSCD

用于校准航空γ谱仪的137Cs,60Co大面积航空平面源对传统的涂刷制源技术提出了挑战,为确保平面上的均匀性,借鉴现代网格点阵喷涂技术,将137Cs,60Co两种放射性标准溶液分别定量滴注在底衬滤纸上,晾干后热塑封并用环氧树脂将塑封片固定在梯形铝板上,由8块梯形铝板拼接为边长1m的正六边形航空平面源。制备的航空平面源的扩展不确定度(k=2)为4%,不均匀性优于10%。     

数值模拟方法对NASA CRM模型阻力预测的影响

在复杂工程外形的数值模拟中，网格类型、规模和分布、湍流模型、数值格式等都会不同程度影响模拟结果。如何评估这些模拟方法对模拟结果的影响，并识别对模拟结果影响较显著的因素，对于CFD的发展方向有积极的借鉴指导意义。为了综合研究不同因素对商用运输机外形阻力预测的影响，以AIAA第六届阻力预测会议外形NASA CRM为研究对象，同时考虑了网格、湍流模型、无黏通量格式和体心梯度求解方法等因素对阻力预测的影响。分析中采用枚举法和正交试验设计两种方法，并使用了基于聚类分析的定性敏感性分析方法和基于Mckay主影响分析的定量方法，识别出对阻力预测影响较大的因素，这为数值模拟方法的发展指明了方向。     

双脉冲瞬态散斑全场测量方法研究CSCD

散斑测量技术在瞬态振动过程测量中具有不可或缺的重要地位。提出双脉冲瞬态散斑全场测量技术，解决了双脉冲激光器与双曝光相机的时序同步的关键技术，设计了基于双脉冲激光器的瞬态散斑光路系统，搭建了双脉冲瞬态散斑全场测量系统，从而实现了（2~800）μs 时间间隔内连续可调的瞬时振动形貌的测量。     

基于脑电功率谱密度的作业人员脑力负荷评估方法

脑力负荷状态的准确识别对减少因作业人员无效脑力负荷导致的人因事故具有重要意义。针对人-机系统中作业人员脑力负荷客观评估问题开展了基于MATB-Ⅱ平台的3种不同脑力负荷水平下的航空情境实验，记录16名被试的NASA任务负荷指数（NASA-TLX）量表数据和脑电（EEG）信号，提出了一种基于脑电功率谱密度（PSD）和支持向量机（SVM）的个体脑力负荷评估方法。结果表明：随着实验设计脑力负荷水平增加，被试的主观脑力负荷得分显著提高（p<0.001），这表明该实验任务设计较好地诱发了低负荷、中负荷和高负荷情境。在此基础上，通过网格搜索法确定个体脑力负荷评估模型的统一优化参数，惩罚系数取3 000，核函数参数取0.000 1，模型测试正确率达到0.966 5±0.029 8，宏平均的受试者工作特征曲线下的面积（Macro-AUC）达到0.991 0±0.011 4。本文为作业人员脑力负荷状态的客观和准确评估提供了一种新的办法，为后期作业人员脑力负荷状态的实时判别提供模型基础。     

An innovative study on low surface energy micronano coatings with multilevel structures for laminar flow design

Laminar flow design is one of the most effective ways to reduce the drag of a commercial aircraft by expanding the laminar flow region on the surface of the aircraft. As material science develops, the emergence of new materials such as low surface energy materials has offered new choices for laminar flow design of commercial aircraft. Different types of low surface energy micro-nano coatings are prepared to verify the effects on the boundary layer transition position and the drag of the airfoil through wind tunnel tests. The infrared thermal imaging technology is adopted for measuring the boundary layer transition, while the momentum integral approach is employed to measure the drag coefficient through a wake rake. Infrared thermal imaging results indicate that the coatings are capable of moving backward the boundary layer transition position at both a low velocity of Mach number 0.15 and a high velocity of Mach number 0.785. Results of the momentum integral approach demonstrate that the drag coefficients are reduced obviously within the cruising angle of attack range from 1° and 5° by introducing the low surface energy micro-nano coating technology.     

Exploiting global information in complex network repair processes

Robustness of complex networks has been studied for decades,with a particular focus on network attack.Research on network repair,on the other hand,has been conducted only very lately,given the even higher complexity and absence of an effective evaluation metric.A recently proposed network repair strategy is self-healing,which aims to repair networks for larger compo nents at a low cost only with local information.In this paper,we discuss the effectiveness and effi ciency of self-healing,which limits network repair to be a multi-objective optimization problem and makes it difficult to measure its optimality.This leads us to a new network repair evaluation metric.Since the time complexity of the computation is very high,we devise a greedy ranking strategy.Evaluations on both real-world and random networks show the effectiveness of our new metric and repair strategy.Our study contributes to optimal network repair algorithms and provides a gold standard for future studies on network repair.     

磁选态单束铯束管束光学参数的模拟计算和设计

为提高铯束管跃迁信号强度,在束光学参数设计中,用蒙特卡罗方法模拟计算铯原子通过率和未跃迁比例。通过改变模拟计算中的束光学参数,分析铯原子通过率、未跃迁比例和倍增器首极电流的变化趋势,得到了主要束光学参数的合理取值范围。在铯束管实际装配和试验中使用束光学参数设计结果,有效地增加了倍增器首极电流。     

A general calculation method to specify center-of-buoyancy for the stratospheric airship with multiple gas cells

As the lighter-than-air (LTA) flight vehicle, the stratospheric airship is a desirable platform to provide communication and surveillance services. During the ascent from sea-level to the mission altitude, the volume of the lifting gas may change significantly, which will result in the change of the center-of-buoyancy (CB). A general calculation method is developed to specify CB for the stratospheric airship with a double-ellipsoid hull and an arbitrary number of the gas cells. The cross-section-integral (CSI) method is used as a basic calculation scenario to specify CB. Considering the complexity in determining the boundary between the helium and air in the gas cell, a searching algorithm is put forward and the specification of CB can be conducted by the iterative calculation. As an important application, the stable condition of the pitch angle is analyzed when the change of CB is involved. Under different initial configurations, the stable pitch angle of the stratospheric airship during the ascent is specified and compared, which shows the advantages of the multi-gas-cell configuration. The results of this paper may provide an important reference for the engineering application of the stratospheric airship.