GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

以经营者人力资本效用价值为主导的激励模型研究

对经营者激励机制的研究在我国已有多年，但一直未形成良好的激励体系。本文提出的以经营者人力资本效用价值为主导的激励模型是在企业效益分离的基础上，以股票期权和股票期股的组合方式设计的激励模式。     

高燃速丁羟推进剂配方研究

通过多种途径的试验,对高燃速丁羟推进剂配方进行了研究.试验结果表明,采用超细防结块氧化剂和液固组合燃速催化剂能使推进剂的燃速达到70mm/s以上(在6.864Mpa压强下);采用组合工艺助剂可改善推进剂工艺性能.本推进剂燃烧稳定,压强指数和温度敏感系数较低,力学性能良好,为高燃速推进剂的研制奠定了良好的基础.     

激光外差干涉仪光电信号处理方法及特点

叙述和分析了外差激光干涉光电信号处理主其特点，指出了它们各自的应用范围，同时介绍了一处新型的光电信号处理方法，它不仅使外差干涉仪用于动态测量，而且可以同时实现高分辩率测量 。     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

Implementation of a three-phase high-power-factor rectifier with NPC topology

A three-phase four-wire power factor corrector based on neutral-point-clamped (NPC) topology is adopted to reduce the current harmonics and increase the input power factor. Using the NPC topology, the voltage stress of power switches can be reduced to the half of the dc-link voltage. With the dc-link voltage controller and the phase locked loop circuit, the balanced and sinusoidal line currents can be drawn from the ac supply system under the balance and unbalance mains voltages. The hysteresis current comparators are adopted in the current control loop to track the line current commands. Three voltage levels are generated on the ac terminal to the neutral point. Simulations and experiments are provided to verify the validity and the effectiveness of the proposed control scheme.     

航天遥感仪器的反射镜轻量化的研究

反射镜轻量化是航天遥感仪器轻型化的重要技术途径之一。阐述了反射镜轻量化的意义,反射镜材料的选择,玻璃反射镜轻量化的结构型式和设计要求、设计方案和计算以及温度试验结果。     

中国农地宏观管理主体与微观主体的博弈分析

通过中央政府和地方政府与村集体在农地管理中主体行为和它们之间利益博弈的分析,指出了不同管理主体的行为变化对各主体利益的影响以及由此引发的农民利益的变化.文章首先从子博弈分析出发,分析了中央政府与地方政府在农地管理中的博弈过程,其次分析了地方政府与农民集体利益的代表--村集体的博弈,最后建立三个主体的主博弈模型,进而探讨了农地管理主体博弈的帕累托改进,并提出明确农地的管理主体、规范农地管理主体的行为,做实农民的微观管理主体地位等政策建议.     

基于MFC和COM的圆柱螺纹量规参数自动化计算与报表

在VC 6.0开发环境下,完成了基于MFC库和COM技术的公制圆柱螺纹量规大径、中径与小径的基本尺寸和极限偏差的自动化计算程序,中径计算过程计入了测量力等影响因素在内的综合修正量.实现了多量规的批量输入与管理,并将结果按需输出为Excel文档,留作测量过程的参考文件.文中详细介绍了软件的功能模块划分,数据的组织方式与功能的具体实现步骤.软件试用结果表明,该工作有效地解决了螺纹量规检定中需频繁查表、计算复杂且出错率高等问题,较大程度地提高了工作效率.