Exploiting global information in complex network repair processes

Robustness of complex networks has been studied for decades,with a particular focus on network attack.Research on network repair,on the other hand,has been conducted only very lately,given the even higher complexity and absence of an effective evaluation metric.A recently proposed network repair strategy is self-healing,which aims to repair networks for larger compo nents at a low cost only with local information.In this paper,we discuss the effectiveness and effi ciency of self-healing,which limits network repair to be a multi-objective optimization problem and makes it difficult to measure its optimality.This leads us to a new network repair evaluation metric.Since the time complexity of the computation is very high,we devise a greedy ranking strategy.Evaluations on both real-world and random networks show the effectiveness of our new metric and repair strategy.Our study contributes to optimal network repair algorithms and provides a gold standard for future studies on network repair.     

Transonic buffet control research with two types of shock control bump based on RAE2822 airfoil

Current research shows that the traditional shock control bump (SCB) can weaken the intensity of shock and better the transonic buffet performance.The author finds that when SCB is placed downstream of the shock,it can decrease the adverse pressure gradient.This may prevent the shock foot separation bubble to merge with the trailing edge separation and finally improve the buffet performance.Based on RAE2822 airfoil,two types of SCB are designed according to the two different mechanisms.By using Reynolds-averaged Navier-Stokes (RANS) and unsteady Reynolds-averaged Navier-Stokes (URANS) methods to analyze the properties of RAE2822 airfoil with and without SCB,the results show that the downstream SCB can better the buffet performance under a wide range of freestream Mach number and the steady aerodynamics characteristic is similar to that of RAE2822 airfoil.The traditional SCB can only weaken the intensity of the shock under the design condition.Under the off-design conditions,the SCB does not do much to or even worsen the buffet performance.Indeed,the use of backward bump can flatten the leeward side of the airfoil,and this is similar to the mechanism that supercritical airfoil can weaken the recompression of shock wave.     

基于实体-属性框架的领域知识库构建

知识库是进行各种自然语言处理任务不可或缺的一项基础性的资源。而目前知识库的构建还是一个难点问题,尤其是以自动方式构建复杂的领域性知识库系统的研究还处于探索阶段。本文提出一种基于实体-属性框架的领域知识库自动构建方法,致力于利用航空百科辞典的信息自动获取术语之间的上下位关系及部分实体属性关系,其中,基于多策略的上下位关系术语对提取融合了后缀子串匹配、模板自动构建、实质提取三种方法,分别考虑了辞典中反映上下位关系的不同信息。其中模板自动构建方法,在无需人工标注语料的情况下获得了比较好的效果。属性提取部分采用了以人工标注语料为前提的模板匹配方法。实验表明,本文系统对术语上下位关系抽取的F值达到76.01%,对各个属性的抽取也达到了75%以上。     

抗辐射保偏光纤的制备及其特性研究

通过对保偏光纤进行光漂白与低温相结合处理的方式，来提高光纤的抗辐射性能。保偏光纤再经过1.0 kGy的高剂量预辐照处理后，其损耗会明显增大。随后采用980nm的激光对光纤进行光漂白处理,其损耗并没有发生明显变化。但是，处理后的样品在小剂量辐照条件下其光纤传输呈现先减小后增大的趋势。对于通过液氮进行冷处理的预辐照样品，其光纤传输损耗得到明显的降低，同时光纤经过小剂量辐照后的损耗同样也具有先减小后增大的现象。最后，将两种处理方式相结合，一方面可以有效地降低预辐照光纤的传输损耗，另一方面也使得保偏光纤在小剂量辐照的条件下，使其传输损耗具有减小的趋势，大大提高了保偏光纤在小剂量辐照条件下的抗辐照特性。     

磁选态单束铯束管束光学参数的模拟计算和设计

为提高铯束管跃迁信号强度,在束光学参数设计中,用蒙特卡罗方法模拟计算铯原子通过率和未跃迁比例。通过改变模拟计算中的束光学参数,分析铯原子通过率、未跃迁比例和倍增器首极电流的变化趋势,得到了主要束光学参数的合理取值范围。在铯束管实际装配和试验中使用束光学参数设计结果,有效地增加了倍增器首极电流。     

