诊断键合图在液体火箭发动机故障诊断中的应用

研究了通过诊断键合图模型建立液体火箭发动机解析冗余关系的故障诊断方法。通过在液体火箭发动机键合图模型中加入观测信号和虚拟传感器的方法，建立其诊断键合图模型，并利用此模型构建了系统的解析冗余关系。提出了根据诊断键合图因果路径并利用解析冗余关系残差趋势分析建立具有残差变化方向故障特征矩阵的方法，使故障特征值能更好地反映故障特征。最后利用仿真数据对诊断结果进行验证和分析，表明该方法建模简单、诊断速度快、准确性高。     

并联六自由度对接平台运动学标定方法研究

对并联六自由度对接平台的结构参数标走问题进行了研究。通过实测运动平台的位姿变化以及对应六根丝杆的增量，提出了直接确定结构参数的标定方法，与传统标定方法相比，避免了迭代计算与收敛判断。仿真验证表明了所提方法的有效性和实用性。     

压电智能结构传感器/作动器位置优化研究

研究压电主动结构振动控制当中传感器／作动器的位置优化问题。从系统的状态空间方程出发，在系统可控性、可观性Grammian矩阵特征值的基础上来描述性能指标，以控制能量最小化和传感能量最大化作为优化目标，利用遗传算法（GE）进行优化计算，计算过程中对传感器／作动器的位置采用二进制编码加以描述。通过对一压电板结构的仿真计算对该方法进行了验证，优化计算结果与枚举法结果完全相符，从而证明了方法的有效性。     

导弹机动突防滑模制导律

为了得到一种用于导弹机动突防的制导律,我们在制导律设计中令视线角速率跟踪正弦有界震荡信号.在导弹机动突防过程中,导弹自动驾驶仪的惯性滞后会影响制导精度.我们利用递推李雅普诺夫设计方法推导出了一种考虑自动驾驶仪惯性的运动跟踪滑模制导律,它可以令视线角速率跟踪给定的指令信号.仿真结果表明,这种制导律可以令导弹机动突防成功的概率提高到89%,而且在自动驾驶仪滞后情况下的制导精度很高,脱靶量仅有0.3mm.     

低特征信号绝热层用硅氧烷树脂研究

简述了用于固体火箭发动机低特征信号绝热层研制的发展现状。对多种硅氧烷树脂（ＲＴＶ）进行了筛选和信号透过率，热失重，力学及粘接笥能试验。试验结果表明，与使用ＥＰＤＭ绝热层材料相比，使用ＲＴＶ绝热层材料，火箭发动机燃烧室羽流具有较高的信号透过率；ＲＴＶ还具有较好的热性、力学及粘接性能，适于用作低特征信号绝热层的基体材料。     

基于FPGA实现的SAR成像中的方位预滤波

针对SAR成像中的方位预滤波,讨论两种方位预滤波的算法。经比较,“拉格朗日乘子法”滤波器更适合应用到SAR成像中,因为该方法在保证相位特性的同时使成像带宽内信号能量最大、非成像带宽内的信号能量尽可能小,最大限度地保证了成像质量。最后还给出方位预滤波基于FPGA的硬件实现及实测数据成像结果。     

C/C—SiC复合材料的制备与性能

采用化学气相渗透（CVI）法和液相浸渍有机物先驱体混合工艺制备了C／C－SiC复合材料，并对复合材料力学性能、抗烧蚀性能和抗氧化性能进行表征。结果表明：制备的C／C－SiC复合材料在基本保证C／C复合材料力学性能的基础上，抗氧化和抗烧蚀性能得以大幅度提高，提出了制备兼具C／C复合材料与陶瓷材料的技术途径。     

MONITORING OF ENERGETIC PARTICLE ENVIRONMENT INSIDE THE CHINA-BRAZIL EARTH RESOURCE SATELLITE

On 14 October 1999, the Chinese-Brazil earth resource satellite (CBERS-1) was launched in China. On board of the satellite there was an instrument designed at Peking University to detect the energetic particle radiation inside the satellite so the radiation fluxes of energetic particles in the cabin can be monitored continuously. Inside a satellite cabin, radiation environment consists of ether penetrated energetic particles or secondary radiation from satellite materials due to the interactions with primary cosmic rays.Purpose of the detectors are twofold, to monitor the particle radiation in the cabin and also to study the space radiation environment The data can be used to study the radiation environment and their effects on the electronics inside the satelhte cabin. On the other hand, the data are useful in study of geo-space energetic particle events such as solar proton events, particle precipitation and variations of the radiation belt since there should be some correlation between the radiation situation inside and outside the satellite.The instrument consists of two semi-conductor detectors for protons and electrons respectively. Each detector has two channels of energy ranges. They are 0.5-2MeV and ≥2MeV for electrons and 5-30MeV and 30-60MeV for protons. Counting rate for all channels are up to 104/(cm2@s)and power consumption is about 2.5 W. There are also the additional functions of CMOS TID (total integrated dose) effect and direct SEU monitoring. The data of CBMC was first sent back on Oct. 17 1999 and it's almost three years from then on. The detector has been working normally and the quality of data is good.The preliminary results of data analysis of CBMC not only reveal the effects of polar particle precipitation and radiation belt on radiation environment inside a satellite, but also show some important features of the geo-space energetic particle radiation.As one of the most important parameters of space weather, the energetic charged particles have great influences on space activities and ground tech nology. CBMC is perhaps the first long-term on-board special equipment to monitor the energetic particle radiation environment inside the satellite and the data it accnmulated are very useful in both satellite designing and space research.