基于管制员工作负荷的扇区开合阀设置研究

对扇区空域实施灵活的开合管理是当前提升空域利用率的主要方法之一,利用实时的空域容量和流量信息可为扇区的开合提供预警信息,提升人力资源的利用率和紧急情况下流量波动的应对能力。基于Wick‐ens的信息处理与认知模型,构建管制员注意力资源与管制工作负荷的关系;基于仓室（SIR）模型,建立管制员注意力资源与管制工作负荷的动力...     

基于IP核的PCIE总线接口逻辑的设计和实现

使用PCIE总线进行设备间互联时,需要设计接口逻辑实现PCIE总线与内部功能的交互,采用一种基于IP核的方法,在Xilinx Virtex-7系列FPGA上完成了PCIE总线接口逻辑的设计和实现,并进行了功能和性能验证,结果表明逻辑能够正确进行寄存器访问和DMA传输,且DMA传输带宽能达到PCIE总线带宽的70%以上.     

Drilling load modeling and validation based on the filling rate of auger flute in planetary sampling

Some type of penetration into a subsurface is required in planetary sampling. Drilling and coring, due to its efficient penetrating and cuttings removal characteristics, has been widely applied in previous sampling missions. Given the complicated mechanical properties of a planetary regolith, suitable drilling parameters should be matched with different drilling formations properly. Otherwise, drilling faults caused by overloads could easily happen. Hence, it is necessary to estab-lish a drilling load model, which is able to reveal the relationships among drilling loads, an auger's structural parameters, soil's mechanical properties, and relevant drilling parameters. A concept for the filling rate of auger flute (FRAF) is proposed to describe drilling conditions. If the FRAF index under one group of drilling parameters is less than 1, this means that the auger flute currently removes cuttings smoothly. Otherwise, the auger will be choked with compressed cuttings. In dril-ling operations, the drilling loads on the auger mainly come from the conveyance action, while the drilling loads on the drill bit primarily come from the cutting action. Experiments in one typical lunar regolith simulant indicate that the estimated drilling loads based on the FRAF coincide with the test results quite well. Based on this drilling load model, drilling parameters have been opti-mized.     

三角嵌铺粒子追踪算法的三维化扩展

针对连续帧三维流场粒子的匹配问题,对基于三角嵌铺的粒子追踪算法进行了三维化扩展并将其命名为3DT PTV。3DT PTV遵循从粒子样型匹配到粒子匹配的原则,即粒子匹配结果从粒子样型匹配结果中总结。首先通过自定义"粒子样型DT网格"实现了粒子样型匹配的参数无依赖性,使3DT PTV适用于粒子非均匀分布流场;其次通过自定义"样型唯一性标识向量"进行粒子样型匹配;最终通过"双向计算-概率择优"模块对样型匹配结果进行样本扩展并整合出粒子匹配。通过添加自定义干扰的JPIV人工流场对3DT PTV进行了检验。除了算法本身的简洁性,结果亦证明了3DT PTV处理粒子无匹配率较高的复杂流动的良好特性。     

Inner wrinkling control in hydrodynamic deep drawing of an irregular surface part using drawbeads

Inner wrinkling phenomenon is more likely to develop during hydrodynamic deep drawing （HDD） of complicated component-forms due to the higher demand for controlling deformation sequences. Aiming at the problems in control of inner wrinkling for an irregular surface part featured with both concavity and convex, this research proposes an optimal design method of drawbead parameters to change the material flow. According to theoretical analysis of the mechanism of inner wrinkling, optimizing cavity pressure only is unreasonable to form a wrinkle-free deep-drawn part, so semi-circular drawbeads are employed. The effects of layout and height of drawbeads on forming results are discussed, and a process window is established based on evaluation indicators including the anti-wrinkle coefficient and the minimum wall thickness. Experiments are carried out to validate the process window, and the wall thickness and the wrinkle height are measured and compared with numerical findings. The results show that the anti-wrinkle ability of drawbeads weakens with increasing oblique angle and distance from the die center, while the wall thickness increases with increasing oblique angle and distance, and the inner wrinkling can be completely suppressed by drawbeads arranged in zones I and II with optimum penetration.     

非对称超声速来流下矩形转圆隔离段研究

为了适应超燃冲压发动机模块化设计及圆形燃烧室的需求,隔离段必须设计成矩形截面渐变为圆形出口的形状。发展了一种基于超椭圆曲线的截面渐变方法,以此设计了矩形转圆隔离段,开展了数值模拟研究并进行了在Ma=2.1且来流条件非对称下的矩形转圆隔离段吹风实验。研究结果表明:在反压相同时,两种不同来流条件下矩形转圆隔离段的出口总压恢复系数较等直矩形隔离段分别提高了4%和5%;在非对称来流实验条件下,矩形转圆隔离段壁面沿程压力分布规律与等直矩形隔离段压力分布规律趋势一致,上壁面沿程压力曲线前部呈波动式上升,后半部上升平缓,而下壁面沿程压力曲线整体上升较为平缓,随着出口反压的增大,总压恢复系数随之减小,矩形转圆隔离段最大能够承受4.1倍的来流静压,极限反压状态下出口总压恢复系数为0.505。     

民用飞机试飞规划与管理技术研究

梳理了通用的民机试飞需求类型,讨论了民机试飞任务分工和试飞计划制订原则,分析了民机试飞科目特点和逻辑关系,研究并提出了一种民机试飞任务优化方法,系统地阐述了试飞规划与管理体系,实现了民机试飞的闭环控制,解决了国内试飞规划中未能系统研究的问题,并创建了一套具有国际先进水平的民机试飞规划与管理系统(Flight Test Control System,简称"FTCS")。FTCS已在实际型号试飞工作中得到了验证和应用,起到了减少试飞架次和提高试飞效率的作用,具有实际的工程应用意义。     

一种高精度航空结构多主体协作冲击定位方法

为了提高结构冲击载荷定位的精度和实时性,针对声发射和逆问题分析两类方法的优点和不足,结合多主体技术提出了一种高精度航空结构多主体协作冲击定位方法.两类冲击定位方法自主并行工作,通过黑板协作融合,彼此通信交互消息,参考优化定位结果,保证位置精度的同时提高了实时性.在大型航空铝板上的实验表明,该冲击载荷定位方法快速有效,具有很好的鲁棒性.     

基于单应视差的月面着陆区离面测量及平坦性分析

文章针对月球探测器的软着陆,提出了基于由平面诱导的单应视差的月面着陆区离面距离测量及平坦性分析方法.对于特征点分布不均匀情况,采用邻近特征点内插方法在全图强制性近似均匀选择点云作为兴趣点,用基于极线约束和单应约束融合的方法匹配纹理不丰富的兴趣点.使用由平面诱导的单应视差计算兴趣点的离面距离,以离面距离的最大值、绝对值的...     

型号标准化文件体系的建立与管理

概述型号标准化文件体系的内涵、特点、作用以及文件体系的组成,阐明型号标准化文件体系与企业标准体系以及型号文件系统的关系.介绍型号标准化文件体系的运行与管理.