六轴联动电火花加工电极的动态规划

本文提出了一种加工复杂构型的整体涡轮通道的创新思路，首先依据求解最优控制理论的现代变分法建立了电极成形运动的变分模型，根据动态规划原理提出了这一类变分问题的数值解法，并运用实例验证了所提出的这一创新思想的可行性及有效性。     

建立我国第四方物流新模式的探讨

在分析第三方物流模式不足的基础上，提出用第四方物流模式解决我国物流“瓶颈”和弥补第三方物流不足的建议，并探讨了我国发展第四方物流模式的基本思路。     

Mechanical properties study of particles reinforced aluminum matrix composites by micro-indentation experiments

By using instrumental micro-indentation technique, the microhardness and Young's modulus of SiC particles reinforced aluminum matrix composites were investigated with microcompression-tester(MCT). The micro-indentation experiments were performed with different maximum loads, and with three loading speeds of 2.231, 4.462 and 19.368 mN/s respectively. During the investigation, matrix, particle and interface were tested by micro-indentation experiments. The results exhibit that the variations of Young's modulus and microhardness at particle, matrix and interface were highly dependent on the loading conditions(maximum load and loading speed) and the locations of indentation. Micro-indentation hardness experiments of matrix show the indentation size effects, i.e. the indentation hardness decreased with the indentation depth increasing. During the analysis, the effect of loading conditions on Young's modulus and microhardness were explained. Besides, the elastic–plastic properties of matrix were analyzed. The validity of calculated results was identified by finite element simulation. And the simulation results had been preliminarily analyzed from statistical aspect.     

一种基于滑模非奇异的反舰导弹导引律的设计与仿真

提出了一种反舰导弹滑模非奇异导引律。根据反舰导弹弹道的运动学分析方法,建立了弹目相对运动的数学模型。在非奇异理论的基础上,推导出具有带落角约束的滑模非奇异导引律。通过仿真,表明了该导引律能同时满足脱靶和落角的性能指标,具有优良的鲁棒性,脱靶量更小,精度更高。相比传统的比例导引律,具有更强的实用性和有效性。     

Optimization of structural parameters for elliptical cross-section spiral equal-channel extrusion dies based on grey theory

The elliptical cross-section spiral equal-channel extrusion (ECSEE) process is simulated by using Deform-3D finite element software. The ratio m of major-axis to minor-axis length for ellipse-cross-section, the torsion angle u, the round-ellipse cross-section transitional channel L1, the elliptical rotation cross-section transitional channel L2 and the ellipse-round cross-section transitional channel L3 are destined for the extrusion process parameters. The average effective strain eave on cross-section of blank, the deformation uniformity coefficient a and the value of maximum damage dmax are chosen to be the optimize indexes, and the virtual orthogonal experiment of L16 (45) is designed. The correlation degree of the process factors affecting eave, a and dmax is analyzed by the numerical simulation results using the weights and grey association model. The process parameters are optimized by introducing the grey situation decision theory and the ECSEE optimal combination of process parameters is obtained: u of 120 , m of 1.55, L1 of 7 mm, L2 of 10 mm, and L3 of 10 mm. Simulation and experimental results show that the material can be refined with the optimized structural parameters of die. Therefore, the optimization results are satisfactory.     

战场复杂电磁环境下的无人机作战应用探讨

通过对战场复杂电磁环境的研究,分析总结无人机系统在侦察作战全过程中可能受到各种电磁干扰,结合无人机系统抗干扰特性,提出应对战场复杂电磁环境的无人机系统作战运用方法,有效提高了无人机在战场中的作战效能和生存能力。     

Detached-eddy simulation of supersonic flow past a spike-tipped blunt nose

Space vehicle in atmosphere travels mostly at supersonic speed and generates a very strong bow shockwave around its blunt nose. Oblique shock and conical separated flow zone generated by a forward disk-tip spike significantly reduce the drag by reducing the high pressure area on the blunt nose. This study employs improved delayed detached eddy simulation to investigate the characteristic flow structures around a spike-tipped blunt nose at Mach number of 3 and Reynolds number(based on the blunt-body diameter) of 2.72x10~8. The calculated time-averaged quantities agree well with experimental data. Characteristic frequencies in different flow regions are extracted using fast Fourier transform. It is found that two distinct instability modes exist: oscillation mode and pulsation mode. The former is related to the foreshock/turbulence interaction with nondimensional frequency at around 0.004. The latter corresponds to the interaction between turbulence and shock structures around the blunt nose, with a typical coherent structure shedding frequency at 0.092.     

重力和重力梯度基准图构建的多参量联合网格化

高精度、高分辨率的重力及重力梯度基准图是决定潜艇水下辅助导航定位精度的关键因素。我国海洋重力测量目前的主要比例尺为1:1000000，在局部区域可达1:500000，测线间隔分布相对稀疏。传统的网格化插值技术在远离测点位置时容易产生虚假异常，或异常特征发生偏移。构建了全张量重力梯度数据的6个梯度分量的联合网格化方法,利用各个梯度分量与引力位在波数域中的关系重构了引力位，实现了重力和重力梯度数据的再计算，从而实现了网格处理。通过模型数据和实测数据，验证了该方法在插值异常分辨率和位置准确性上具有优势。