混合机织复合材料刚度、强度及低速冲击性能试验研究

将二维机织碳布和单向预浸料碳布按照一定比例铺设成的混合机织复合材料兼具比刚度、比强度高、抗低速冲击损伤以及工艺性好等优点。试验测定不同比例的混合机织复合材料的面内刚度、强度,采用落锤法进行多个能量级别的低速冲击试验和准静态横向压缩试验,用超声波C-扫描法记录各试验件的内部损伤面积,并测量剩余压缩强度,分析这种混合机织复合材料在综合考虑刚度、强度以及低速冲击损伤容限等因素下的最佳铺层比例。     

CVI反应器内部气体流场的有限元模拟及优化设计

采用有限元计算方法,研究了CVI反应器内部的流场特征.对于形状简单的构件,构件的放置方式和阵列对气体的流动状态具有显著的影响.与横向阵列相比,纵向阵列能充分保证构件沿其长度方向流场均匀性,减小回流现象;在反应器中,随着纵向阵列试样数量的增加和分布均匀性的提高,气体流动速度增大,流场均匀性提高.减少反应器内部的自由空间,是提高流场品质和化学气相沉积效果的关键.基于减少反应器内部的自由空间的原则,针对杯形复杂构件,提出了通过加入与其几何形状相适应的导流板工装,有效避免了在构件内部和外部形成回流区,实现流场的优化设计.     

脑力负荷与目标辨认

研究虚拟战斗机驾驶员飞行过程中涉及的监视、计算记忆、攻击和探测4项任务,通过改变工作的快慢节奏来影响脑力负荷,以正确反应率和反应时间来评价和分析被测试者在不同脑力负荷下对目标颜色、形状和位置的辨认情况,为人机界面设计目标编码及确定目标呈现时间提供科学依据;使用脑电图仪测量实验过程中被测试者的生理反应来评价脑力负荷与任务难度的关系.实验结果表明:在需要分配注意力的情况下,人对实验分别选取的3种颜色和形状的辨认不受脑力负荷大小的影响,脑力负荷大小影响人对不同位置的目标辨认;人的目标辨认显著受到目标呈现时间的影响,目标呈现时间越长,反应时间越长;脑电图在一定程度上波的频率和高振幅波能反应脑力负荷大小.     

安装误差角对陀螺加速度表的误差模型的影响

在已建立的陀螺加速度表误差模型的基础上,分析在惯性系统中安装误差角对仪表静态误差模型、动态误差模型和混合误差模型的影响。     

离心机旋转运动对陀螺加速度计测试精度影响研究

应用陀螺力学的基本原理,对陀螺加速度计在离心机上测试时所受到的旋转牵连运动引起的对仪表输出的影响进行了分析,并提出了提高陀螺加速度计在离心机上测试精度的措施。     

异步电机无速度传感器带速重投策略

在异步电机转速自适应全阶观测器无速度传感器控制方法的基础上,提出了一种基于波波夫稳定性理论的带速重投策略。该策略能够反映出转速估计值与实际值之间的误差关系,并通过自中心向两侧检索的方法使得转速估计值快速地向实际值收敛。采用了一种预励磁方案来达到减小带速重投过程中电流冲击的目的。仿真结果证明了所提策略的准确性和有效性。     

Model reference adaptive control with smooth switching scheme for piecewise linear systems and its application in turbofan engine control

A model reference adaptive control (MRAC) with smooth switching scheme was proposed for piecewise linear systems, and the method was utilized in turbofan engine control to avoid the discontinuity of control input. In this scheme, each sub-region of the operating envelope had its own MRAC controller, and smooth indicator function based smooth switching scheme was introduced to switch multiple controllers smoothly at the boundary of adjacent sub-regions. The Lyapunov stability analysis indicated that the proposed smooth switching scheme can guarantee the convergence of the closed-loop system during the controllers switching. The tracking error system was converted into a switched system to analyze the global stability of the closed-loop system. The advantage of the method was that the chattering of system output and instability caused by asynchronous switching can be eliminated. The simulation illustrates the effectiveness of the proposed control scheme in comparison with the existing MRAC controller with gain scheduling for turbofan engine.      

Aerodynamic optimization design of general parameters for cycloidal propeller in hover based on surrogate model

A surrogate-model-based aerodynamic optimization design method for cycloidal propeller in hover was proposed, in order to improve its aerodynamic efficiency, and analyze the basic criteria for its aerodynamic optimization design. The reliability and applicability of overset mesh method were verified. An optimization method based on Kriging surrogate model was proposed to optimize the geometric parameters for cycloidal propeller in hover with the use of genetic algorithm. The optimization results showed that the thrust coefficient was increased by 3.56%, the torque coefficient reduced by 12.05%, and the figure of merit (FM) increased by 19.93%. The optimization results verified the feasibility of this design idea. Although the optimization was only carried out at a single rotation speed, the aerodynamic efficiency was also significantly improved over a wide range of rotation speeds. The optimal configuration characteristics for micro and small-sized cycloidal propeller were: solidity of 0.2-0.22, maximum pitch angle of 25°-35°, pitch axis locating at 35%-45% of the blade chord length.      

Al—7%Si合金综合处理及其力学性能的研究

在有效的熔体处理基础上,对Al-Si合金进行适当的微合金化处理,可明显提高Al-Si合金的力学性能,本文通过对Al-7%Si合金精炼,细化,变质处理后,加入Mg,Zr ,V等元素,使合金力学性能大幅度提高。     

新型磁悬浮振动陀螺的设计与分析研究

振动陀螺是一种利用哥氏效应检测角速度的传感器,其谐振子的结构精度和阻尼均匀性限制了陀螺性能的提升。为减小谐振子结构与支撑锚点的影响,提出了一种全新概念的磁悬浮振动陀螺。该陀螺利用电磁悬浮的方法将谐振子悬空,从而简化了谐振子为无支撑锚点的集中质量块,降低了其结构精度要求,消除了机械结构阻尼,最终达到提升陀螺性能的目的。基于经典振动陀螺模型,理论分析了磁悬浮振动陀螺的基本工作原理,并说明了谐振子误差对陀螺性能的影响规律,设计了新型磁悬浮振动陀螺的结构,并对该结构的磁感应强度进行了仿真分析。仿真结果证明,悬浮质量块振动稳定,具有较好的磁场均匀性。最后对陀螺样机进行了测试,其固有频率为20Hz,标度因子约为1.6mV/[(°)/s],测试结果验证了所提磁悬浮振动结构的陀螺效应。