Al—7%Si合金综合处理及其力学性能的研究

在有效的熔体处理基础上,对Al-Si合金进行适当的微合金化处理,可明显提高Al-Si合金的力学性能,本文通过对Al-7%Si合金精炼,细化,变质处理后,加入Mg,Zr ,V等元素,使合金力学性能大幅度提高。     

Model reference adaptive control with smooth switching scheme for piecewise linear systems and its application in turbofan engine control

A model reference adaptive control (MRAC) with smooth switching scheme was proposed for piecewise linear systems, and the method was utilized in turbofan engine control to avoid the discontinuity of control input. In this scheme, each sub-region of the operating envelope had its own MRAC controller, and smooth indicator function based smooth switching scheme was introduced to switch multiple controllers smoothly at the boundary of adjacent sub-regions. The Lyapunov stability analysis indicated that the proposed smooth switching scheme can guarantee the convergence of the closed-loop system during the controllers switching. The tracking error system was converted into a switched system to analyze the global stability of the closed-loop system. The advantage of the method was that the chattering of system output and instability caused by asynchronous switching can be eliminated. The simulation illustrates the effectiveness of the proposed control scheme in comparison with the existing MRAC controller with gain scheduling for turbofan engine.      

Aerodynamic optimization design of general parameters for cycloidal propeller in hover based on surrogate model

A surrogate-model-based aerodynamic optimization design method for cycloidal propeller in hover was proposed, in order to improve its aerodynamic efficiency, and analyze the basic criteria for its aerodynamic optimization design. The reliability and applicability of overset mesh method were verified. An optimization method based on Kriging surrogate model was proposed to optimize the geometric parameters for cycloidal propeller in hover with the use of genetic algorithm. The optimization results showed that the thrust coefficient was increased by 3.56%, the torque coefficient reduced by 12.05%, and the figure of merit (FM) increased by 19.93%. The optimization results verified the feasibility of this design idea. Although the optimization was only carried out at a single rotation speed, the aerodynamic efficiency was also significantly improved over a wide range of rotation speeds. The optimal configuration characteristics for micro and small-sized cycloidal propeller were: solidity of 0.2-0.22, maximum pitch angle of 25°-35°, pitch axis locating at 35%-45% of the blade chord length.      

CFRP反射器型面主动控制和作动器位置优化

研究了运用压电陶瓷作动器对碳纤维增强复合材料（CFRP）格栅反射器的型面主动控制。首先,采用了一种具有独立电压自由度的梁单元,以及考虑高阶剪切变形的板单元,对主控格栅反射器进行有限元建模;运用能量变分哈密尔顿原理推导了主控格栅反射器的有限元控制方程,并给出了反射面型面残余均方根（RMS）误差最小的电压最优控制方法。然后,研究了在典型载荷下,反射面残余RMS误差最小的PZT作动器位置分布的优化配置问题;提出了一种将遗传算法和梯度投影方法相结合的改进优化方法,用来求出在限定作动器数量的条件下,作动器几何位置的优化配置,使控制后反射面的残余RMS误差最小;给出的数值算例验证了方法的正确性和有效性。最后,研制了格栅反射器型面主动控制的实验样机,针对反射器的初始制造误差进行了型面主动控制,验证了控制方法的可行性和有效性。     

异步电机无速度传感器带速重投策略

在异步电机转速自适应全阶观测器无速度传感器控制方法的基础上,提出了一种基于波波夫稳定性理论的带速重投策略。该策略能够反映出转速估计值与实际值之间的误差关系,并通过自中心向两侧检索的方法使得转速估计值快速地向实际值收敛。采用了一种预励磁方案来达到减小带速重投过程中电流冲击的目的。仿真结果证明了所提策略的准确性和有效性。     

航空发动机吞砂试验标准砂与典型沙粒形貌对比分析

航空发动机工作时吸入沙粒会对发动机造成伤害。针对军标中未规定吞砂试验用砂粒的形貌特征问题,提出砂粒形貌特征的统计表述方法——数字图像获取、砂粒圆度(砂粒图片实际面积与其外接圆面积之比)分析、标尺对比与观察统计、振动转换与跟踪、统计指标比较,选取中国南海(海南)、东海(厦门)、腾格里沙漠和塔克拉玛干沙漠等典型地区的沙粒与美国标准砂的形貌特征进行了对比分析。试验表明:利用标准砂进行航空发动机吞砂试验时发动机的损伤最严重,即按照军标要求采用标准砂进行吞砂试验能够保证发动机具有足够的安全裕度。     

2级脉冲爆震发动机中超声速射流对撞诱导激波聚焦试验研究

为研究2-St age PDE中连续超声速射流及结构参数对撞诱导激波聚焦的影响规律,在冷态条件下开展了2-St age PDE中连续超声速射流对撞诱导激波聚焦的试验。分析了喷口宽度、导流环深度、凹面腔开口端与喷管间距、尾喷管角度、射流入射压力等参数对凹面腔底部峰值压力的影响。结果表明:喷口宽度、导流环深度、凹面腔开口端与喷口间距、射流入射压力越大,凹面腔底部峰值压力越大,激波聚焦效果越好;尾喷管角度越大,凹面腔底部峰值压力越小,激波聚焦效果越差;喷口宽度、导流环深度、射流入射压力对激波聚焦的影响较大。     

一种基于EPLL技术的自适应正交解调技术研究

针对过零检测实现的全数字锁相环不仅锁相速度慢, 而且过零点的扰动会 直接影响锁相精度以及适合模拟电路实现的相干解调技术,在数字电路中实现则需要设 计高阶数字低通滤波器,将占用大量数字电路资源并且会显著增加系统功耗等问题,在 设计一种新型全数字锁相环(All-digital Enhanced Phase-lock Loop,EPLL)的基础上,结合自 适应正交解调技术,提出了一种基于EPLL 技术的自适应正交解调技术方案,并对该方 案进行了研究与仿真。仿真得到了满意的结果,验证了基于EPLL 技术的自适应正交解 调技术方案的可行性,并研究验证了算法的参数变化对其性能的影响,为今后算法在数 字系统中的实现以及其在各领域的应用研究奠定了坚实的基础。     

晃动环境下组合导航系统精度事后评估算法研究

海风、波浪、海流等因素会产生舰船的摇摆晃动,从而给舰船导航系统精度带来严重干扰.固定区间平滑滤波处理算法能够利用观测时间间隔内全部观测信息得到状态的最小方差估计,对导航精度进行事后评估.在研究晃动环境下的SINS/GP S组合导航应用平滑滤波算法的相关原理的基础上,首先利用Kalman滤波器进行组合导航,存储相关信息后按时间逆序利用固定区间平滑滤波算法进行事后分析.该方法可以针对不同的海况以及不同的海上作业需求,有效地为组合导航系统精度提供检验标准,考核各种海洋环境下的导航系统精度.     

基于区域的卷积神经网络在空对地车辆检测中的应用

针对传统空对地车辆检测算法在光照变换、场景变化时检测效果不佳的问题,提出了基于区域卷积神经网络Faster RCNN模型的空对地车辆检测方法,介绍了Faster RCNN模型以及模型训练过程.实验结果表明,基于Faster RCNN的空对地车辆检测方法是可行的,对不同光照和场景下的车辆检测可以取得较好的效果.