工艺文件更改及电子文档管理有关问题的讨论

简介了工艺文件更改的控制方法,讨论了工艺文件更改单的签署、填写以及电子文档的管理等问题,并对其具体内容作了阐述。     

多光谱CCD相机的光学配准

文章分析了CCD相机的光学配准原理 ,结合资源后继星CCD相机的特点 ,提出了该相机的光学配准方案 ,并对此方案进行了分析。     

圆形太阳翼模态仿真与试验研究

利用有限元软件SAMCEF实现了圆形太阳翼模态仿真分析，探究了翼面预紧力、约束方式和悬吊弹簧重力卸载系统对太阳翼模态的影响。结果显示，翼面预紧力对太阳翼模态影响较大；支撑车约束方式微小影响太阳翼第一阶模态；有支撑车相比无支撑车，太阳翼第一阶模态频率差值可达32.89%，因此地面试验不能使用支撑车；含悬吊弹簧重力卸载系统可有效减轻重力作用对模态的影响；此外，当弹簧刚度小于7 N/m时，其对太阳翼模态的影响小于0.59‰。随后，采用工作模态法和双点激振方式，经预试验优化地面试验方案；采用正弦扫频方法进行模态测试，获得了圆形太阳翼的前四阶模态振型和固有频率。最后，通过有限元模型修正，使模态仿真结果误差保持在4.16%以内，符合测试相关标准的要求。     

Longitudinal behaviors of the IRI-B parameters of the equatorial electron density profiles retrieved from FORMOSAT-3/COSMIC radio occultation measurements

The electron density profiles in the bottomside F₂-layer ionosphere are described by the thickness parameter B0 and the shape parameter B1 in the International Reference Ionosphere (IRI) model. We collected the ionospheric electron density (N_e) profiles from the FORMOSAT-3/COSMIC (F3/C) radio occultation measurements from DoY (day number of year) 194, 2006 to DoY 293, 2008 to investigate the daytime behaviors of IRI-B parameters (B0 and B1) in the equatorial regions. Our fittings confirm that the IRI bottomside profile function can well describe the averaged profiles in the bottomside ionosphere. Analysis of the equatorial electron density profile datasets provides unprecedented detail of the behaviors of B0 and B1 parameters in equatorial regions at low solar activity. The longitudinal averaged B1 has values comparable with IRI-2007 while it shows little seasonal variation. In contrast, the observed B0 presents semiannual variation with maxima in solstice months and minima in equinox months, which is not reproduced by IRI-2007. Moreover, there are complicated longitudinal variations of B0 with patterns varying with seasons. Peaks are distinct in the wave-like longitudinal structure of B0 in equinox months. An outstanding feature is that a stable peak appears around 100°E in four seasons. The significant longitudinal variation of B0 provides challenges for further improving the presentations of the bottomside ionosphere in IRI.     

切削过程稳定性的研究现状

研究切削过程振动产生的原因和种类,并合理选择切削参数和加强刀具的切削性能来减轻刀具在金属切削过程中振动的具体措施是很有必要的,从而保证加工过程动态平稳性,实现高质量、高效率生产的要求。     

公务员援助计划的实施模式与运行路径

公务员援助计划(EAP)是一项旨在防治公务员身心问题,提高行政效率,推动行政管理体制改革的现代人力资源管理方法.政府对EAP的现实需求以及EAP服务技术的成熟使其在政府部门的引入和实施变得迫切和可行.我国公务员援助计划宜采用外主内辅模式、共同委托模式和联合模式交叉运用的实施模式,在具体操作上,政府部门运行公务员援助计划需要从引入前的准备、EAP的具体实施和后期评估三个环节入手.     

航空数据库适航审定政策研究

航空数据库（Aeronautical Database）作为实现航空器导航、避障和指引功能的重要部分，其数据结 构遵循特定格式的标准。航空数据库的质量将直接影响到航空器的运行安全。当前民航适航体系针对原始数据 及后续处理过程的质量体系的审定缺乏实际经验，给机载设备和飞机运行的适航性带了挑战。本文首先介绍当 前世界范围内航空数据库适航管理的办法及技术标准，再结合当前国内航空数据库的审定的现状，提出一种可 行的中国航空数据库适航审定的政策建议，供国内各类航空数据库的研制单位及审查方参考。     

Cortical Microtubule Reorientation and Its Relation to Cell Surface Texture of Epidermal Cells of Arabidopsis Thaliana Hypocotyls under Simulated Microgravity Conditions

Gravitropic curvature growth of Arabidopsis hypocotyls mainly occurred in the rapid growing Elongation Zone (EZI), not in the slow-growing Elongation Zone (EZⅡ). By examining reorientation of Microtubules (MT) and phenotype of the cell wall in the EZI and the EZⅡ of Arabidopsis hypocotyls under normal gravitational condition, it is found that MTs in the rapid growing epidermal cells were mainly in the transverse direction, while those in the non-growing epidermal cells were in the longitudinal directions. However, this difference in cortical MT arrays between the EZI and EZⅡ cells disappeared when the seedlings were exposed to the simulated microgravity condition on a horizontal clinostat. Field emission scanning electron microscopy revealed that the surface texture of epidermal cells, like the direction of the MT, in the EZI and the EZⅡ also became similar when exposed to the simulated microgravity condition. This result indicated that simulate microgravity could modify the potential differentiation between the EZI and the EZⅡ by affecting the orientation of cortical MT in the epidermal cells.      

基于ANCF的松弛绳索动力学建模与仿真

传统绝对节点坐标方法(ANCF)绳索模型是基于梁单元建立的,其不能反映纤维绳索的不可抗压和松弛特性。考虑纤维绳索初始松弛余量,给出了绳索非线性轴向应力-应变关系。绳索在松弛状态下轴向力接近于零,在张紧状态下表现出线弹性特性。在此基础上,采用绝对节点坐标方法推导了松弛绳索动力学模型。通过静力学和动力学仿真,将传统绳索模型和松弛绳索模型进行对比,结果表明:在重力及不同集中载荷作用下,松弛绳索相比于传统绳索都具有更大的变形;分析移除集中载荷后绳索的动力学响应可知,传统绳索在振动过程中始终处于张紧状态,且绳索上各点振动同步,而松弛绳索会在张紧和松弛状态之间不断转换,绳索上各点的振动存在相位差,能够更好地反映绳索在松弛状态下的动力学特性。