基于矩阵填充的二维自适应波束形成算法

针对基于矩阵填充的二维自适应波束形成问题,提出一种基于奇异值门限(SVT)的特征分解线性约束最小方差(SVT-ELCMV)算法。首先建立二维自适应波束形成矩阵填充模型,其次验证接收信号矩阵满足零空间性质(NSP),并分析最小可恢复阵元数,最后以SVT算法将稀疏阵列信号恢复为完整信号,并通过修正的特征分解线性约束最小方差(LCMV)形成有效波束。算法解决了稀疏阵列平均副瓣大幅度上升的缺陷,且在平面阵列部分阵元无法正常工作时依然有效。计算机仿真表明:SVT-ELCMV算法可使稀疏阵列具有与完整阵列相同的二维波束形成能力,并可有效抑制干扰信号,验证了算法的有效性和优越性。     

Al—7%Si合金综合处理及其力学性能的研究

在有效的熔体处理基础上,对Al-Si合金进行适当的微合金化处理,可明显提高Al-Si合金的力学性能,本文通过对Al-7%Si合金精炼,细化,变质处理后,加入Mg,Zr ,V等元素,使合金力学性能大幅度提高。     

Model reference adaptive control with smooth switching scheme for piecewise linear systems and its application in turbofan engine control

A model reference adaptive control (MRAC) with smooth switching scheme was proposed for piecewise linear systems, and the method was utilized in turbofan engine control to avoid the discontinuity of control input. In this scheme, each sub-region of the operating envelope had its own MRAC controller, and smooth indicator function based smooth switching scheme was introduced to switch multiple controllers smoothly at the boundary of adjacent sub-regions. The Lyapunov stability analysis indicated that the proposed smooth switching scheme can guarantee the convergence of the closed-loop system during the controllers switching. The tracking error system was converted into a switched system to analyze the global stability of the closed-loop system. The advantage of the method was that the chattering of system output and instability caused by asynchronous switching can be eliminated. The simulation illustrates the effectiveness of the proposed control scheme in comparison with the existing MRAC controller with gain scheduling for turbofan engine.      

Aerodynamic optimization design of general parameters for cycloidal propeller in hover based on surrogate model

A surrogate-model-based aerodynamic optimization design method for cycloidal propeller in hover was proposed, in order to improve its aerodynamic efficiency, and analyze the basic criteria for its aerodynamic optimization design. The reliability and applicability of overset mesh method were verified. An optimization method based on Kriging surrogate model was proposed to optimize the geometric parameters for cycloidal propeller in hover with the use of genetic algorithm. The optimization results showed that the thrust coefficient was increased by 3.56%, the torque coefficient reduced by 12.05%, and the figure of merit (FM) increased by 19.93%. The optimization results verified the feasibility of this design idea. Although the optimization was only carried out at a single rotation speed, the aerodynamic efficiency was also significantly improved over a wide range of rotation speeds. The optimal configuration characteristics for micro and small-sized cycloidal propeller were: solidity of 0.2-0.22, maximum pitch angle of 25°-35°, pitch axis locating at 35%-45% of the blade chord length.      

一种提高螺旋桨相同步噪声模型辨识精度的方法

相同步降噪一般先通过一定飞行条件下的实测数据辨识出螺旋桨噪声模型,然后基于噪声模型计算出该条件下的最优相角,再将最优相角用于相同步降噪。在噪声模型辨识的过程中,受飞行速度、高度和气流变化等的影响,实测数据经常会发生较大的波动,从而影响辨识模型和最优相角的准确性。提出一种基于小波滤波和三参数正弦拟合法的最小数据波动的噪声数据选取方法,提高噪声模型的辨识精度,该方法通过小波滤波算法从噪声信号中提取出螺旋桨的叶尖通过频率信号,采用三参数正弦拟合算法合理地选择出波动最小的数据用于噪声模型辨识,从而有效地回避较大波动数据,提高辨识模型的精度。试验结果表明相较于传统使用固定数据辨识所得的噪声模型,使用最小波动数据辨识所得噪声模型能够获得更高的精度,且噪声模型预测的声压级和实际测量的声压级误差小于1dB,模型预测的最优相角与实际最优相角的误差小于5°,最优相角在试验位置点能够实现高达19.5dB的降噪效果。     

