飞机座舱工效学综合评价研究及其应用

飞机座舱工效学综合评价是座舱研制中一个极其重要的问题.以往座舱研制过程中往往为其工程质量提出种种衡量标准而忽视了工效学综合评价,常导致设计出的座舱存在不少工效学方面的问题,原因在于没有合适的、可操作的评价方法和评价指标来指导座舱的工效学评价.针对此问题,提出了一种综合评价的方法体系.该体系能够实现征求和提炼专家群体的意见,考虑了工效学评价的模糊性,能较客观、科学的对飞机座舱工效学进行定量地综合评价,为比较类似设计方案的优劣提供了理论基础和方法.应用此方法,结合研究项目,对某型号飞机座舱尺寸设计的工效学进行了评价.评价结果得到了航空工程部门专家的认可.     

机载吊舱电动逆升压式空气循环制冷系统研究

机载制冷系统可为电子设备提供制冷.由于机载吊舱的特点,机载吊舱制冷系统的结构和工作原理与传统机载制冷系统差别很大.介绍了现有机载吊舱空气循环制冷系统的不同方案,针对其制冷量偏低、无地面制冷能力等不足,提出了2?kW等级高速电机驱动的逆升压式空气循环制冷方案,详细阐述了其设计思想、工作原理和组件结构设计方法,并进行了制冷性能及性能代偿损失计算.结果表明,这种新型系统结构紧凑,耗电量小,工作可靠,可提高制冷性能.该系统受飞机飞行状态影响小,可提供地面冷却能力,是一种较有应用前景的机载吊舱环境控制系统.     

Monotonicity-Preserving激波捕捉格式在湍流大尺度模拟中的评估

对高阶激波捕捉格式的性能进行了系统的测评,重点分析了Suresh和Huynh(1997)所提出的Monotonicity-Preserving格式的性能.结果表明Monotonicity-Preserving格式的性能显著优于原始WENO(Weighted Essentially Non-Oscillatory) 格式,和改进型WENO格式相当.对格式的分析进一步表明,迎风型的激波捕捉格式在湍流模拟方面的性能都不及高阶中心格式,其原因归结为激波捕捉格式所包含的线性和非线性耗散.因此,改进高阶激波捕捉格式的关键在于同时降低格式的线性耗散和非线性耗散,以提高格式对湍流脉动能量的保持和对小尺度脉动结构的捕捉能力.     

基于IP核的PCIE总线接口逻辑的设计和实现

使用PCIE总线进行设备间互联时,需要设计接口逻辑实现PCIE总线与内部功能的交互,采用一种基于IP核的方法,在Xilinx Virtex-7系列FPGA上完成了PCIE总线接口逻辑的设计和实现,并进行了功能和性能验证,结果表明逻辑能够正确进行寄存器访问和DMA传输,且DMA传输带宽能达到PCIE总线带宽的70%以上.     

Drilling load modeling and validation based on the filling rate of auger flute in planetary sampling

Some type of penetration into a subsurface is required in planetary sampling. Drilling and coring, due to its efficient penetrating and cuttings removal characteristics, has been widely applied in previous sampling missions. Given the complicated mechanical properties of a planetary regolith, suitable drilling parameters should be matched with different drilling formations properly. Otherwise, drilling faults caused by overloads could easily happen. Hence, it is necessary to estab-lish a drilling load model, which is able to reveal the relationships among drilling loads, an auger's structural parameters, soil's mechanical properties, and relevant drilling parameters. A concept for the filling rate of auger flute (FRAF) is proposed to describe drilling conditions. If the FRAF index under one group of drilling parameters is less than 1, this means that the auger flute currently removes cuttings smoothly. Otherwise, the auger will be choked with compressed cuttings. In dril-ling operations, the drilling loads on the auger mainly come from the conveyance action, while the drilling loads on the drill bit primarily come from the cutting action. Experiments in one typical lunar regolith simulant indicate that the estimated drilling loads based on the FRAF coincide with the test results quite well. Based on this drilling load model, drilling parameters have been opti-mized.     

增量成形研究进展

重点综述了新型增量成形技术中的4类典型成形工艺,即局部不均匀加载下板面内弯曲增量成形、单点增量成形、多点柔模成形、高速冷滚打成形就其成形原理、工艺、设备及研究现状等方面的研究成果,并提出了这类新型增量成形的研究方向.     

New Neural Network Response Surface Methods for Reliability Analysis

This article presents two new kinds of artificial neural network (ANN) response surface methods (RSMs): the ANN RSM based on early stopping technique (ANNRSM-1), and the ANN RSM based on regularization theory (ANNRSM-2). The following improvements are made to the conventional ANN RSM (ANNRSM-0): 1) by monitoring the validation error during the training process, ANNRSM-1 determines the early stopping point and the training stopping point, and the weight vector at the early stopping point, which corresponds to the ANN model with the optimal generalization, is finally returned as the training result; 2) according to the regularization theory, ANNRSM-2 modifies the conventional training performance function by adding to it the sum of squares of the network weights, so the network weights are forced to have smaller values while the training error decreases. Tests show that the performance of ANN RSM becomes much better due to the above-mentioned improvements: first, ANNRSM-1 and ANNRSM-2 approximate to the limit state function (LSF) more accurately than ANNRSM-0; second, the estimated failure probabilities given by ANNRSM-1 and ANNRSM-2 have smaller errors than that obtained by ANNRSM-0; third, compared with ANNRSM-0, ANNRSM-1 and ANNRSM-2 require much fewer data samples to achieve stable failure probability results.     

泄爆面积对连通容器预混气体泄爆影响的实验研究

在大小两个体积不等的球形容器和圆形管道组成的连通容器中,开展连通容器泄爆实验,研究连通容器等泄爆面积条件下的火焰传播和压力变化情况。结果表明：火焰从起爆容器加速传播到传爆容器,但由于容器的开口泄爆,火焰传播速率小于密闭爆炸的火焰传播速率;随泄爆面积的减小,连通容器的泄爆压力和压力上升速率均增加;连通容器爆炸受管道火焰加速和压力累积作用,在相同泄爆面积条件下,容器的最大泄爆压力和最大压力上升速率高于单个容器爆炸时的最大泄爆压力和最大压力上升速率,特别是当小容器为传爆容器时,差别更加明显,不能用单个容器的泄爆设计方法来指导连通容器的泄爆。     

一种高精度航空结构多主体协作冲击定位方法

为了提高结构冲击载荷定位的精度和实时性,针对声发射和逆问题分析两类方法的优点和不足,结合多主体技术提出了一种高精度航空结构多主体协作冲击定位方法.两类冲击定位方法自主并行工作,通过黑板协作融合,彼此通信交互消息,参考优化定位结果,保证位置精度的同时提高了实时性.在大型航空铝板上的实验表明,该冲击载荷定位方法快速有效,具有很好的鲁棒性.