空间激光通信系统中的信道纠错编码技术

由于空间激光通信系统的信道状态和链路捕获跟踪的不确定性,多种形式的信道纠错编码技术正被广泛发展研究。结合空间激光通信链路中误码性能的主要影响因素,分别选择合适的编码方案进行分析。通过仿真实验可知,对于在大气结构参数为1.5×10~(-14) m~(-2/3)、风速为20 m/s的空地激光链路的环境下,在系统数据速率为2 Gbit/s、要求误码率为10~(-6)时,LDPC码结合交织码相对未编码系统有3 dB的等效编码增益,LT码相对未编码系统有3.8 dB的等效编码增益。提供了一种能快速生成、扩展和校验的编码和交织实现方法,以抵抗大气湍流的快速变化对系统性能产生的影响。     

静止轨道卫星通信链路的预算与分析

星地链路计算作为卫星通信的重要技术，是卫星通信系统设计的基础和理论依据，直接决定了卫星通信系统的链路通信质量。由于影响卫星链路的因素很多，设计中存在一处不合理即使得整条星地链路不可用，造成巨大的损失。而且在实际设计中无法做到最理想的链路状态，往往需要在某方面有所取舍，这也是链路计算中的一大难点。基于目前国际通用的链路计算方法，将星地链路上下行拆分，独立计算，综合分析，再结合实际工程经验，分析和计算实际工程案例，针对不同的链路配置给出相应合理的设计方法，可作为静止轨道通信卫星星地链路计算分析的参考。     

精密露点仪标准装置的性能测试及计量软件设计

文章介绍了以373型精密露点仪为主标准器的湿度标准装置的原理及构成,对该装置的重复性和稳定性进行了测试。结果表明温度重复性实验的标准偏差为0.00℃,相对湿度重复性实验的标准偏差为0.07%RH,露点温度重复性实验的标准偏差为0.01℃。温度稳定性实验的标准偏差为0.02℃,相对湿度稳定性实验的标准偏差为0.33%RH,露点温度稳定性实验的标准偏差为0.066℃。基于美国NI公司的Labview软件开发平台,开发了湿度仪器仪表计量软件。软件以模块化思想为基础,可实现数据自动处理,报告自动生成。     

论高职毕业生职业期待的矛盾与对策

高职院校毕业生因为就业意识、动机与认知上的种种矛盾导致了职业期待的偏差,影响了就业质量,降低了职业期待吻合度。社会要开拓就业市场,加强职业教育宣传。学校要对接就业市场,加强分类指导与分层指导。毕业生要适应就业市场,做好就业心理调适。这样才能提高高职院校毕业生就业质量,满足职业期待。     

Influence of TiB2 particles on machinability and machining parameter optimization of TiB2/Al MMCs

In situ formed TiB₂ particle reinforced aluminum matrix composites (TiB₂/Al MMCs) have some extraordinary properties which make them be a promising material for high performance aero-engine blade. Due to the influence of TiB₂ particles, the machinability is still a problem which restricts the application of TiB₂/Al MMCs. In order to meet the industrial requirements, the influence of TiB₂ particles on the machinability of TiB₂/Al MMCs was investigated experimentally. Moreover, the optimal machining conditions for this kind of MMCs were investigated in this study. The major conclusions are: (1) the machining force of TiB₂/Al MMCs is bigger than that of non-reinforced alloy and mainly controlled by feed rate; (2) the residual stress of TiB₂/Al MMCs is compressive while that of non-reinforced alloy is nearly neutral; (3) the surface roughness of TiB₂/Al MMCs is smaller than that of non-reinforced alloy under the same cutting speed, but reverse result was observed when the feed rate increased; (4) a multi-objective optimization model for surface roughness and material removal rate (MRR) was established, and a set of optimal parameter combinations of the machining was obtained. The results show a great difference from SiC particle reinforced MMCs and provide a useful guide for a better control of machining process of this material.