异步电机无速度传感器带速重投策略

在异步电机转速自适应全阶观测器无速度传感器控制方法的基础上,提出了一种基于波波夫稳定性理论的带速重投策略。该策略能够反映出转速估计值与实际值之间的误差关系,并通过自中心向两侧检索的方法使得转速估计值快速地向实际值收敛。采用了一种预励磁方案来达到减小带速重投过程中电流冲击的目的。仿真结果证明了所提策略的准确性和有效性。     

钛/铝异质金属搅拌摩擦焊技术研究进展

钛合金和铝合金均具有质轻、比强度高和抗腐蚀性能好等优点,已广泛应用于航空航天、军事工业和公共交通等领域,钛/铝异种金属复合结构的连接逐渐成为研究热点。然而,由于物理和化学性能差异明显,钛/铝焊接难度大,存在成形困难、接头性能较差等问题。搅拌摩擦焊作为一种固相焊接方法,对克服异种材料性能差异带来的焊接困难具有极大的优势。本文综述了钛/铝异质金属搅拌摩擦焊的研究现状,主要涉及焊缝成形、焊接参数、力学特征、冶金结合和连接机制等,以及衍生的搅拌摩擦焊新技术,为钛/铝异质金属结构的轻量化设计提供新思路,并对其未来发展进行了展望。     

航空发动机吞砂试验标准砂与典型沙粒形貌对比分析

航空发动机工作时吸入沙粒会对发动机造成伤害。针对军标中未规定吞砂试验用砂粒的形貌特征问题,提出砂粒形貌特征的统计表述方法——数字图像获取、砂粒圆度(砂粒图片实际面积与其外接圆面积之比)分析、标尺对比与观察统计、振动转换与跟踪、统计指标比较,选取中国南海(海南)、东海(厦门)、腾格里沙漠和塔克拉玛干沙漠等典型地区的沙粒与美国标准砂的形貌特征进行了对比分析。试验表明:利用标准砂进行航空发动机吞砂试验时发动机的损伤最严重,即按照军标要求采用标准砂进行吞砂试验能够保证发动机具有足够的安全裕度。     

2级脉冲爆震发动机中超声速射流对撞诱导激波聚焦试验研究

为研究2-St age PDE中连续超声速射流及结构参数对撞诱导激波聚焦的影响规律,在冷态条件下开展了2-St age PDE中连续超声速射流对撞诱导激波聚焦的试验。分析了喷口宽度、导流环深度、凹面腔开口端与喷管间距、尾喷管角度、射流入射压力等参数对凹面腔底部峰值压力的影响。结果表明:喷口宽度、导流环深度、凹面腔开口端与喷口间距、射流入射压力越大,凹面腔底部峰值压力越大,激波聚焦效果越好;尾喷管角度越大,凹面腔底部峰值压力越小,激波聚焦效果越差;喷口宽度、导流环深度、射流入射压力对激波聚焦的影响较大。     

基于应变路径非比例度的多轴疲劳寿命预测

在分析多轴疲劳几种常用非比例度定义的基础上,提出了一种非比例度定义方法,进而以American Society of Mechanical Engineers(ASME) 规范案例中非比例加载多轴疲劳设计准则采用的应变参量作为基本损伤参量,发展了一种新的多轴疲劳寿命预测模型.结果表明:①所提出的非比例度定义可以描述任意已知轮廓的、非周期的、变幅的非比例加载路径;②与两种常用的多轴非比例加载疲劳寿命模型的预测结果对比可知,新的寿命预测模型对14种比例和非比例加载路径下304不锈钢材料的寿命预测与试验吻合更好,预测结果基本位于2倍分散带以内.