飞机主起落架的光弹性应力分析

讨论了用光弹性嵌片法（一种新的模型试验方法）进行飞机主起落架的实验应力分析。采用该方法解决了传统光弹性贴片法中的贴片增强效应问题，避免了在贴片边界，因泊松比不匹配引起的误差，从而提高了测试灵敏度。实验应力分析选用了与实物尺寸相同的模型试件，克服了模型制作过程中遇到的许多困难。该方法在一套试验模型上能够直观地进行多种载荷状态下主起落架表面应力场的分析比较，为主起落架结构优化设计方案提供了试验依据，故具有广泛的应用前景．测试数据的计算校核表明，试验结果是可信的，可作为主起落架结构减重修型的重要试验依据。关键词     

有限元动力模型优化的一种方法

本文研究以振动试验测得的飞机结构的固有频率为目标值的有限元动力模型的优化问题。应用了一种迭代优化法,该方法基于动力平衡方程以及正交性。通过修改刚度矩阵的元素来优化,使计算出的固有频率与试验测得的频率值基本一致,并成功地应用于无人机水平尾翼模型上,效果良好。     

生物组织光学参数：优化散射系数（μ’s）的实时在位测定

利用了一套特殊设计光纤探头组成的稳定态光纤光谱仪测试生物组织的光学参数，从悬乳液(Intralpid)与模拟胶(Phantom)实验推导出优化散射系数(Reduced scattering coeffcient：μ’s)近红外谱测量经验公式。测量反射系数就可以计算出优化散射系数谱。计算结果用模拟胶作了验证，并对大鼠脑组织μ’s进行了实时在位测量，从而得到了一种μ’s在位测量的有效方法。     

基于IRL技术的智能采样系统设计

在模拟信号易受干扰、不稳定的环境下 ,普通的采样系统往往不能适用 ,常常会因采样不准确而导致控制电路产生错误的控制信号 ,造成系统运行故障。我们采用基于IRL技术实现的采样电路系统能通过TCP IP远程监控采样电路的状况 ,并能在采样信号出错的情况下通过硬件重构进行信号增益、滤波等处理 ,消除模拟信号因外界干扰带来的变化影响 ,IRL技术给采样系统带来了高安全、高稳定以及易维护的特性     

基于BP网络的热工过程模型辨识方法

主要研究了人工神经网络在辨识火电厂热工过程模型中的应用，利用Visual C^ 语言构造BP神经网络,提出了把BP网络权值转换为传递函数的方法，针对火电厂常见的热工过程，不用人为加入特殊的激励信号，只利用现场生产中自然存在的扰动信号进行辨识试验，试验结果准确可靠。     

极光区电离层Hall电导率的观测及其在E层电子加热情况下的特征

本文利用欧洲的ＥＩＳＣＡＴ雷达观测资料及与这配合的地磁观测数据，用电离层参数直接计算和地面磁场反演两种方法导出了极区电离层Ｈａｌｌ电导率，特别显示出在强对流电场激发的Ｅ层等离子体不稳定波对电子加热情况下，电导率明显增高。     

Energetic ion emission for active spacecraft control

Future space missions aiming at the accurate measurement of cold plasmas and DC to very low frequency electric fields will require that the potential of their conductive surfaces be actively controlled to be near the ambient plasma potential. In the near-Earth space these spacecraft are usually solar-cell powered; consequently, parts of their surface are most of the time exposed to solar photons. Outside the plasmasphere, a positive surface potential due the dominance of surface-emitted photoelectrons over ambient plasma electrons is to be expected. Photo- and ambient electrons largely determine the potential and positive values between a few Volts up to 100 V have been observed. Active ion emission is the obvious solution of this problem. A liquid metal ion emitter and a saddle field ion emitter are nearing the stage of flight unit fabrication. We will attempt to clamp the spacecraft potential to values close to the plasma potential. We present first results from vacuum chamber tests and describe the emission behaviour and characteristics of emitters producing, respectively, In⁺ and N₂⁺ beams with an energy of ≥ 5 keV.     

The detection of energetic cometary and solar particles by the EPONA instrument on the Giotto mission

EPONA is an energetic particle detector system incorporating totally depleted silicon surface barrier layer detectors. Active and passive background shielding will be employed and, by applying various techniques, particles of different species, including electrons, protons, alpha particles and pick-up ions of cometary origin may be detected over a wide spectrum of energies extending from the tens of KeV into the MeV range.

The instrument can operate in two modes namely (a) in a cruise phase or storage mode and (b) in a real time mode. During the real time mode, observations at high spatial (octosectoring) and temporal (0.5s) resolution in the cometary environment permit studies to be made of accelerated particles at the bow shock and/or in the tail of the comet. In conjunction with magnetic field measurements on board Giotto, observations of energetic electrons and their anisotropies can determine whether the magnetic field lines in the cometary tail are open or closed. Further, the absorption of low energy solar particles in the cometary atmosphere can be measured and such data would provide an integral value of the pertaining gas and dust distribution. Solar particle background measurements during encounter may also be used to correct the measurements of other spacecraft borne instruments potentially vulnerable to such radiation.

Solar particle flux measurements, obtained during the cruise phase will, when combined with simultaneous observations made by other spacecraft at different heliographic longitudes, provide information concerning solar particle propagation in the corona and in interplanetary space.     

磁层亚暴膨胀相的近地触发模型

本文指出现有亚暴的中性线模型其源区在赤疲乏面上离地球太远；以ＧＥＯＳ－２的观测资料为依据，提出了亚暴膨胀相的一个近地触发模型－气球模不稳定性模型，该模型认为，在增长相期间到达Ｒ≈（６－１０）ＲＥ的近地等离子体片内边缘区，出现指向地球方向的离子压强梯度，越尾电流强度增大，磁力线向磁尾拉伸。当等离子体片变薄，电子沉降增强，极光带电离层电导率骤增时，气球模不稳定性在近地等离子体片内边缘区被激发，场向电流     

Charged-particle mutagenesis II. Mutagenic effects of high energy charged particles in normal human fibroblasts.

The biological effects of high LET charged particles are a subject of great concern with regard to the prediction of radiation risk in space. In this report, mutagenic effects of high LET charged particles are quantitatively measured using primary cultures of human skin fibroblasts, and the spectrum of induced mutations are analyzed. The LET of the charged particles ranged from 25 KeV/micrometer to 975 KeV/micrometer with particle energy (on the cells) between 94-603 MeV/u. The X-chromosome linked hypoxanthine guanine phosphoribosyl transferase (hprt) locus was used as the target gene. Exposure to these high LET charged particles resulted in exponential survival curves; whereas, mutation induction was fitted by a linear model. The Relative Biological Effect (RBE) for cell-killing ranged from 3.73 to 1.25, while that for mutant induction ranged from 5.74 to 0.48. Maximum RBE values were obtained at the LET of 150 keV/micrometer. The inactivation cross-section (alpha i) and the action cross-section for mutant induction (alpha m) ranged from 2.2 to 92.0 micrometer2 and 0.09 to 5.56 x 10(-3) micrometer2, respectively. The maximum values were obtained by 56Fe with an LET of 200 keV/micrometer. The mutagenicity (alpha m/alpha i) ranged from 2.05 to 7.99 x 10(-5) with the maximum value at 150 keV/micrometer. Furthermore, molecular analysis of mutants induced by charged particles indicates that higher LET beams are more likely to cause larger deletions in the hprt locus.